Bibliografia
[1]...V. Kadambi, J. Abuaf, An analysis of the thermal response of power chip packages, IEEE Transactions on Electron Devices, ISSN 0018-9383, vol. 32, n. 6, pag. 1024-1033, 1985
[2]...C.C. Lee, A.L. Palisoc, J.M.W. Baynham, Thermal analysis of solid-state devices using the boundary element Method, IEEE Transactions on Electron Devices, ISSN 0018-9383, vol. 35, n. 7, pag. 1151-1153, 1988
[3]...C.C. Lee, A.L. Palisoc, Y.J. Min, Thermal analysis of integrated circuit devices and packages, IEEE Transactions on Components, Hybrid, and Manufacturing Technology, ISSN 0148-6411, vol. 12, n. 4, pag. 701-709, 1989 [4]...M. Pesare, A. Giorgio, A.G. Perri, Analytical approach for thermal and electrical design of multilayer structure integrated devices, Electronics Letters, ISSN 0013-5194, vol. 36, n. 13, pag. 1020-1021, 2000
[5]...N. Rinaldi, Thermal analysis of solid-state devices and circuits: an analytical approach, Solid-State Electronics, ISSN 0038-1101, vol. 44, n. 10, pag.
1789-1798, 2001
[6]...P.E. Bagnoli, C. Casarosa, S. di Pascoli, Electro-thermal simulation of hot- spot phenomena in cellular bipolar power transistors: the influence of package thermal resistance, InterPACK '01, Kauai, Hawaii, USA, 2001
[7]...P.E. Bagnoli, F. Stefani, The hot-spot phenomenon and its countemeasures in bipolar power transistors by analytical electro-thermal simulations, IEEE Transactions on Components and Packaging Technology, ISSN 1521-3331, vol. --, n. --, pag. --, 2009
[8]...P.E. Bagnoli, C. Casarosa, F. Stefani, DJOSER: analytical thermal simulator for multilayer electronic structures. Theory and numerical implementation, Thermal Issues in Emerging Technologies ThETA 1, Cairo, Egypt, 2007
[9]...M. N. Ozisik, Heat Conduction, Wiley-Interscience, New York, 1993 [10]...M.L. Krasnov, A.I. Kiselev, G.I. Makarenko, Integral Equations, MIR, Moscow, 1980
[11]...P.E. Bagnoli, C. Bartoli, F. Stefani, Validation of the DJOSER analytical thermal simulator for electronic power devices and assembling structures, Microelectronics Journal, ISSN 0026-2692, vol. 38, n. 2, pag. 185-196, 2007 [12]...P.E. Bagnoli, C. Bartoli, G. Pasquinelli, F. Stefani, DJOSER: verifica teorica e sperimentale dell'accuratezza del simulatore termico stazionario per l’elettronica di potenza, XXIII Congresso Nazionale dell’Unione Termotecnica Italiana UIT, Parma, Italy, 2005
[13]...P.E. Bagnoli, C. Casarosa, M. Montesi, M. Pasquinelli, Steady-state thermal mapping of electronic devices with multi-layer stack mountings by analytical relationships, ASME-ZSIS International Thermal Science Seminar II, vol.1, pag. 413-420, Bled, Slovenia, 2004
[14]... P.E. Bagnoli, C. Casarosa, M. Ciampi, E. Dallago, Thermal Resistance Analysis by Induced Transient (TRAIT) method for power electronic devices thermal characterization. PART I: fundamentals and theory, IEEE Transactions on Power Electronics, ISSN 0885-8993 , vol. PE-13, n. 6, pag. 1208-1219, 1998 [15]... P.E. Bagnoli, C. Casarosa, E. Dallago, M. Nardoni, Thermal Resistance Analysis by Induced Transient (TRAIT) method for power electronic devices thermal characterization. PART II: practice and experiments, IEEE Transactions on Power Electronics, ISSN 0885-8993 , vol. PE-13, n. 6, pag. 1220-1228, 1998 [16]... P.E. Bagnoli, C. Casarosa, S. di Pascoli, Thermal analysis of insulated metal substrates for automotive electronic assemblies, Microelectronics Journal, ISSN 0026-2692 , vol. 30, n. 11, pag. 1129-1135, 1999
