Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Tenda A18 v1 o cerca il tuo prodotto tra le migliori offerte di Wireless e Bluetooth
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Tenda A18 v1 o cerca il tuo prodotto tra le migliori offerte di Wireless e Bluetooth
40
0
0
Testo completo
(2)(3)(4)(5)(6)(7)(8)(9)(10)(11)(12)(13)(14)(15)(16)(17)(18)(19)(20)(21)(22)(23)(24)(25)(26)(27)(28)(29)(30)(31)(32)(33)(34)(35)(36)(37)(38)(39)(40)
Documenti correlati
This chapter introduces how to install or uninstall your adapter’s Wi-Fi and Bluetooth drivers, connect to a wireless network, and pair with a Bluetooth device on a Windows
If your router’s MAC filter, wireless access control, or ACL is enabled, the devices connected to the extender cannot get an IP address from the extender and cannot access
Power on the access point, wait until the Power ( ) and Wireless ( ) LEDs are lit and stable, and use the default SSID and Password printed on the label of the access point to
TP-Link is dedicated to improving and richening the product features, giving you a better network experience. We will release the latest firmware at our official website, you can
By default, the Ethernet port of the extender is connected to the 5GHz wireless netwok. Visit http://tplinkrepeater.net, and log in with the password you set for the extender... 2.
Remove TP-Link ID(s) from Managing the Extender. Manage the Extender via the TP-Link Tether App. Check Internet Status. Configure Wireless Network. Change LAN Settings.. Specify
Connect an Ethernet cable from the LAN2 (PoE) Ethernet interface on the AP to the PoE connector on the Ethernet Power Injector.. The table below provides the specifications for
If any of these conditions are met and the access point has not yet joined a controller, you can also configure a DHCP server to return a syslog server IP address to the access
