• Non ci sono risultati.

ChAMBRe – the development of an atmosferic simulation chamber for bioaerosol studies and aerosol optical properties investigation

N/A
N/A
Protected

Academic year: 2021

Condividi "ChAMBRe – the development of an atmosferic simulation chamber for bioaerosol studies and aerosol optical properties investigation"

Copied!
1
0
0

Testo completo

(1)

ChAMBRe – the development of an atmosferic simulation chamber for bioaerosol

studies and aerosol optical properties investigation

P.Brotto 1,2, E.Gatta2, F.Parodi1, M.C. Bove1,2, D.Massabò1,2, V.Vigo1 and P.Prati1,2 1 National Institute of Nuclear Physics (INFN), Genoa Department, Genoa, 16146, Italy

2 Department of Physics, University of Genoa, Genoa, 16146, Italy

Keywords: Atmospheric chambers, bioaerosol, aerosol optical properties, instrument testing Presenting author email: brotto@ge.infn.it

Environmental simulation chambers are small to large-scale facilities where atmospheric conditions can be monitored in real-time under control to reproduce realistic environments and to study interactions among their constituents. Up to now, they have been used mainly to study chemical and photochemical processes that occur in the atmosphere, but the high versatility of these facilities allows for a wider application covering all fields of atmospheric aerosol science.

ChAMBRe (Chamber for Aerosol Modelling and Bio-aerosol Research) is the stainless steel atmospheric simulation chamber (volume approximately 3 m3, see

Figure 1) recently installed at the National Institute of Nuclear Physics in Genoa (INFN-Genova) in collaboration with the Environmental Physics Laboratory at the Physics Department of Genoa University (www.labfisa.ge.infn.it).

The scientific activities at ChAMBRe focus on the following topics:

1) Bioaerosol properties A strong improvement in the understanding of bioaerosol behaviour can be provided by atmospheric chamber experiments, that allow for a scientific intermediate approach between “in vitro” and “in vivo” analysis. Aerosol with realistic composition, including living micro-organisms, can be injected in artificial environments with controlled physical and chemical parameters and then accurately analyzed. In particular, a systematic approach can be used for a better description of micro-organisms viability, of colonies growing modulation and other issues relevant to their spread and their pathogenicity. Very promising results in this direction were obtained by the authors at the CESAM facility at CNRS-LISA (Brotto et al. 2015), while similar results were obtained nearly at the same time at AIDA chamber at KIT (Amato et al. 2015).

ChAMBRe experiments are carrying on this path to contribute in getting a deeper understanding of the still unclear mechanisms that control the evolution of bioaerosols in atmosphere and in particular of their bacterial components.

2) Aerosol optical properties – methodologies and

instruments testing The instrumental development

efforts at the Environmental Physics Laboratory of the University of Genoa, recently resulted in a new Multi Wavelength Absorbance Analyser (Massabò et al. 2015) which measure the light absorption on aerosol loaded filters at five wavelengths from UV (absorption bands of organic compounds, mineral dust) to near infrared (carbon soot,…). Furthermore, a new data reduction methodology has been introduced to disentangle the concentration of Black and Brown carbon in atmospheric aerosol, demonstrating the need to mitigate not only exhaust but also non-exhaust emissions, as a potentially important source of PM10. The atmospheric chamber is an effective tool to produce known aerosol mixtures and to test the performance of the optical technology. Actually, there is an on-going collaboration with the CNRS-LISA team working at CESAM following that procedure that will be soon replicated at ChAMBRe facility.

ChAMBRe has recently joined the Eurochamp consortium, the European atmospheric chamber facilities network. The network activities have been included in an infrastructure-oriented research project proposal that is going to be submitted within March 2016 to the H2020-INFRAIA call within EU Horizon 2020 Programme. We would like to acknowledge prof. J.F. Doussin and LISA laboratories (http://www.lisa.univ-paris12.fr/en) for providing us part of the chamber structure and for the very useful and fruitful technical discussions.

Amato, P., Joly, M., Schaupp, C., Attard, E., Möhler, O., Morris, C. E., Brunet, Y.., and Delort, A.-M., Atmos. Chem. Phys. Discuss., 15, 4055-4082, doi:10.5194/acpd-15-4055-2015, 2015

Brotto P, Repetto B, Formenti P, Pangui E, Livet A, Boussherrine N, Martini I, Varnier O, Doussin JF, Prati P (2015), Aerobiologia, 31, 445-455 doi:0.1007/s10453-015-9378-2

Massabò D, Caponi L, Bernardoni V, Bove MC, Brotto P, Calzolai G, Cassola F, Chiari M, Fedi ME, Fermo P, Giannoni M, Lucarelli F, Nava S, Piazzalunga A, Valli G, Vecchi R, Prati P (2016), Atmospheric Environment, doi:10.1016/j.atmosenv.2015.02.058

Riferimenti

Documenti correlati

LNF  high luminosity DAΦNE ϕ-factory, and facilities for particle and nuclear physics (rare kaon decays, standard model, hyper-nuclear physics, exotic atoms), test

The figure shows the masses of the particles of the standard model already known (electrons, muons, tau, different types of quarks, neutrinos, Higgs boson, etc.), those of other as

The LHC results have so far confirmed the validity of the Standard Model of particle physics up to unprecedented energy scales and with great precision in the sectors of strong

Measurements of top quark spin observables in t¯ t events using dilepton final states in √ s = 8 pp collisions with the ATLAS detector. Measurement of Spin Correlation in

Our global analysis of Ca and carbonate alkalinity concentrations in lakes and running waters shows that Ca and carbonate alkalinity generally strongly co-vary with

The selected candidate will be recruited by the Italian National Institute of Nuclear Physics under an employment contract of a limited/fixed duration of thirty-six (36)

In order to achieve the first step, the GLVs issued in 2004, and submitted to the CVI (i) two unified reports, on the Scientific Contents and on the SE&I impact of

– An un-binned maximum-likelihood fit including a tagging probability is performed to extrapolate the signal and the fitted values of the physical parameters obtained on 4.9 fb −1