COME CONNETTERE LA MACCHINA AD UNA RETE Wi-Fi
HOW TO CONNECT A MACHINE TO A Wi-Fi NETWORK
COME CONNETTERE LA MACCHINA AD UNA RETE Wi-Fi
Dalla schermata principale premere
sull’icona «MENU»
1. Digitare la Password Tecnico « 2537742 » per poter entrare nel Menù come Tecnico
2. Una volta digitata la password correttamente, premere su «OK» per confermare
1
1. Premere sul cursore come indicato in figura per poter navigare all’interno del Menù Tecnico
2. Al raggiungimento della voce «PASSWORD E INIZIALIZZAZIONI» (parametro 909166), premere su
«OK» per confermare
1
1
1. Premere sul cursore come indicato in figura per poter navigare all’interno del Menù Password e Inizializzazioni.
2. Al raggiungimento della voce « CONFIGURAZIONE RETE
IoT » (parametro 861087), premere su «OK» per confermare e
avviare la procedura.
1. Premere come indicato in figura, per poter aprire il menù di configurazione della macchina ad una rete Wi-Fi.
2. Premere sulla lente di ingrandimento per poter ricercare la rete Wi-Fi alla quale si vuole connettere la macchina.
3. A questo punto la IM11 effettua un scansione delle reti Wi-Fi presenti in zona (solo reti 2.4 GHz!). Individuare quella a cui si desidera connettere la macchina, selezionarla e confermare con il tasto «OK».
1 2
3
4. Digitare la password, rispettando maiuscole, minuscule ed eventuali numeri e/o simboli. Confermare premendo su «OK».
5. Premere su «OK» per poter confermare la configurazione della rete Wi-Fi.
6. Premere su «Wi-Fi» per connettere la macchina alla rete Wi-Fi appena configurata. Attendere che il riquadro in basso a sinistra diventi verde e con la scritta «OK».
4 5
6
RETE A CUI E’ COLLEGATA LA MACCHINA
QUALITA’ DEL SEGNALE DELLA RETE Wi-Fi
STATO DI CONNESSIONE DELLA MACCHINA AL CLOUD
INFO RELATIVE ALLO STATO DELLA RETE
HOW TO CONNECT A MACHINE TO A Wi-Fi NETWORK
From the main screen, press the
“MENU" icon
1. Enter the Technician Password «2537742» to be able to enter the Menu as Technician
2. Once you have entered the password correctly, press on «OK» to confirm
1
1. Press the cursor as shown in the figure to be able to navigate within the Technical Menu
2. Upon reaching the "PASSWORD AND INITIALIZATIONS"
item (parameter 909166), press "OK" to confirm.
1
1
1. Press the cursor as shown in the figure to be able to navigate within the Password and Initializations Menu.
2. Upon reaching the “IoT NETWORK CONFIGURATION" item
(parameter 861087), press "OK" to confirm.
1. Press as shown in the figure, to open the configuration menu of the machine to a Wi-Fi network.
2. Press on the magnifying glass to search for the Wi-Fi network to which you want to connect the machine.
3. At this point the IM11 scans the Wi-Fi networks in the area (2.4 GHz networks only!). Find the one to which you want to connect the machine, select it and confirm by pressing on «OK».
1 2
3
4. Enter the password, respecting upper and lower case letters and any numbers and/or symbols. Confirm by pressing on «OK».
5. Press on «OK» to confirm the configuration of the Wi-Fi network.
6. Press on «Wi-Fi» to connect the machine to the newly configured Wi-Fi network. Wait for the box at the bottom left to turn green and with the word «OK».
4 5
6
NETWORK TO WHICH THE MACHINE IS CONNECTED
QUALITY OF THE SIGNAL OF THE Wi-Fi NETWORK
CONNECTION STATUS OF THE MACHINE TO THE CLOUD
INFORMATION RELATING TO THE STATE OF THE NETWORK
imesa.it