Appendice C – Parametri di default dello strumento Agilent 33220A
Appendice C
Parametri di default dello strumento Agilent 33220A
C - 1
Output Configuration
Factory Setting
Function Frequency Amplitude / Offset Output Units Output Termination Autorange Sine wave 1 kHz 100 mVpp / 0.000 Vdc Vpp 50 Ω On
Modulation
Factory Setting
Carrier (AM, FM, PM, FSK) Carrier (PWM)
Mod. Waveform (AM)
Mod. Waveform (FM, PM, PWM) AM Depth FM Deviation PM Deviation FSK Hop Frequency FSK Rate PWM Width Deviation Modulation State 1 kHz Sine wave 1 kHz Pulse 100 Hz Sine wave 10 Hz Sine wave 100% 100 Hz 180 degrees 100 Hz 10 Hz 10 μs Off
Sweep
Factory Setting
Start / Stop Frequency Sweep Time Sweep Mode Sweep State 100 Hz / 1 kHz 1 Second Linear Off
Burst
Factory Setting
Burst Count Burst Period Burst Start Phase Burst State
1 Cycle 10 ms 0 degrees Off
System-Related Operations
Factory Setting
Power-Down Recall Display Mode Error Queue
Stored States, Stored Arbs Output State
Disabled On
Errors are Cleared No Change Off
Triggering Operations
Factory Setting
Trigger Source Internal (Immediate)
Remote Interface Configuration
Factory Setting
• GPIB Address • DHCP • Auto IP • IP Address • Subnet Mask • Default Gateway • DNS Server • Host Name • Domain Name • 10 • On • On • 169.254.2.20 • 255.255.0.0 • 0.0.0.0 • 0.0.0.0 • none • none