[1] Nuclear Energy Research Initiative (NERI), “The Secure Transportable Autonomous Light Water Reactor—STAR-LW (IRIS Project)”, 2002 Annual Report.

181

BIBLIOGRAFIA

[1] Nuclear Energy Research Initiative (NERI), “The Secure Transportable Autonomous Light Water Reactor—STAR-LW (IRIS Project)”, 2002 Annual Report.

[2] “Technology Roadmap For Generation IV Nuclear Energy Systems”, Issued by the U.S.

DOE Nuclear Energy Research Advisory Committee and the Generation IV International Forum, December 2002.

[3] M. D. Carelli, et al., “The Design and Safety Features of the IRIS Reactor”, Proc. 11th Int.

Conf. on Nuclear Engineering (ICONE-11), Tokyo, Japan, April 2003.

[4] M. D. Carelli, “Final Technical Progress Report”, November 2003.

[5] M. D. Carelli, “IRIS: A global approach to nuclear power renaissance”, September 2003.

[6] M. D. Carelli, L. E. Conway, J. Collado, L. Cinotti, A. Barroso, M. Moraes, C. Lombardi, J. Kujawski, “Integral Layout of the IRIS Reactor”, Proceeding of International Congress on Advances in Nuclear Power Plants (ICAPP03), Cordoba (Spain), May 4-7, 2003.

[7] J.M. Kujawski, D.M. Kitch, L.E. Conway, “The IRIS Spool-type Reactor Coolant Pump”, Proc. 10th Int. Conf. on Nuclear Engineering (ICONE-10), Arlington, USA, April 14-18, 2002, ASME.

[8] A.C.O. Barroso, et al., “IRIS Pressurizer Design”, Proceeding of International Congress on Advances in Nuclear Power Plants (ICAPP03), Cordoba (Spain), May 4-7, 2003.

[9] L.Cinotti, F.L.Rizzo, “The Inherently Safe Immersed System (ISIS) reactor”, Nuclear Engineering and Design, vol.143, pp.295-300, May 1993.

[10] L. Cinotti, M. Bruzzone, N. Meda, G. Corsini, L.E. Conway, C. Lombardi, M.E. Ricotti,

“Steam Generator of the International Reactor Innovative and Secure”, Proc. 10

Int.

Conf. on Nuclear Engineering (ICONE-10), Arlington, USA, April 14-18, 2002, ASME.

[11] S.J.Green, G.Hetsroni, “PWR Steam Generators”, International Journal of Multiphase Flow, vol.21, pp.1-97, February 1995.

[12] EPRI Steam Generator Progress Report, Revision 133, Electric Power Research Institute, Palo Alto, CA, May 1998.

[13] D.R.Diercks, J.Muscara, W.J.Shack, “Overview of steam generator tube degradation and integrity issues”, Nuclear Engineering and Design, vol.194, pp.19-30, June 1999.

[14] B.L.Dow, J.Benson, “Keeping Watch on Steam Generators”, Nuclear Engineering International, April 2001.

[15] F.Ammann, U. Hollwedel, “Steam Generator desludging”, Nuclear Engineering

International, August 2001.

182 [16] Kenneth Chuck Wade, “Steam Generator Degradation and Its Impact on Continued

Operation of Pressurized Water Reactors in the United States”, Energy Information Administration/Electric Power Monthly, August 1995.

[17] D.R.Diercks, J.Muscara, W.J.Shack, “Steam generator tube integrity program”, Nuclear Engineering and Design, vol.165, pp.143-149, February 1996.

[18] Robert Comby, “Secondary side corrosion in steam generator tubes: lessons learned in France from the in-service inspection results”, Nuclear Engineering and Design, vol.168, pp.255-259, 1997.

[19] Philip Tipping, “Lifetime and ageing management of nuclear power plants: a brief overview of some light water reactor component ageing degradation problems and ways of mitigation”, International Journal of Pressure Vessel & Piping, vol.66, pp.17-25, 1996.

