BIBLIOGRAFIA
1. E.P. Giannelis, R. Krishnamoorti, E. Manias, “Polymer-silicate nanocomposites: model systems for confined polymers and polymer brushes”,
Adv. Pol. Sci., Vol. 138, 1998, pp.107-147.
2. M. Alexandre, P. Dubois, “Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials”, Mat. Sci. and
Eng., Vol. 28, 2000, pp.1-63.
3. E. Hackett, E.P. Giannelis, E. Manias, “Molecular dynamics simulation of organically modified layered silicates”, J. Chem. Phys., Vol. 108, 1998, pp.7410-7415.
4. D.R. Paul, Q.H. Zeng, “The interlayer swelling and molecular packing in organoclays”, J. Coll. Inter. Sci., Vol. 292, 2005, pp. 462-468.
5. S.S. Ray, M. Okamoto, “Polymer/layered silicate nanocomposites: a review from preparation to processing”, Prog. Polym. Sci., Vol. 28, 2003, pp.1539-1641.
6. M. Biswas, S.S. Ray, “Recent progress in synthesis and evaluation of polymer-montmorillonite nanocomposites”, Adv. Pol. Sci., Vol. 155, 2001, pp.167-221. 7. R.A. Vaia, H. Ishii, E.P. Giannelis, “Synthesis and properties of
two-dimensional nanostructures by direct intercalation of polymer melts in layered silicates”, Chem. Mater., Vol. 5, 1993, pp.1694-1696.
8. P. Maiti, P.H. Nam, M. Okamoto, T. Kotaka, N. Hasegawa, A. Usuki, “The effect of crystallization on the structure and morphology of polypropylene/clay nanocomposites”, Polym. Eng. Sci., Vol. 42, 2002, pp. 1864-1871.
9. P. Maiti, P.H. Nam, M. Okamoto, N. Hasegawa, A. Usuki, “Influence of crystallization on intercalation, morphology and mechanical properties of polypropylene/clay nanocomposites”, Macromolecules, Vol. 35, 2002, pp.2042-2049.
10. N.G. Gaylord, “Compatibilization of hydroxyl-containing fillers and thermoplastic polymers”, US Pat. N° 3,956,230, 1976.
11. N.G. Gaylord, “Compatibilization of hydroxyl-containing fillers and thermoplastic polymers”, US Pat. N° 4,071,494, 1978.
12. N.G. Gaylord, A. Takahashi, “Masterbatched polyethylene-clay composites prepared through in situ graft copolymerization of maleic anhydride”, Polym.
Sci. Techn., Vol. 21, 1983, pp.183-190.
13. K.H. Wang, M.H. Choi, C.M. Koo, Y.S. Choi, I.J. Chung, “Synthesis and characterazation of maleated polyethylene/clay nanocomposites”, Polymer, Vol. 42, 2001, pp.9819-9826.
14. S. Hotta, D.R. Paul, “Nanocomposites formed from linear low density polyethylene and organoclays”, Polymer, Vol. 45, 2004, pp.7639-7654.
15. H. Zhai, W. Xu, H. Guo, Z. Zhou, S. Shen, Q. Song, “Preparation and characterization of PE and PE-g-MAH/montmorillonite nanocomposites.”, Eur.
Polym. J., Vol. 40, 2004, pp.2539-2545.
16. H.G. Jeon, H.T. Jung, S.W. Lee, S.D. Hudson, “Morphology of polymer/silicate nanocomposites”, Polym. Bull., Vol. 41, 1998, pp.107-113.
17. M. Mainil, M. Alexandre, F. Monteverde, P. Dubois, “Polyethylene organo-clay nanocomposites: the role of the interface chemistry on the extent of clay intercalation/xfoliation”, J. Nanosci. Nanotech., Vol. 6, 2006, pp.337-344.
18. L. Qiu, W. Chen, B. Qu, “Morphology and thermal stabilization mechanism of LLDPE/MMT and LLDPE/LDH nanocomposites”, Polymer, Vol. 47, 2006,
pp.922-930.
19. J.S. Bergman, H. Chen, E.P. Giannelis, M.G. Thomas, G.W. Coates, “Synthesis and characterization of polyolefin-silicate nanocomposites: a catalyst intercalation and in situ polymerization approach”, Chem. Commun., Vol. 21, 1999, pp.2179-2180.