[17] F. Stefani, Analisi termiche comparative dei substrati per le applicazioni elettroniche negli autoveicoli, Tesi di Laurea in Ingegneria Elettronica, Università degli Studî di Pisa, 2004
[18]... P.E. Bagnoli, S. di Pascoli, G. Breglio, Study of hot spot phenomena in power transistors by analytical electro-thermal simulation, ESSDERC02 - European Solid-State Device Research Conference, pag. 547-550, Firenze, 2002 [19]... S. Pica, G. Scarpetta, P. Spirito, Electro-thermal simulation and experimental detection of the hot spot onset in power bipolar transistors, Microelectronics Journal, ISSN 0026-2692, vol. 28, n. 3, pag. 263-75, 1997
[20]...P.L. Hower, D.L. Blackburn, F.F. Oettinger, S. Rubin, Stable hot-spots and second breakdown in power transistors, Proceedings of PESC '76 Conference, 1976
[21]...G. Breglio, F. Frisina, A. Magri’, P. Spirito, Electro-thermal instability in low voltage power MOS: Experimental characterization, ISPSD '99 Proceedings, pag. 233-236, Toronto, Canada, 1999
[22]...F. Oettinger, D.L. Blackburn, S. Rubin, Thermal characterization of power transistors, IEEE Transactions on Electron Devices, ISSN 0018-9383 , vol. ed-23, n. 8, pag. 831-838, 1976
[23]...G. Ghione, Dispositivi per la microelettronica, McGraw-Hill, Milano,
1998
[24]...G.B. Gao, M.S. Unlu, H. Morkoc, D.L. Blackburn, Emitter ballasting resistor design for, and current handling capability of AlGaAs/GaAs power heterojunction BJT, IEEE Transactions on Electron Devices, ISSN 0018-9383, vol.
38, n. 2, pag. 185-196, 1991
[25]...P.E. Bagnoli, M. Beccai, F. Stefani, The DJOSER thermal simulator for electronic devices and systems: didactical features for improving reliability culture in academic and industrial environments, ICERI 2008, Madrid, Spain, 2008
[26]...P.E. Bagnoli, S. Luschi, F. Stefani, Study of water speed sensitivity in a multifunctional thick-film sensor by analytical thermal simulations and experiments, Thermal Inverstigations of ICs and Systems - THERMINIC 07, pag.
92-98, Budapest, Hungary, 2007
[27]...W.M. Kays, Convective Heat and Mass Transfer, McGraw-Hill, New York, 1993
[28]...W. Claeys, S. Dilhaire, V. Quintard, J.P Dom, Absolute dynamic measurements of temperature changes in electronic, Proceedings of ETC 93, pag.
378 -384, Rotterdam, Netherlands, 1993
[29]...V. Quintard, S. Dilhaire, T. Phan, W. Claeys, Temperature measurements of metal lines under current stress by high-resolution laser probing, IEEE Transactions on Instrumentation and Measurement, ISSN 0018-9456, vol. 48, n. 1, pag. 69-74, 1999
[30]...P.L. Komarov, M.G. Burzo, P.E. Raad, Thermal Characterization of Pulse-Activated Microelectronic Devices by Thermoreflectance-Based Surface Temperature Scanning, Proceedings of the ASME InterPACK '05, San Francisco, USA, 2005
[31]...S. Grauby, S. Dilhaire, S. Jorez, W. Claeys, Temperature variation mapping of a microelectromechanical system by thermoreflectance imaging, IEEE Electron Device Letters, ISSN 0741-3106, vol. 26, n. 2, pag. 78-80, 2005
[32]...M. Born, E. Wolf, Principles of Optics, Cambridge University Press, Cambridge, 1997
[33]...H. Zimmermann, Silicon Optoelectronic Integrated Circuits, Springer Series in Advanced Microelectronics, 1994
