Style Number
US Style
WLB No.
British Standard
PRODUCT SPECIFICATION
Finish/Designation
Specification
MIL-Y-1140H
MIL-C-9084
DIN 65066
BS 3396
Specification
Tolerance
Weave pattern
DIN ISO 9354
Area weight
± 5%
DIN EN 12127
Yarn
DIN EN 12654
91111
120
8.4544.60
S 13 / 11
FK600
four shaft satin
105,0
EC5-11x2
warp yarn
weft yarn
EC5-11x2
Fibre count
warp ends
weft picks
23,7
22,5
± 5%
± 5%
DIN EN 1049
Temperature resistance 1)
Continuous load
Short time resistance
°C
°C
260
600
Moisture content
Finish content
0,2
%
%
± 1%
± 5%
DIN EN 3616
DIN ISO 1887
DIN EN 60
Thickness (approx. dry)
in laminate
mm
mm
± 5%
± 5%
DIN ISO 4603/E
0,14
0,10
(43% Vol.)
g / m²
1 / cm
<
GLASS FILAMENT FABRICS for PLASTICS REINFORCEMENT
III
Unit
-0,08
0,28
tex
All statements herein are expressions of opinion which we believe to be accurate and reliable, but are presented without guarantee or responsibility on our part. Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent. No patent warranty of any kind, express or implied, is made or intended.
INTERGLAS Technologies AG, Benzstraße 14, D-89155 Erbach, Telefon +49 (0)7305 / 955-416, Fax +49 (0)7305 / 955-512
Page 1 of 2 TS / 07.11.02
GLASS FILAMENT FABRICS for PLASTICS REINFORCEMENT
PRODUCT SPECIFICATION
Specification
DIN EN 2747
DIN 53454
DIN EN 2377
DIN EN 2746
DIN 65380
DIN prEN 2580
Style Number
91111
Standard
CS-ITG
Tensile strength
warp
weft
Young's-Modulus
warp
weft
335
320
19
18
MPa
MPa
GPa
GPa
Compression strength
warp
weft
Compression-Modulus
warp
weft
MPa
MPa
GPa
GPa
Interlaminar shear strength
warp
weft
MPa
MPa
Flexural strength
warp
weft
Flexural-Modulus
warp
weft
MPa
MPa
GPa
GPa
355
340
50
45
495
460
24
24
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
± 10%
Unit
Tolerance
1) Temperature resistance for dry fabrics
Remarks
/ FK600
All statements herein are expressions of opinion which we believe to be accurate and reliable, but are presented without guarantee or responsibility on our part. Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent. No patent warranty of any kind, express or implied, is made or intended.
INTERGLAS Technologies AG, Benzstraße 14, D-89155 Erbach, Telefon +49 (0)7305 / 955-416, Fax +49 (0)7305 / 955-512
Page 2 of 2 TS / 07.11.02