20. J. Heinemann, P. Reichert, R. Thomann, R. Mülhaupt, “Polyolefin nanocomposites formed by melt compounding and transition metal catalyzed ethene homo- and copolymerization in the presence of layered silicates”,
Macromol. Rapid. Commun., Vol. 20, 1999, pp.423-430.
21. Y.H. Jin, H.J. Park, S.S. Im, S.Y. Kwak, S. Kwak, “Polyethylene/clay nanocomposite by in-situ exfoliation of montmorillonite during Ziegler-Natta polymerization of ethylene”, Macromol. Rapid. Commun., Vol. 23, 2002, pp.135-140.
22. M. Alexandre, P. Dubois, T. Sun, J.M. Garces, R. Jerome, “Polyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique: synthesis and mechanical properties”, Polymer, Vol. 43, 2002, pp.2123-2132.
23. S.W. Kuo, W.J. Huang, S.B. Huang, H.C. Kao, F.C. Chang, “Syntheses and characterizations of in situ blended metallocence polyethylene/clay nanocomposites”, Polymer, Vol. 44, 2003, pp.7709-7719.
24. J.-T. Xu, Q. Wang, Z.-Q. Fan, “Non-isothermal crystallization kinetics of exfoliated and intercalated polyethylene/montmorillonite nanocomposites prepared by in situ polymerization”, Eur. Polym. J., Vol. 41, 2005, pp.3011-3017.
25. S. Wang, Y. Hu, Q. Zhongkai, Z. Wang, Z. Chen, W. Fan, “Preparation and flammability properties of polyethylene/clay nanocomposites by melt intercalation method from Na+ montmorillonite”, Mater. Lett., Vol. 57, 2003,
pp.2675-2678.
26. M. Alexandre, G. Beyer, C. Henrist, R. Cloots, A. Rulmont, R. Jérome, P. Dubois, “One-pot preparation of polymer/clay nanocomposites starting from Na+ monmorillonite. 1. Melt intercalation of ethylene-vinyl acetate copolymer”,
Chem. Mater., Vol. 13, 2001, pp.3830-3832.
27. J. Zhang, C.A. Wilkie, “Preparation and flammability properties of polyethylene–clay nanocomposites”, Polym. Degrad. Stab., Vol. 80, 2003, pp.163-169.
28. X. Zheng, C.A. Wilkie, “Nanocomposites based on poly(ε-caprolactone)(PCL)/clay hybrid: polystyrene,high impact polystyrene, ABS, polypropylene and polyethylene”, Polym. Degrad. Stab., Vol. 82, 2003, pp.441-450.
29. S. Su, D.D. Jiang, C.A.Wilkie, “Poly(methyl methacrylate), polypropylene and polyethylene nanocomposite formation by melt blending using novel polymerically-modified clays”, Polym. Degrad. Stab., Vol. 83, 2004, pp.321-331.
30. S. Su, D.D. Jiang, C. A.Wilkie, “Novel polymerically-modified clays permit the preparation of intercalated and exfoliated nanocomposites of styrene and ist copolymers by melt blending”, Polym. Degrad. Stab., Vol. 83, 2004, pp.333-346.
31. S. Su, D.D. Jiang, C.A.Wilkie, “Study on the thermal stability of polystyril surfactants and their modified clay nanocomposites”, Polym. Degrad. Stab., Vol. 84, 2004, pp.269-277.
32. S. Su, D.D. Jiang, C.A.Wilkie, “Polybutadiene-modified clay and its nanocomposites”, Polym. Degrad. Stab., Vol. 84, 2004, pp. 279-288.
33. S. Su, C.A. Wilkie, “The thermal degradation of nanocomposites that contain an oligomeric ammonium cation on the clay”, Polym. Degrad. Stab., Vol. 83, 2004, pp.347-362.
34. J. Zhang, D.D. Jiang, C.A. Wilkie, “Thermal and flame properties of polyethylene and polypropylene nanocomposites based on an oligomerically-modified clay”, Polym. Degrad. Stab., Vol. 91, 2006, pp.298-304.
35. C. Zhao, M. Feng, F. Gong, H. Qin, M. Yang, “Preparation and characterization of polyethylene-clay nanocomposites by using chlorosilane-modified clay”, J. Appl. Polym. Sci., Vol. 93, 2004, pp.676-680.
