• Non ci sono risultati.

Process Systems Engineering

N/A
N/A
Protected

Academic year: 2021

Condividi "Process Systems Engineering"

Copied!
1
0
0

Testo completo

(1)

Process Systems Engineering 

 

Prof. Davide Manca 

Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta” 

Politecnico di Milano 

 

 

Exercise #3 

 

Calculate  the  economic  potential  of  level‐2  related  to  the  process  conditions  used  in  previous  lessons considering the following costs of raw materials and products: 

 

Composition  Cost [€/kmol]

Benzene  12.5 

Toluene  8.8 

Hydrogen  2.1 

Biphenyl  7.4 

 

In the assessment of EP2, consider the value of heat of combustion of products i.e. 4€/MBtu. 

 

Composition  Hc [MBtu/kmol] 

Hydrogen  0.123 

Methane  0.383 

Benzene  1.41 

Toluene  1.68 

Biphenyl  2.688 

 

Consider 8000 working hours per year. 

 

Produce the following diagrams: 

 

 purge ratio / EP2 imposing minimum selectivity of 0.96 

 molar fraction of hydrogen in vent / EP2 imposing the minimum selectivity of 0.96 

 conversion / EP2 as a function of the molar fraction of hydrogen in the vent 

 temperature / EP2 as a function of the molar fraction of hydrogen in the vent   

 

Riferimenti

Documenti correlati

Consider  that  the   period  of  depreciation  of  equipment  is  5  years  for  both  the  reactor  and  the  compressor. . For the calculation of the investment

Politecnico di Milano argues that the profitability depends on the management of the plant and boasts of its experience in process engineering and dynamic conceptual design..

An insider from Politecnico di Milano, speaking on condition of anonymity, confirmed this rumor but refused to provide further details, like the number of candidates and

OUR IN-DEPTH ANALYSIS ON THE HDA PROCESS The Hydrodealkylation (HDA) of toluene is a chemical reaction that yields benzene according to the following:.. Toluene +

Therefore, despite the impressive construction, it appears likely that the market of the commodities will not be significantly affected in the long term.. 4 – October

Politecnico di Milano has granted the PSE Journal direct access to the performance of the plants and their connected financial accounts.. This will allow us to

Calculate  the  economic  potential  of  fourth  level  by  applying  the  following  correlations, 

Steady  state  and  dynamic  simulation  of  industrial  processes.  Cost  estimation.  Economic  assessment  of  the  CAPEX  and  OPEX  terms.  Classical