Bibliografia
127
BIBLIOGRAFIA
1. T. Daniels, “Thermal analysis”, Kogan Page (1973);
2. Takayuki Murayama, “Dinamic mechanical analysis of polymeric material”, Elsevier (1978);
3. William D. Callister, Jr., “Scienza ed Ingegneria dei materiali”, Edizioni Edises, (2004);
4. Robert M. Silverstein, Francio Webster, “Identificazione spettroscopica di composti organici“;
5. Maria Pizzoli, Dipartimento di chimica “G. Ciamician” Università di Bologna,
“Tecniche di caratterizzazione Analisi termica”;
6. Simona Monaco, Tesi di laurea in Ingegneria Chimica, “Riutilizzo di idrolizzato proteico dalla scarnatura delle pelli”, anno accademico 2003/2004, Università di Pisa;
7. Nabanita Saha, Martin Zatloukal, Petr Saha, Polymer Centre, Faculty of Technology, Tomas Bata University in Zlin, “Modification of Polymers by Protein Hydrolysate - A way to Biodegradable Materials”, Polymers for Advanced Technologies 14, 854-860 (2003);
8. Chiellini E., Cinelli P., Corti A., Kenawy El Refaye, “Composite films based on waste gelatin: thermal-mechanical properties and biodegradation testing”, Polymer Degradation and Stability 73, 549 –555 (2001);
9. Chiellini E., Cinelli P., Alexy P., Bakos D., Hanzelova S., Kukolikova L., Kupec J., Charvatova K., “PVA-collagen hydrolysate thermoplastic blend: I.
Experimental design optimisation and biodegradation behaviour”, Polymer Testing 22, 801–809 (2003);
Bibliografia
128 10. Chiellini E., Cinelli P., Alexy P., Bakos D., Crkonova G., Kramarova Z., Hoffmann J., Julinova M., “PVA-collagen hydrolysate thermoplastic blend: II. Water penetration and biodegrability of melt extruded films”, Polymer Testing 22, 811–818 (2003);
11. Colom X., Carrasco F., Pagès P. , Canàvate J., “Effects of different treatments on the interface of HDPE/lignocellulosic fiber composites”, Composites Science and Technology 63, 161-169 (2003);
12. Balasuriya P. W., Ye L., Mai Y. -W., “Mechanical properties of wood flake – polyethylene composites. Part I: effect of processing methods and matrix melt flow behaviour”, Composites: Part A 32, 619-629 (2001);
13. Vignali L., Tesi di laurea in Ingegneria Chimica, “Matrici polimeriche con cariche da fonti rinnovabili”,. anno accademico 200?-200?, Università di Pisa;
14. Lundquist L., Marque B., Hagstrand P. -O., Leterrier Y., Månson J.-A.E., “Novel pulp fibre reinforced thermoplastic composites”, Composites Science and Technology 63 137-152 (2003);
15. Brahmakumar M., Pavithran C., Pillai R. M., “Coconut fibre reinforced polyethylene composites: effect of natural waxy surface layer of the fibre on fibre/matrix interfacial bonding and strength of composites”, Composites Science and Technology 65 563-569 (2005);
16. Danjaji I. D., Nawang R., Ishiaku U. S., Ismail H., Mohd Ishak Z.A.M.,
“Degradation studies and moisture uptake of sago- starch-filled linear low- density polyethylene composites”, Polymer Testing 21, 75–81 (2002);
17. Kuruvilla Joseph, Sabu Thomas, Pavithran C., “Effect of ageing on the physical and mechanical properties of sisal-fiber-reinforced polyethylene composites”, Composites Science and Technology 53, 99-110 ( 1995);
Bibliografia
129 18. Jayamol George, Janardhan R., Anand J. S., Bhagawan S. S., Sabu Thomas., “Melt rheological behaviour of short pineapple fibre reinforced low density polyethylene composites”, Polymer Vol. 37 No. 24, 5421-5431 (1996);
19. Singleton A.C.N., Baillie C.A., Beaumont P.W.R., Peijs T., “On the mechanical properties, deformation and fracture of a natural fibre/recycled polymer composite”, Composites Part B 34, 519–526 (2003);
20. Barone J. R., Schmidt W. F., “Polyethylene reinforced with keratin fiber obtained from chicken feathers”, Composites Science and Technology 65, 173–181 (2005);
21. Barone J. R., Schmidt W. F., Liebner Christina F. E., “Compounding and molding of polyethylene composites reinforced with keratin feather fiber”, Composites Science and Technology 65, 683 –692 (2005);
22. Barone J. R., “Polyethylene/keratin fiber composites with varying polyethylene crystallinity”, Composites: Part A 36, 1518–1524 (2005);
23. Dascalu Mihaela C., Vasile Cornelia, Silvestre Clara, Pascu Mihaela., “On the compatibility of low density polyethylene/hydrolyzed collagen blends. II:New compatibilizers”, European Polymer Journal 41, 1391 –1402 (2005);
24. Tchmutin Igor, Ryvkina Natalia., “Study on biodegradability of protein filled polymer composites using dieletric measurements”, Polymer Degradation and Stability 86, 411-417 (2004);
25. Chiellini E., Corti A., Swift G., “Biodegradation of thermally-oxidized, fragmented low-density polyethylenes”, Polymer Degradation and Stability 81, 341-351 (2003).
