• Non ci sono risultati.

RECENT RESEARCHES in INFORMATION SCIENCE and APPLICATIONS

N/A
N/A
Protected

Academic year: 2022

Condividi "RECENT RESEARCHES in INFORMATION SCIENCE and APPLICATIONS"

Copied!
15
0
0

Testo completo

(1)
(2)

RECENT RESEARCHES in INFORMATION SCIENCE and

APPLICATIONS

Proceedings of the 7th WSEAS International Conference on Computer Engineering and Applications (CEA '13)

Proceedings of the 1st International Conference on Computer Generated Design (CGD '13)

Proceedings of the 1st International Conference on Computer Generated Imagery (CGI '13)

Milan, Italy January 9-11, 2013

Scientific Sponsor:

University of Naples Federico II, Italy

Recent Advances in Computer Engineering Series | 9

ISSN: 1790-5109 Published by WSEAS Press

ISBN: 978-1-61804-150-0

HTUwww.wseas.orgUT

(3)

RECENT RESEARCHES in

INFORMATION SCIENCE and APPLICATIONS

Proceedings of the 7th WSEAS International Conference on Computer Engineering and Applications (CEA '13)

Proceedings of the 1st International Conference on Computer Generated Design (CGD '13)

Proceedings of the 1st International Conference on Computer Generated Imagery (CGI '13)

Milan, Italy

January 9-11, 2013

Published by WSEAS Press

www.wseas.org

Copyright © 2013, by WSEAS Press

All the copyright of the present book belongs to the World Scientific and Engineering Academy and Society Press. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the Editor of World Scientific and Engineering Academy and Society Press.

All papers of the present volume were peer reviewed by no less that two independent reviewers.

Acceptance was granted when both reviewers' recommendations were positive.

See also: http://www.worldses.org/review/index.html

ISSN: 1790-5109

ISBN: 978-1-61804-150-0

North Atlantic University Union World Scientific and Engineering Academy and Society

(4)

RECENT RESEARCHES in INFORMATION SCIENCE and

APPLICATIONS

Proceedings of the 7th WSEAS International Conference on Computer Engineering and Applications (CEA '13)

Proceedings of the 1st International Conference on Computer Generated Design (CGD '13)

Proceedings of the 1st International Conference on Computer Generated Imagery (CGI '13)

Milan, Italy

January 9-11, 2013

(5)
(6)

Editors:

Prof. Ottavia Corbi, University of Naples Federico II, Italy.

Prof. José Carlos Metrôlho, Instituto Politécnico de Castelo Branco, Portugal.

Prof. Albert Lysko, Council for Scientific and Industrial Research, South Africa.

Prof. Rocco Furferi, Università degli Studi di Firenze, Italy.

Scientific Committee-Reviewers:

Carlos Gonzalez Kevin Kam Fung Yuen Satish Kumar Duraiswamy Hammad Ahmad

Miao Wang Elena Scutelnicu Muhammet Koksal Jyoti Mahajan

Alejandro Fuentes-Penna K. K. Mishra

Santoso Wibowo Maulahikmah Galinium Ljubomir Lazic

M. M. Noor Harjit Pal Singh Rocco Furferi Takuya Yamano Nikhil Raj Yu Zhang Agoujil Said Marius Marcu Sorin Ioan Deaconu Mihai Timis Champion Wijaya Arianit Maraj Yi-Chao Wu Perumal Pitchandi Sergio Lopes Aamir Saeed Malik Chenwen Zheng Roumiana Kountcheva Md. Shamim Akhter Sumanth Yenduri Waqas Bangyal Prashant Kumar

Claudia-Georgeta Carstea Chandrasekaran Manoharan Valeriy Perminov

Nikos Loukeris Sorinel Oprisan

Wan Hussain Wan Ishak Ehsan Kamrani

Tsvetelina Draganova Vipin Balyan

Edy Portmann

Hassan Chizari Chizari Constantino Martins Hamed Ziaeipoor Hanmin Jung Mohamed Zahran Farhad Mehran