36. C. Zhao, H. Qin, F. Gong, M. Feng, S. Zhang, M. Yang, “Mechanical, thermal and flammability properties of polyethylene/clay nanocomposites”, Polym.
Degr. Stab., Vol. 87, 2005, pp.183-189.
37. D. Chaiko, A.A. Leyva, “Thermal Transitions and Barrier Properties of Olefinic Nanocomposites”, Chem. Mater., Vol. 17, 2005, pp.13-19.
38. S. Duquesne, C. Jama, M. Le Bras, R. Delobel, P. Recourt, J.M. Gloaguen, “Elaboration of EVA-nanoclay systems-characterization, thermal behaviour and fire performance”, Comp. Sci. Technol., Vol. 63, 2003, pp.1141-1148. 39. M. Alexandre, G. Beyer, C. Henrist, R. Cloots, A. Rulmont, R. Jérome, Ph.
Dubois, “Preparation and properties of layered silicate nanocomposites based on ethylene vinyl acetate copolymers”, Macromol. Rapid Commun., Vol. 22, 2001, pp.643-646.
40. A. Riva, M. Zanetti, M. Braglia, G. Camino, L. Falqui, “Thermal degradation and rheological behaviour of EVA/montmorillonite nanocomposites”, Polym.
Degrad. Stab., Vol. 77, 2002, pp.299-304.
41. M. Zanetti, L. Costa, “Preparation and combustion behaviour of polymer/layered silicate nanocomposites based upon PE and EVA”, Polymer, Vol. 45, 2004, pp.4367-4373.
42. T.H. Chuang, W. Guo, K.C. Cheng, S.W. Chen, H.T. Wang, Y.Y. Yen, “Thermal properties and flammability of ethylene-vinyl acetate copolymer/montmorillonite/polyethylene nanocomposite with flame retardants”
J. Polym. Res., Vol. 11, 2004, pp.169-174.
43. J.W. Huang, C.C. Kang, T.H. Chen, “Isothermal crystallization of poly(ethylene-co-glycidyl mathacrylate)/clay nanocomposites”, J. Appl. Polym.
Sci., Vol. 97, 2005, pp.1051-1064.
44. N. Hasegawa, H. Okamoto, M. Kawasumi, M. Kato, A. Tsukigase, A. Usuki, “Polyolefin-clay hybrids based on modified polyolefins and organophilic clay”,
Macromol. Mater. Eng., Vol. 280/281, 2000, pp.76-79.
45. C.M. Koo, H.T. Ham, S.O. Kim, K.H. Wang, I.J. Chung, D.-C. Kim, W.-C. Zin, “Morphology evolution and anisotropic phase formation of the maleated polyethylene-layered silicate nanocomposites”, Macromolecules, Vol. 35, 2002, pp.5116-5122.
46. K.H. Wang, I.J. Chung, M.C. Jang, J.K. Keum, H.H. Song, “Deformation behavior of polyethylene/silicate nanocomposites as studied by real-time wide angle X-ray scattering”, Macromolecules, Vol. 35, 2002, pp.5529-5535.
47. T.G. Gopakumar, J.A. Lee, M. Kontopoulou, J.S. Parent, “Influence of clay exfoliation on the physical properties of montmorillonite/polyethylene composites”, Polymer, Vol. 43, 2002, pp.5483-5491.
48. M. Kato, H. Okamoto, N. Hasegawa, A. Tsukigase, A. Usuki, “Preparation and properties of polyethylene-clay hybrids”, Polym. Eng. Sci., Vol. 43, 2003, pp.1312-1316.
49. J.A. Lee, M. Kontopoulou, J.S. Parent, “Time and shear dependent rheology of maleated polyethylene and its nanocomposites”, Polymer, Vol. 45, 2004, pp.6595-6600.
50. G. Liang, J. Xu, S. Bao, W. Xu, “Polyethylene/maleic anhydride grafted polyethylene/organic-montmorillonite nanocomposites. I. preparation, microstructure, and mechanical properties”, J. Appl. Polym. Sci., Vol. 91, 2004, pp.3974-3980.