[20] Saurin Majumdar, “Prediction of structural integrity of steam generator tubes under severe accident conditions”, Nuclear Engineering and Design, vol.194, pp.31-55, November 1998.

[21] T.L.Anderson, “Fracture Mechanics – Fundamentals and Applications”, Department of Mechanical Engineering Texas A&M University, CRC Press, 1995.

[22] David Broek, “The Practical Use of Fracture Mechanics”, Kluwer Academic Publishers, Netherlands, 1989.

[23] H.L.Ewalds, R.J.H.Wanhill, “Fracture mechanics”, Arnold publication, 1989.

[24] B.D.Annin,G.P.Cherepanov, ”Elastic-Plastic problems”, New York, Asme Press, 1988.

[25] A.Saxena,J.D.Landes,J.L.Bassani, “Non linear Fracture Mechanics: Time-Dipendent Fracture”, Vol. I, ASTP STP 1995.

[26] J.D.Landes,J.A.Begley,G.A.Clarke, “Elastic-Plastic Fracture”, ASTM STP 668.

[27] W.Brochs and I.Scheider, “Numerical Aspects of the Path-Dependence of the J-Integral in Incremental Plasticity – How to calculate reliable J-value in FE analyses”, Internal report, Institute GKSS, October 2001.

[28] J.R.Rice and G.F.Rosengren, “Plane strain deformation near a crack tip in a power-law hardening material”, Journal of Mechanics and Physics Solids, vol.16, pp. 1-12, 1968.

[29] “MSC.Marc Volume A: Theory and User Information”, Version 2001.

[30] “MSC.Marc : User’s Guide”, Version 2001.

[31] C.Timbrell, G.Cook, R.Chandwani, “3D Crack Analysis Using MSC.Marc”, Zentech International Limited, Camberley, http://www.zentech.co.uk.

[32] ASME Boiler and Pressure Vessel Code:

Section III: Nuclear Power Plant Components,

Section XI: Rules for Inservice Inspection of Nuclear Power Plant.

[33] SMC-079, INCONEL® Alloy 690, Special Metals Corporation ed., September 2002

(available on the web site www.specialmetals.com).

183 [34] SMC-046, INCONEL® Alloy 800, Special Metals Corporation ed., September 2002

(available on the web site www.specialmetals.com).

[35] J.C.Newman, I.S.Raju, “An empirical sress-intensity factor equation for the surface crack”, Engineering Fracture Mechanics, vol.15, pp.185-192, 1981.

[36] J.C.Newman, I.S.Raju, “Stress-Intensity Factor for Internal and External Surface Cracks in Cylindrical Vessels”, Journal of Pressure Vessel Technology, vol.104, pp.293-298, November 1982.

[37] T.Fett, “Estimation of stress intensity factors for semi-elliptical surface cracks”, Engineering Fracture Mechanics, vol.66, pp.349-356, 2000.

[38] W.J.Mills and C.M.Brown, “Fracture Toughness of Alloy 690 and EN52 weld in air and water”.

[39] Robert E.Gold, “Basis for selection of Alloy 690 for PWR primary system applications”, Westighouse Electric LLC, April 2003.

[40] G.Ambrogi, “Preliminary Safety Analysis of the IRIS Nuclear Power Plant using RELAP5 Code”, G.Forasassi, F.Oriolo, M.D.Carelli, L.Oriani, -Università di Pisa, DIMNP (tesi di laurea).

[41] D.Grgic, T.Bajs, V.Segon, L.Oriani, F.Berra, “IRIS Base Input Deck and Steady State Qualification for RELAP 5 MOD3.3”, Revision 2.3, 17 February 2003.

[42] NUREG-0800, “Standard Review Plan for the Review of Safety Analysis reports for Nuclear Power Plants”, U.S.Commission, July 1981.

[43] USNRC, “Regulatory Guide 1.60”, December, 1973.

[44] USNRC, “Regulatory Guide 1.61”, October, 1973.