Chunwei, Lu Wini Lu Konstantin Volkov Miroslav Voznak Saeed Saqib

George Mavrommatis Guoxiang Liu

Cornelia Gyorodi Muhammad Zakarya Tiberiu Socaciu Daniela Litan David Nicoleta

Snezhana Georgieva Gocheva-Ilieva Amjad Mahmood

Chandrasekaran Subramaniam Lesley Farmer

Mohammad Firoj Mithani Narendra Singh Yadav Anel Tanovic

Hime Aguiar Zengshi Chen Faraneh Zarafshan Al Emran Ismail Payam Porkar Valeriu Prepelita Matteo Palai Kovářík Martin Gabriela Mircea Gabriel Badescu Hongjun Liu Priyadarshan Dhabe Sawtantar Singh Khurmi Ismail Rakip Karas Dana Anderson Hung-Jen Yang Menaka Sivakumar Emmanuel Lopez-Neri Andreea Zamfir Silvy Huang

Alina Adriana Minea Kandarpa Kumar Sarma Mahdi Faraji

Jiri Hrebicek Petr Hajek

Panagiotis Gioannis Huashui Zhan

Mohd Helmy Abd Wahab Saad Alharbi

Diego Pinto Roa Aw Yoke Cheng

Eleazar Jimenez Serrano Balakrishnan Venkatalakshmi

(7)
(8)

Table of Contents

Plenary Lecture 1: Approaches to Engineer Interactions between Distributed Components 11 Giacomo Cabri

Plenary Lecture 2: Shape Memory Alloys: Mechanical Behaviour Modelling, Design Issues, Smart Devices and Numerical Implementation for Structural Control Applications

12 Ottavia Corbi

Plenary Lecture 3: On the Mechanics of Masonry Vaults: Theoretical and Technical Approaches 13 Alessandro Baratta

Advanced Elementary Symmetric Polynomials Calculation Algorithm 15 Jerzy S. Respondek

A Hybrid Algorithm Scheduling Flexible Manufacturing System Consideration Cost Maintenance

19 Aziz Norozi Nodhi, Farzin Rajabi Divrazm, Toktam Golkhayli, Hassan Falahnzhad Nodhi, Seyd

Mostafa Rezai

Combination-Based Solution for Timetable Organizer 24

Sopha Nem, Rozana Kasbon, Foong Oi Mean, Saipunidzam Mahamad

Multimedia Data Hiding Evaluation Metrics 29

Alaa A. Jabbar Al-Taay, Shahrin Bin Sahib, Mazdak Zamani

Modeling and Analysis of the Electric Field and Potential Distribution in a Wire-Cylinder Air Gap

35 Konstantinos N. Kiousis, Antonios X. Moronis

Design Optimization for Nonlinear Dynamic Response of the Electromechanical Actuator 41 Seok-Heum Baek, Hui-Eun Bae, Sangmo Kang, Chan-Woo Ahn, Hyun-Su Kim

A Stepwise Evolution of Functions 48

Nor Zainah Siau, Christopher J. Hinde, Roger G. Stone

Design of the Electro-Hydrostatic Actuator with RBF Neural Network 54 Jeongju Choi, Heung-Sik Park, Chan-Woo Ahn

OpenFlow-Based Routing Mechanism for Call Session State Migration in the IMS 60 Manabu Ito, Satoshi Komorita, Yoshinori Kitatsuji, Hidetoshi Yokota

Performance Evaluation of Vane Motor Driven by Liquefied Hydrogen Peroxide 68 Deuk-Eui Hong, Ga-Ram Ryu, Seung-Ho Han

A Study on The Optimization of Heat Sink's Heat Performance about Tip Clearance and Shape 74 Eon Chan Jeon, Gi Ho Yoon, Se Min Kim, Jung Do Jeon