51. A. Bafna, G. Beaucage, F. Mirabella, S. Mehta, “3D Hierarchical orientation in polymer-clay nanocomposite films”, Polymer, Vol. 44, 2003, pp. 1103-1115. 52. C.M.L. Preston, G. Amarasinghe, J.L. Hopewell, R.A. Shanks, Z. Mathys,
“Evaluation of polar ethylene copolymers as fire retardant nanocomposites matrices”, Polym. Degr. Stab., Vol. 84, 2004, pp.533-544.
53. J. Morawiec, A. Pawlak, M. Slouf, A. Galeski, E. Piorkowska, N. Krasnikova, “Preparation and properties of compatibilized LDPE/organo-modified montmorillonite nanocomposites”, Eur. Polym. J., Vol. 41, 2005, pp.1115-1122.
54. R.K. Shah, D.L. Hunter, D.R. Paul, “Nanocomposites from poly(ethylene-co-methacrylic acid) ionomers: effect of surfactant structure on morphology and properties”, Polymer, Vol. 46, 2005, pp.2646-2662.
55. Y. Xu, Z. Fang, L. Tong, “On promoting intercalation and exfoliation of bentonite in high-density polyethylene by grafting acrylic acid”, J. Appl. Polym. Sci., Vol.96, 2005, pp.2429-2434.
56. K. Chrissopoulou, I. Altintzi, S.H. Anastasiadis, E.P. Giannelis, M. Pitsikalis, N. Hadjichristidis, N. Theophilou, “Controlling the miscibility of polyethylene/layered silicate nanocomposites by altering the polymer/surface interactions” , Polymer, Vol. 46, 2005, pp.12440-12451.
57. M. Gelfer, H.H. Song, L. Liu, C. Avila-Orta, L. Yang, M. Si, B.S. Hsiao, B. Chu, M. Rafailovich, A.H. Tsou, “Manipulating the Microstructure and Rheology in Polymer-Organoclay Composites”, Polym. Eng. Sci., Vol. 42, 2002, pp.1841-1851.
58. K.H. Wang, C.M. Koo, I.J. Chung, “Physical properties of polyethylene/silicate nanocomposite blown films”, J. Appl. Polym. Sci., Vol. 89, 2003, pp.2131-2136.
59. K.D. Min, M.Y. Kim, K.Y. Choi, J.H. Lee, S.G. Lee, “Effect of layered silicates on the crystallinity and mechanical properties of HDPE/MMT nanocomposite blown films”, Polym. Bull., Vol. 57, 2006, pp.101-108.
60. R.K.Shah, R.K. Krishnaswamy, S. Takahashi, D.R. Paul, “Blown films of nanocomposites prepared from low density polyethylene and a sodium ionomer of poly(ethylene-co-methacrylic acid)”, Polymer, Vol. 47, 2006, pp.6187-6201.
61. F.P. La Mantia, N.T. Dintcheva, G. Filippone, D. Acierno, “Structure and dynamics of polyethylene/clay films”, J. Appl. Polym. Sci., Vol. 102, 2006, pp.4749-4758.
62. F.P. La Mantia, N.T. Dintcheva, V. Malatesta, F. Pagani, “Improvement of photo-stability of LLDPE-based nanocomposites”, Polym. Degr. Stab., Vol. 91, 2006, pp.3208-3213.
63. S. Morlat-Therias, B. Mailhot, J.L. Gardette, C. Da Silva, B. Haidar, A. Vidal, “Photooxidation of ethylene-propylene-diene/montmorillonite nanocomposites”,
Polym. Degr. Stab., Vol. 90, 2005, pp.78-85.
64. H. Qin, Z. Zhang, M. Feng, F. Gong, S. Zhang, M.Yang, “Improvement of photo-stability of LLDPE-based nanocomposites”, J. Polym. Sci. Part B:
Polym. Phys., Vol. 42, 2004, pp.3006-3012.
