• Non ci sono risultati.

Azobenzene-based Biomaterials as Dynamic Cell Culture Systems

N/A
N/A
Protected

Academic year: 2021

Condividi "Azobenzene-based Biomaterials as Dynamic Cell Culture Systems"

Copied!
123
0
0

Testo completo

Loading

Figura

Figure 1.8 The proposed mechanism for SRG formation during laser irradiation, involving at least three processes: A) the  polymer photo-fluidization in illuminated regions, B) the mass displacement from illuminated to dark regions and C) the  inverse mass
Figure 1.9 a) Surface deformation induced by Linear polarization Gaussian beams with low intensity and b) with high  intensity
Figure 1.10 Surface deformation induced by a one-dimensional Gaussian beam. (Reprinted from Applied Physics
Figure 1.14 AFM images of hexagonal structures for a) vertically, b) horizontally, and c) circularly polarized incident  laser beam
+7

Riferimenti

Documenti correlati

v  a cell is maximal if it is not a face of another cell v  a k-complex is maximal iff all maximal cells.. have

 All minimal area surfaces have mean curvature 0.  The surface tension of an interface, like a soap bubble, is proportional to its

Fig 27 Statistca invio SMS durante il periodo di sperimentazione 84. Fig 28 Possibile evoluzione della struttura

Si horizon in sphaera orbis et apparens sphaerae ac non appa- rens obliquus fuerit ad axem; qui axi ad rectos sunt angulos or- bes secantes horizontem in eisdem punctis

The results of this trial confirm the validity of the curve subtraction method to study the fermentation kinetics of the neutral detergent soluble fraction of forages and to

Assuming different types for the boundedly rational agent that differ in categories used, we show that during his interaction, the fully rational agent may learn about

(2017) method that provides precipitation in ethanol and vacuum drying. 3.3: Gelatin methacrylate hydrogel: on the left the one coming from the lyophilized polymer, on the right

Geometry G4 and G5 are designed to study the dissolution behaviour of geometries with same dimensions c, d and e but different dimension b (width between holes).. Moreover, to confirm