Distributed Computing Framework for Applying Simulation Optimization Algorithm Using Web Services

77 Taejong Yoo, Enver Yücesan

Recent Researches in Information Science and Applications

ISBN: 978-1-61804-150-0 7

(9)

Data Processing Using Python Script and ArcGIS ModelBuilder 82 Pil Kwon

Advanced Architecture of Spatial Data Infrastructure in Republic of Korea 86 Gonil Rho, Kiyun Yu

Protocol Simulation Software for 4th Generation Wireless Networks 90 Eugenijus Kačerginskis, Lina Narbutaitė

Improvement of Personalized e-Learning Model Framework Using Principles of Knowledge Management

97 Sarma Cakula, Maija Sedleniece

Event Detection using Geo-tagged Contents of Microblog 103

Hwamin Son, Jaeeun Lee, Gonil Rho, Saerim Cho, Kiyun Yu

A Study on the Melting Phenomena of Level Sender and Urea-Water for SCR System 108 Joon-Ho Lee, Rock-Won Jeon, Si-Pom Kim, Jae-Hun Lee, Jae-Hoon Lee

Study on the Flange Manufacturing of Stainless Steel Pipes Using Orbital Forming 114 SeungGul Baek , JinWoo Jang, JoonHong Park, YoungChul Park

Human Mobility Model Establishment with Hidden Markov Model 119 Seung Ho Ryu, Ha Yoon Song

Parallel Processing Methods on Color Segmentation 125

Sang Gu Lee

Node Mobility Model for Opportunistic Networks Based on Gaussian Markov Random Fields and Underlying Hidden Markov Chain

130 Ladislava Smítková Janků, Kateřina Hyniová

Security Investment Analysis with Information Threats: A Stochastic Approach 136 Won Seok Yang, Tae-Sung Kim

Optimal Operation of Information Security Systems: An Application of Anti-Virus 140 Won Seok Yang, Tae-Sung Kim

Formal Representations of Bulgarian Possessive and Reflexive-Possessive Pronouns 144 Velislava Stoykova

Modeling of Secured Cloud Network - The Case of an Educational Institute 150 Geetu Sharma, Savitri Bevinakoppa, Sitalakshmi Venkatraman

Applying Puzzle Encryption in the On-Demand Routing Protocols in Mobile Ad Hoc Networks (MANETs)

156 Ahmad Alomari

Mobile Robot Navigation with Front Moving Stereo Vision System in Single Camera 162 Sewoong Jun, Young-Ouk Kim

Recent Researches in Information Science and Applications

ISBN: 978-1-61804-150-0 8

(10)

Level of IT Utilization and Policy Implications in the Healthcare and Education Fields 168 Seung-Jun Yeon, Sung-Hyun Hwang, Hee-Kyung Kong

The Monge-Ampère Equation and the Statics of Masonry Vaults 173 Alessandro Baratta, Ottavia Corbi

Numerical Modeling of the Shape of Cells for the Optimization of the Mechanical Properties of Brick Blocks

179 Dora Foti, Andrea Romanazzi

Issues for the Design of SMA Devices for Structural Control 184 Ottavia Corbi, Abdel Hamid Ibrahim Zaghw

Masonry Domes: Equilibrium States and Structural Assessment 190 Alessandro Baratta

An Innovative and Modular Timber System for Execution of Arches And Vaults 196 Dora Foti, Andrea Romanazzi, Domenico De Tommasi

MR Fluids for Smart Seismic Protection of Civil Structures 201

Ottavia Corbi, Rui Carneiro De Barros

Erosion Hazard Assessment of the Cilento Coastal Stretch (Southern Italy) 207 Paolo Budetta

Comparison of Multiple IaaS Cloud Platform Solutions 212

Omar Sefraoui, Mohammed Aissaoui, Mohsine Eleuldj

Multiobjective Electricity Power Dispatch Based PSO 218

Shupeng Wu, Hongwen Yan

Improving Churn Prediction in Telecom through Dataset Decoration 223 Silvia Trif, Adrian Visoiu

