Bibliografia
Bibliografia
Bibliografia
(in ordine cronologico)
• Stahl H.A. and Stepanoff A.J., 1956, Thermodynamics Aspects of Cavitation in Centrifugal
Pumps, ASME J. Basic Eng., 87, 309.
• Sack L.E. and Nottage H.B., 1965, System Oscillations Associated to Cavitating Inducers,
ASME J. Basic Eng., Vol. 87, pp. 917-924.
• Rubin S., 1966, "Longitudinal Instability of Liquid Rockets Due to Propulsion Feedback
(POGO)", J. Spacecraft and Rockets, Vol. 3, No. 8, pp. 1188-1195
• Murai H., 1968, “Observations of Cavitation and Flow Patterns in an Axial Flow Pump at
Low Flow Rates”, Mem. Inst. High Speed Mech., Tohoku Univ., 24, No.246
• Ruggeri R.S and Moore R.D., 1969, Method for Prediction of Pump Cavitation
Performance for Various Liquids, Liquid Temperatures and Rotative Speeds, NASA TN
D-5292.
• Brennen C.E., 1973, The Dynamic Behavior and Compliance of a Stream of Cavitating
Bubbles, ASME J. Fluids Eng., Vol. 95, pp. 533-542.
• Brennen C.E. and Acosta A.J., 1973, Theoretical, Quasi-Static Analysis of Cavitation
Compliance in Turbopumps, J. Spacecrafts & Rockets, Vol. 10, No. 3, pp. 175-180.
• Brennen C.E. and Acosta A.J., 1976, The Dynamic Transfer Function for a Cavitating
Inducer, ASME J. Fluids Eng., Vol. 98, pp. 182-191.
• Ng S.L. and Brennen C.E., 1978, Experiments on the Dynamic Behavior of Cavitating
Pumps, ASME J. Fluids Eng., Vol. 100, No. 2, pp. 166-176.
• Brennen C. E., 1978, “Bubbly Flow Model for the Dynamic Characteristics of Cavitating
Pumps”, Journal of Fluid Mechanics, 89, part 2, pp. 223-240
• Braisted D.M. and Brennen C.E., 1980, Auto-oscillation of Cavitating Inducers, Polyphase
Flow and Transport Technology, ed. R.A. Bajura, ASME Publ., New York, pp. 157-166.
• Greitzer E.M., 1980, The Stability of Pumping Systems, ASME J. Fluids Eng., Vol. 103, pp.
193-242.
• Braisted D. M., 1980, “Cavitation induced instabilities associated with turbomachines” PhD
thesis, California Institute of Technology, Pasadena, California, USA.
• Jery B. et al., 1985, Forces on Centrifugal Pump Impellers, 2nd Int. Pump Symp., Houston,
Texas, USA, April 29-May 2, 1985.
• Kawata Y., Takata T., Yasuda O., Takeuchi T., 1988, “Measurement of the Transfer Matrix
of a Prototype Multi-Stage Centrifugal Pump”, paper no. C346/88, IMechE, pp. 137-142
• Brennen CE. et al., 1988a, Effects of Cavitation on Rotordynamic Force Matrices, Proc. 3rd
Earth to Orbit Propulsion Conf., Huntsville, AL, USA, NASA Conf. Publ. 3012, pp. 227-239.
• Brennen CE. et al., 1988b, Rotor/Stator Unsteady Pressure Interaction, Proc. 3rd Earth to
Orbit Propulsion Conf., Huntsville, AL, USA , NASA Conf. Publ. 3012, pp. 240-253.
• Kawata Y., Takata T., Yasuda O., Takeuchi T., 1988, "Measurement of the Transfer Matrix of
a Prototype Multi-Stage Centrifugal Pump", paper no. C346/88, IMechE, pp. 137-142.
• Franz R. et al., 1989, The Rotordynamic Forces on a Centrifugal Pump Impeller in the
Presence of Cavitation, Proc. ASME Symp. Pumping Machinery – 1989 (ed. P. Cooper),
F.E.D., Vol. 81, pp. 205-212.
Analisi della caratterizzazione di turbopompe cavitanti
• Tsujimoto Y., Kamijo K., Yoshida Y., 1993, “A Theoretical Analysis of Rotating Cavitation
in Inducers”, ASME Journal of Fluids Engineering, 115, pp. 135-141.
• Brennen C. E., 1994, “Hydrodynamics of Pumps”, Concepts Eti, Inc and Oxford University
Press.
• Bhattacharyya A., 1994, Internal Flows and Force Matrices in Axial Flow Inducers, Ph. D.
thesis, Division of Engineering and Applied Science, California Institute of Technology, Pasadena, California, USA.
• Otsuka S., Tsujimoto Y., Kamijo K., Furuya O., 1996, “Frequency Dependence of Mass
Flow Gain Factor and Cavitation Compliance of Cavitating Inducers”, ASME Journal of
Fluids Engineering, 118, pp. 400-408
• d’Agostino L. and d’Auria F., 1997, Three-Dimensional Analysis of Rotordynamic Forces
on Whirling and Cavitating Inducers, 1997 ASME Fluids Engineering Division Summer
Meeting, Vancouver, British Columbia, Canada, June 22-26.
• Hashimoto T., Yamada H., Funatsu S., Ishimoto J., Kamijo K. and Tsujimoto Y., 1997a,
Rotating Cavitation in Three and Four-Bladed Inducers, AIAA Paper 97-3026, 33rd
AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Seattle, Washington, USA, July 6-9.