65. P.H Geil, Polymer single crystals, Interscience, 1968
66. C. Marazzato, S. Filippi, P. Magagnini, Y. Peneva, N. Tzankova Dintcheva, F.P. La Mantia, “Nanocompositi da polietileni e copolimeri PE-g-MA con diversa struttura molecolare”, XVII Convegno Italiano di Scienza e Tecnologia delle Macromolecole, Napoli, Settembre 2005, pp.118-119
67. A. Famulari, P. Arosio, S.V. Meille, S. Filippi, C. Marazzato, P. Magagnini, “Effetti di mutua orientazione in nanocompositi PE-g-MA/argilla compatibilizzata” XVII Convegno Italiano di Scienza e Tecnologia delle Macromolecole, Napoli, Settembre 2005, pp.120-121
68. A. Famulari, P. Arosio, S. Filippi, C. Marazzato, P. Magagnini, L. Minkova, S.V. Meille, “Clay-induced preferred orientation in polyethylene/compatibilized clay nanocomposites”, J. Macromol. Sci. Part B: Phys., Vol. 46 , 2007, pp. 355-371 69. A. Famulari, P. Arosio, S.V. Meille, S. Filippi, C. Marazzato, P. Magagnini,
“Structure and morphology of polymer/clay nanocomposites: the contribution of X-ray diffraction”, XVIII Convegno Italiano di Scienza e Tecnologia delle Macromolecole, Catania, Settembre 2007, pp.215-216
70. C. Marazzato, Y. Peneva, E. Lefterova, S. Filippi, L. Minkova, “Kinetics of non-isothermal degradation of nanocomposites based on functionalized polyethylenes” Polymer Testing, Vol. 26, 2007, pp.526-536
71. P. Magagnini, S. Filippi, C. Marazzato, F.P. La Mantia, L. Minkova, “Morphology of nanocomposites from ethylenacrylic acid copolymers”,
e-Polymers, N° 086, 2005, pp.1-11
72. S. Filippi, C. Marazzato, P. Magagnini, N. Tzankova Dintcheva, F.P. La Mantia, “Nanocomposites from poly(ethylene-co-acrylic acid) copolymers and a Zn-ionomer”, XVII Convegno Italiano di Scienza e Tecnologia delle Macromolecole, Napoli, Settembre 2005, pp.124-125
73. S. Filippi, C. Marazzato, P. Magagnini, L. Minkova, N.T. Dintcheva, F.P. La Mantia, “Organoclay nanocomposites from ethylene-acrylic acid copolymers”,
Macromol. Mat. Eng., Vol. 291, 2006, pp.1208-1225
74. Y. Peneva, L. Minkova, “Non-isothermal and isothermal crystallization of nanocomposites based on functionalized polyethylenes”, Polym. Test., Vol.25, 2006, pp.366-376.
75. S. Filippi, C. Marazzato, P. Magagnini, L. Conzatti, G. Costa, N. Tzankova Dintcheva, F.P. La Mantia; “Compatibilization of HDPE/organoclay nanocomposites by functionalized polyethylenes”, VIII Convegno Nazionale AIMAT, Palermo, Giugno 2006
76. Z. Bartczak, A.S. Argon, R.E. Cohen, T. Kowalewski, “The morphology and orientation of polyethylene in films of sub-micron thickness crystallized in contact with calcite and rubber substrates”, Polymer, Vol. 40, 1999, pp.2367-2380.
77. Z. Bartczak, A.S. Argon, R.E. Cohen, M. Weinberg, “Toughness mechanism in semi-crystalline polymer blends: I. High-density polyethylene toughened with rubbers”, Polymer, Vol. 40, 1999, pp.2331-2346
78. S. Filippi, E. Mameli, C. Marazzato, P. Magagnini, “Comparison of solution-blending and melt-intercalation for the preparation of poly(ethylene-co-acrylic acid) organoclay nanocomposites”, Eur. Polym. J., Vol.43 , 2007, pp.1645-1659.
79. S. Filippi, C. Marazzato, P. Magagnini, A. Famulari, P. Arosio, S.V. Meille, “Structure and morphology of HDPE-g-MA/organoclay nanocomposites: Effects of the preparation procedures”, Eur. Polym. J., in stampa.
80. P.J. Yoon, D.L. Hunter, D.R. Paul, “Polycarbonate nanocomposites. Part1. Effect of organoclay structure on morphology and properties”, Polymer, Vol. 44, 2003, pp.5323-5339
81. D. Dharaiya, S.C. Jana, “Thermal decomposition of alkyl ammonium ions and its effect on surface polarity of organically treated nanoclay”, Polymer, Vol. 46, 2005, pp.10139-10147
82. A. Tidjani, O. Wald, M.M. Pohl, M.P. Hentsche, B. Schartel, “Polypropylene-graft-maleic anhydride-nanocomposites: I – Characterization and thermal stability of nanocomposites produced under nitrogen and in air” Polym. Degr.