Influence of Age and Medicaments on Biometric Verification 229

Lucie Krcalova

The Amendolea castle in Reggio Calabria: The Ruins Safety and the Concept of “Restricted Usability”

233 Michele Candela, Roberta Fonti

FRP Composites for the Reinforcement of NT Plane Structures: Theoretical and Experimental Results

238 Ileana Corbi

Seismic Assessment and Retrofitting of Existing Railway Bridges 244 L. Di Sarno, B. Del Principe

Protection of an Historical Islamic Minaret by Passive and Semi-Active Control Strategies 250 Ottavia Corbi, Adel Elattar, Ahmed Saleh, Abdel Hamid Ibrahim Zaghw

Recent Researches in Information Science and Applications

ISBN: 978-1-61804-150-0 9

(11)

Probabilistic Models for Seismic Risk Analysis 256 Ileana Corbi

The Soil-Fluxion Pathology in Calabria Area: Case History and Innovative Strategy of Intervention

262 Michele Candela, Roberta Fonti

Visco-Re-Centring Energy Dissipating System for Seismic Protection of Framed Buildings 268 Felice C. Ponzo, Antonio Dicesare, Domenico Nigro

Shaking Table Testing for the Experimental Analysis of Some Structural Models Equipped with Dynamic Control Devices

274 Ileana Corbi, Zoran T. Rakicevic

Modeling and Nonlinear Seismic Analysis of Framed Structures Equipped with Damped Braces 280 Mazza Fabio, Vulcano Alfonso, Mazza Mirko, Mauro Giuseppe

Cascading Transformations and Vector Quantization in Image Compression 286 Vascan Orest, Weingart Mircea

Progressive Compression of 3D Objects 292

Zeineb Abderrahim

Robust H∞ Technique for Designing an Advanced PID-PSS Controller to Enhance Performances and Robustness of a SMIB Power System

297 Horch Abdessamad, Naceri Abdellatif

Authors Index 303

Recent Researches in Information Science and Applications

ISBN: 978-1-61804-150-0 10

(12)

Plenary Lecture 1

Approaches to Engineer Interactions between Distributed Components

Professor Giacomo Cabri

Dipartimento di Ingegneria dell'Informazione Universita' di Modena e Reggio Emilia

Italy

E-mail: giacomo.cabri@unimore.it

Abstract: In today’s distributed systems, engineering interactions between components is a crucial issue, which requires decoupling and coordination. In this talk I propose a couple of approaches that have been applied to software agents. The former one is based on reactive and programmable tuple spaces, which decouples the interactions between agents and at the same time can be adapted to specific needs and can make the environment actively participate in the interactions. The latter approach is based on the concept of role, which is a behavior common to different entities; this allows to decouple the interaction logic from the application logic.

Brief Biography of the Speaker: Giacomo Cabri is an associate professor in Computer Science at the University of Modena and Reggio Emilia since 2006. His current research interests include: distributed systems, complex agent systems, software engineering, mobile computing, and object-oriented programming. In these areas, he has published more than 120 publications, among which 27 in peer-reviewed international journals, and he has received 4 best paper awards. He was involved in different national and international research projects. He is in the program committee of several workshops and conferences and has been General Chair of IEEE WETICE 2004 and of ACM PPPJ 2008. He is member of ACM and IEEE.

Recent Researches in Information Science and Applications

ISBN: 978-1-61804-150-0 11

(13)

Plenary Lecture 2

Shape Memory Alloys: Mechanical Behaviour Modelling, Design Issues, Smart Devices and Numerical Implementation for Structural Control Applications

Professor Ottavia Corbi Department of Structural Engineering

University of Naples Federico II Italy

E-mail: ottavia.corbi@unina.it

Abstract: Shape Memory Alloys’ properties may be successfully exploited for designing effective and reliable devices for the attenuation of the response of civil structures. A number of issues should be accounted for ranging from modeling problems, also with reference to not uni-axial mechanical relationships, to implementation and design issues, that are proposed and analyzed in the lecture.