[34]...J. Millman, A. Grabel, P. Terreni, Elettronica di Millman, McGraw-Hill, Milano, 2005
[35]...A.S. Sedra, K.C. Smith, Circuiti per la Microelettronica, Ingegneria 2000, Roma, 1996
[36]...L. Olivieri, E. Ravelli, Elettrotecnica Vol. 1 - Elettrotecnica Generale, Cedam, Padova, 1983
[37]...L. Olivieri, E. Ravelli, Elettrotecnica Vol. 2 - Macchine Elettriche, Cedam, Padova, 1972
[38]...N. Mohan, T.M. Undeland, W.P. Robbins, Power Electronics -
Converters, Applications, and Design, John Wiley and Sons, New York, 1995 [39]...P.E. Bagnoli, E. Franchi, F. Stefani, Dispositivo di regolazione di tensione per generatori a magneti permanenti, Brevetto italiano n. B10/0425
[40]...P.E. Bagnoli, E. Franchi, F. Stefani, AC voltage regulator for permanent magnet generators, Patent Cooperation Treaty (PCT) n. 2009/004466
[41]...A. Longo, Analisi dei Circuiti Elettrici Lineari, Libreria Testi Universitari, Pisa, 1997
[42]...P. Boltzem, R. Scattolini, N. Schiavoni, Fondamenti di Controlli Automatici, McGraw-Hill, Milano, 2008
[43]...G. Marro, Controlli Automatici, Zanichelli, Bologna, 2004
[44]...K.J. Ström, T. Hägglund, PID Controllers: Theory, Design, and Tuning, International Society for Automation (ISA), New York, 1995
[45]...K.J. Ström, T. Hägglund, Advanced PID Control, International Society for Automation (ISA), New York, 2005
[46]...A. Pennatini, Regolatore Serie di Tensione per Generatori a Magneti Permanenti, Tesi di Laurea Specialistica in Ingegneria Elettronica, relatori: P.E.
Bagnoli, E. Franchi, F. Stefani, Università degli Studî di Pisa, 2008
[47]...L. Pieri, Caratterizzazione Sperimentale di un Regolatore Serie per Generatori a Magneti Permanenti, Tesi di Laurea Triennale in Ingegneria Elettronica, relatori: P.E. Bagnoli, G. Basso, F. Stefani, Università degli Studî di Pisa, 2008
[48]...A. Cefalo, Progetto e Realizzazione di un Regolatore Serie per Applicazioni Veicolari prive di Batteria in Tecnologia Digitale, Tesi di Laurea Specialistica in Ingegneria Elettronica, relatori: P.E. Bagnoli, E. Franchi, R.
Roncella, F. Stefani, Università degli Studî di Pisa, 2008 [49]...ATmega8 datasheet, http://www.atmel.com/
[50]...XMEGA A MANUAL datasheet, http://www.atmel.com/
[51]...ATxmega128A1 datasheet, http://www.atmel.com/
[52]...AVR1003: Using the XMEGA Clock System Application Note, http://www.atmel.com/
[53]...AVR1311: Using the XMEGA Timer/Counter Extensions Application Note, http://www.atmel.com/
[54]...AVR1313: Using the XMEGA IO Pins and External Interrupts Application Note, http://www.atmel.com/
[55]...AVR1900: Getting started with ATxmega128A1 on STK600 Application Note, http://www.atmel.com/
[56]...AVR1307: Using the XMEGA USART Application Note, http://www.atmel.com/
[57]...AVR1300: Using the XMEGA ADC Application Note, http://www.atmel.com/
[58]...AVR1302: Using the XMEGA Analog Comparator Application Note,
http://www.atmel.com/
[59]...AVR600: STK600 Expansion, routing and socket Boards Application Note, http://www.atmel.com/
[60]...AVR1305: XMEGA Interrupts and the Programmable Multi-level Interrupt Controller Application Note, http://www.atmel.com/
[61]...AVR1000: Getting Started Writing C-code for XMEGA Application Note, http://www.atmel.com/
[62]...AVRSTK500 User Guide, http://www.atmel.com/
[63]...AVRSTK600 User Guide, http://www.atmel.com/
[64]...AVR1900: Getting started with ATxmega128A1 Application Note, http://
www.atmel.com/