• Non ci sono risultati.

Bibliografia [1] Tsuge Hideki

N/A
N/A
Protected

Academic year: 2021

Condividi "Bibliografia [1] Tsuge Hideki"

Copied!
3
0
0

Testo completo

(1)

Bibliografia

[1] Tsuge Hideki

“Hydroyinamic of bubble formation from submerged orifice”

Department of Applied Chemistry, faculty of Science and Technology Yokohama, Japan. [2] A.K. Chesters

“An analytic solution for the profile and volume of a small drop or bubble symmetrical about a vertical axis”.

Laboratory for Aero-and Hydrodynamics, Delft University of Technology, The Netherland. [3] Andrea Cosentino, Paolo Di Marco, Grassi Walter, Gianluca Memoli.

“Detachment of nitrogen bubble in various fluid and effects of electric field ”

Dipartimento di energetica, Facoltà di ingegneria di Pisa. [4] D. Gerlach, G. Biswas, F. Durst, V. Kolobaric.

“Quasi-static bubble formation on submerged orifices ”,

Department of Mechanical Engineering, Indian Institute of technology, Kampur, India. [5] Andrea Cosentino.

“Effetti del campo elettrico sulla dinamica di bolle di gas in liquidi”

Dipartimento di energetica, Facoltà di ingegneria, Pisa. [6] Autori vari

“The temperature ” vol.28

[7] Prof. Paolo Di Marco.

“Dispense di fisica tecnica ”

Dipartimento di energetica, Facoltà di ingegneria, Pisa. [8] Prof. Paolo Di Marco.

“Dispense di termofluido-dinamica applicata ”

Dipartimento di energetica, Facoltà di ingegneria, Pisa. [9] Prof. Paolo Di Marco, Prof. Walter Grassi.

“Pool boiling in microgravity: assessed results and open issues”

Dipartimento di energetica, Facoltà di ingegneria, Pisa.

[10] H. Wang, X. F. Peng, D. M. Christopher, W. K. Lin, C. Pan.

“Investigation of bubble-top jet flow during subcooled boiling on wires”

Department of thermal engineering, Tsinghua University, Beijing 100084, China. Department of engineering and system science, Tsinghua University, Chinzhu, China.

(2)

[11] Prof. Paolo Di Marco, Prof. Walter Grassi, G. Memoli, T. Takamasa, A. Tomiyama, S. Hosokawa.

“Influence of electric field on single gas-bubble growth and detachment in microgravity”

LOTHAR, Department of Energetics, “L. Poggi”, University of Pisa, Italy

Department of Marine Engineering, Faculty of Marine Science, Tokyo University of Mercantile Marine, Japan

Graduate School of Science and Technology, Kobe University, Japan. [12] T. G. Karayiannis, Y. Xu.

“Electric Field Effect in Boiling Heat Transfer. Part A: Simulation of the Electric Field and Electric Fources”

School of Engineering Systems and Design, South Bank University, London, UK National Refrigeration and Air Conditioning Products, Inc. Brantford, Ont., Canada. [13] P. Di Marco, W. Grassi, A. Faini, G. Memoli.

“Electric field effects on bubbles of nitrogen in FC-72 originating from a flat plane”

LOTHAR, Dipartimento di Energetica “L: Poggi”, Università di Pisa, Italia. [14] G. Memoli

“Comportamento di bolle in condizioni di microgravità”

LOTHAR, Dipartimento di Energetica “L: Poggi”, Università di Pisa, Italia.

(3)

Ringraziamenti

Cogliamo l'occasione per ringraziare tutti coloro che ci hanno permesso di realizzare questo lavoro con i loro consigli, il loro appoggio, la loro compagnia, la loro pazienza e la loro esperienza, in particolare vogliamo ringraziare il Prof. Walter Grassi ed il Prof. Paolo Di Marco per i mezzi messi a disposizione e per le utili discussioni, che hanno permesso di migliorare le nostre conoscenze ingegneristiche, facendoci capire l’importanza del campo scientifico da noi studiato.

Infine vogliamo ringraziare l’Ing. Davide Della Vista per i suoi utili suggerimenti nella fase di programmazione riguardante il sistema di acquisizione dati dell’apparato sperimentale.

Riferimenti

Documenti correlati

Using accelerometers for velocity estimation, no model parameter is needed if we use a kinematic model relating to the position and use the acceleration measurement as input to set up

It is recent news that the “New Guidelines for internal architectures in schools” (Italian Ministerial Decree April 11 th 2013) have been approved, whose inspiration is drawn from

Medical education is considered to be one of most demanding and stressful courses undertaken at tertiary level due to its six year duration and the intense study required

This second methodology was the one preferred and utilized by the Quinto Vicentino municipality, and the result obtained (25% non domestic production and 75% domestic

Development of local approaches for fatigue life prediction of Austempered Ductile Iron-to-Steel dissimilar joints 6.16 S-N curve of full-penetration ground butt-joints

In this work, 316L stainless steel samples made with additive manufactur- ing powder bed fusion technology, have been characterized; focus has been given to laser power and to

This step is similar in many ways to the software engineering step of understanding the problem as well as gathering the user requirements. However, at this stage, the real

In [PSr] cells, most of the Sup35 is converted from a soluble, ac- tive state into an insoluble, inactive state similar to the mammalian prion amyloid.. As with mammalian prions,