Brief Biography of the Speaker: Ottavia Corbi graduated at the University of Naples Federico II in 1996, and, then, in 2000 with a Ph.D. degree in Structural Engineering. From 2000 she has been teaching courses on main topics of Structural Mechanics in the Department of Science of Costructions at the University of Naples. Since 2002 then she has been a faculty member of the Department of Science of Constructions and, thereafter, of the Department of Structural Engineering of the University of Naples, serving as an assistant professor from 2002 to 2004, and as an associate professor from 2004 to 2012. Her research interests include structural dynamics and control of vibrations, optimization methods, materials’ modeling, static and dynamic analysis of masonry constructions, composite materials, stochastic mechanics. She is author of four books and more than 120 papers published in international journals and conference proceedings. She has also delivered many speeches at various international conferences.

Recent Researches in Information Science and Applications

ISBN: 978-1-61804-150-0 12

(14)

Plenary Lecture 3

On the Mechanics of Masonry Vaults: Theoretical and Technical Approaches

Professor Alessandro Baratta Department of Civil Engineering University of Naples "Federico II"

ITALY

E-mail: alessandro.baratta@unina.it

Abstract: Basic properties of masonry do not allow to rely on tensile strength, and flexural models cannot be trusted on. It is is recognized that, apart from a few cases, the No-Tension assumption yields a effective model for structural assessment. The theory is briefly illustrated, and its application to vaults is explained in detail, leading to a Monge- Ampere equation ruling the static regime through a membrane stress surface.

Brief Biography of the Speaker: Prof. Alessandro Baratta graduated in Civil Engineering in 1969. Since 1980 he is Full Professor of "Science of Constructions" of the University of Naples "Federico II". Head of the Dept. of Scienza delle Costruzioni from 1997 to 2003. Member of the Administrative Board of the University of Naples from 2001 to 2003. Past vice-President of the European Association for Structural Control (EACS) and past member of the Council of the British Masonry Society. Adviser of the Italian National Researches Council (CNR) for Technical Standards.

Author or co-author of more than 300 scientific publications and of 3 scientific and didactic books. The research activity is articulated on the following main themes: Probabilistic Theory of Structural Mechanics, Structural Safety, Limit Analysis, Theory of Structures, Aseismic Engineering, Solids and Structures made by No-Tension Material;

Theory and Technique of Masonry Buildings, Seismic Risk Analysis, Active Control of Civil Engineering Structures.

Author of more than 300 published papers, memoirs and interventions to meetings. He is co-author of a monograph book, "PROBABILISTIC METHODS IN STRUCTURAL ENGINEERING" (Chapman & Hall Editors, London, 1984, also translated in Russian) and of another book entitled ''SEISMIC RISK IN HISTORIC CENTRES'' (Ed. Del Sole, Napoli, 1996). Finally he has published a didactic book (in Italian) ''LEZIONI DI SCIENZA DELLE COSTRUZIONI'' Ed. Liguori, Napoli, 1996.

Recent Researches in Information Science and Applications

ISBN: 978-1-61804-150-0 13

(15)

Authors Index

Abdellatif, N. 297 Jang, J. 114 Orest, V. 286 Abderrahim, Z. 292 Janků, L. S. 130 Park, H.-S. 54 Abdessamad, H. 297 Jeon, E. C. 74 Park, J. 114 Ahn, C.-W. 41, 54 Jeon, J. D. 74 Park, Y. 114 Aissaoui, M. 212 Jeon, R.-W. 108 Ponzo, F. C. 268 Alomari, A. 156 Jun, S. 162 Rakicevic, Z. T. 274 Al-Taay, A. A. J. 29 Kačerginskis, E. 90 Respondek, J. S. 15 Bae. H.-E. 41 Kang, S. 41 Rezai, S. M. 19

Baek, S. 114 Kasbon, R. 24 Rho, G. 86, 103

Baek, S.-H. 41 Kim, H.-S. 41 Romanazzi, A. 179, 196 Baratta, A. 173, 190 Kim, S. M. 74 Ryu, G.-R. 68 Bevinakoppa, S. 150 Kim, S.-P. 108 Ryu, S. H. 119 Budetta, P. 207 Kim, T.-S. 136, 140 Sahib, S. B. 29 Cakula, S. 97 Kim, Y.-O. 162 Saleh, A. 250 Candela, M. 233, 262 Kiousis, K. N. 35 Sedleniece, M. 97 Cho, S. 103 Kitatsuji, Y. 60 Sefraoui, O. 212 Choi, J. 54 Komorita, S. 60 Sharma, G. 150 Corbi, I. 238, 256, 274 Kong, H.-K. 168 Siau, N. Z. 48 Corbi, O. 173, 184, 201 Krcalova, L. 229 Son, H. 103 Corbi, O. 250 Kwon, P. 82 Song, H. Y. 119 De Barros, R. C. 201 Lee, Jaeeun 103 Stone, R. G. 48 De Tommasi, D. 196 Lee, Joon-Ho 108 Stoykova, V. 144 Del Principe, B. 244 Lee, Jae-Hoon 108 Trif, S. 223 Di Sarno, L. 244 Lee, Jae-Hun 108 Venkatraman, S. 150 Dicesare, A. 268 Lee, S. G. 125 Visoiu, A. 223 Divrazm, F. R. 19 Mahamad, S. 24 Vulcano, A. 280 Elattar, A. 250 Mauro, G. 280 Wu, S. 218 Eleuldj, M. 212 Mazza, F. 280 Yan, H. 218 Fonti, R. 233, 262 Mazza, M. 280 Yang, W. S. 136, 140 Foti, D. 179, 196 Mean, F. O. 24 Yeon, S.-J. 168 Golkhayli, T. 19 Mircea, W. 286 Yokota, H. 60 Han, S.-H. 68 Moronis, A. X. 35 Yoo, T. 77 Hinde, C. J. 48 Narbutaitė, L. 90 Yoon, G. H. 74

Hong, D.-E. 68 Nem, S. 24 Yu, K. 86, 103

Hwang, S.-H. 168 Nigro, D. 268 Yücesan, E. 77 Hyniová, K. 130 Nodhi, A. N. 19 Zaghw, A. H. I. 184, 250 Ito, M. 60 Nodhi, H. F. 19 Zamani, M. 29

Recent Researches in Information Science and Applications

ISBN: 978-1-61804-150-0 303

Riferimenti

Documenti correlati

Wang is the initiator of a few cutting-edge research fields such as cognitive informatics, denotational mathematics (concept algebra, process algebra, system algebra, semantic

She received her MEng in Civil Engineering in 1982, a PhD degree in Structural Mechanics in 1987 from Voronezh Civil Engineering Institute, a DSc degree in Solid Mechanics in

He is the author of over 70 publications in the area of parallel and distributed computing, including journals such as International Journal of High Performance Computing

• Licensed in Economy, Faculty Economic Sciences, specialization Accounting and Management Information Systems, at the „George Baritiu” University of Brasov, Romania (2004);.

His scientific work is focused on real time control in solid mechanics applied in robot trajectory control, hybrid position – force control, multi-microprocessor systems for

Here is proposed to exploit the ability of parallel processing and the high-speed memory access of graphical processing units (GPU), which is essential in the

This year the 5th WSEAS International Conference on Landscape Architecture (LA '12), the 1st International Conference on Lakes, Rivers, Groundwater and Sea (LARIGS '12), the

The overall goal of the research on Smart Prosthetic Hand Technology that has been going on at Idaho State University is to develop a smart prosthetic hand using intelligent