• Hashimoto T., Yamada H., Watanabe M., Kamijo K. and Tsujimoto Y., 1997b, Experimental
Study on Rotating Cavitation of Rocket Propellant Pump Inducers, J. Propulsion Propulsion
and Power, Vol. 13, No. 4, pp. 488-494.
• Immich H., and Caporicci M., 1997, Status of the FESTIP Rocket Propulsion Technology
Programme, AIAA Paper 97-3311, 33rd AIAA/ASME/SAE/ASEE Joint Propulsion
Conference, USA.
• Tsujimoto Y., Watanabe S., Horiguchi H., 1998, “Linear Analyses of Cavitation Instabilities
of Hydrofoils and Cascades”, Proc. of US-Japan Seminar: Abnormal Flow Phenomena in
Turbomachinery, Osaka, Japan.
• Cervone A., 2000, “Progetto costruttivo definitivo di un impianto di prova in similitudine di
turbopompe cavitanti”, Thesis, Pisa University, Italy.
• Zoladz T., 2000, Observations on Rotating Cavitation and Cavitation Surge from the
Development of the Fastrac Engine Turbopump, 36th AIAA/ASME/SAE/ASEE Joint
Propulsion Conference, Huntsville, AL, USA, July 17-19.
• Tsujimoto Y., 2001, Simple Rules for Cavitation Instabilities in Turbomachinery, lecture
from CAV 2001, 4th International Symposium on Cavitation, Caltech, Pasadena, CA, USA,
20-23 June 20-23.
• Shimura T., Yoshida M., Kamijo K., Uchiumi M., Yasutomi Y., 2002, “Cavitation Induced
Vibration Caused by Rotating-Stall-Type Phenomenon in LH2 Turbopump”, Proceedings of
ISROMAC-9 - the 9th International Symposium on Transport Phenomena and Dynamics of
Rotating Machinery, Honolulu, Hawaii, USA
• Tsujimoto Y., Semenov Y. A., 2002, New Types of Cavitation Instabilities in Inducers, 4th
Int. Conf. on Launcher Technology, Liege, Belgium, Dec. 3-6.
• Fruman D.H., 2002, Review of Thermal effects in the Cavitation of Inducers, 4th
International Conference on Launcher Technology, Liege, Belgium, December 3-6.
• Shimura T., Shimagaki M., Watanabe Y., Watanabe M., Hasegawa S., Takata S., 2003,
“Cavitation Induced Vibration of LE-7A Oxygen Turbopump”, CAV2003, Int. Symposium
on Cavitation, Osaka, Japan, November 1-4
• Imamura H., Kurokawa J., Matsui J., Kikuchi M., 2003, “Suppression of Cavitating Flow in
Inducer by J-Groove”, CAV2003, Int. Symposium on Cavitation, Osaka, Japan
Bibliografia
• Jun S. I., Tokumasu T., Kamijo K., 2003, “Dynamic Response Analysis of High Pressure
Rocket Pumps”, Proc. of CAV2003 – Fifth International Symposium on Cavitation, Osaka, Japan.
• Uchiumi M., Kamijo K., Hirata K., Konno A., Hashimoto T., Kobayasi S., 2003,
“Improvement of Inlet Flow Characteristics of LE-7A Liquid Hydrogen Pump”, Journal of
Propulsion and Power, Vol. 19, No. 3
• Cervone A., 2005, “Experimental characterization of cavitation and flow instabilities in axial
inducers and hydrofoils”, PhD thesis, Pisa University, Italy.
• Cervone A., Testa R., Bramanti C., Rapposelli E., and d'Agostino L., 2005, Thermal Effects
on Cavitation Instabilities in Helical Inducers, AIAA J. of Propulsion and Power, Vol. 21,
No. 5, pp. 893-899.
• Kimura T., Yoshida Y., Hashimoto T., Shimagaki M., 2006, “Numerical Simulation for
Unsteady Cavitating Flow in a Turbopump Inducer”, CAV2006, 6th Int. Symposium on
Cavitation, Wageningen, The Netherlands.
• Subbaraman M., Patton M., 2006, “Suppressing Higher-Order Cavitation Phenomena in
Axial Inducers”, CAV2006, 6th Int. Symposium on Cavitation, Wageningen, The
Netherlands
• Cervone A., Bramanti C., Rapposelli E. & d'Agostino L., 2006a, “Thermal Cavitation
Experiments on a NACA 0015 Hydrofoil”, ASME J. of Fluids Engineering, Vol. 128, Is. 2,
March 2006, pp. 326-331.
• Cervone A., Torre L., Bramanti C., Rapposelli E., d'Agostino L., 2006, "Experimental
Characterization of Cavitation Instabilities in a Two-Bladed Axial Inducer", AIAA Journal of Propulsion and Power, Vol. 22, No. 6, pp. 1389-1395.
• Cervone A., Bramanti C., Torre L., Fotino D., d'Agostino L., 2007, "Setup of a High-Speed
Optical System for the Characterization of Flow Instabilities Generated by Cavitation", ASME Journal of Fluids Engineering, Vol. 129, Is. 7, pp. 877-885.
• Kang D., Cervone A., Yonezawa K., Horiguchi H., Kawata Y., Tsujimoto Y., 2007, “Effect
of Blade Geometry on Tip Leakage Vortex of Inducer”, The 9th Asian International
Conference on Fluid Machinery, Jeju, South Korea
• Cervone A., Torre L., Pasini A., d’Agostino L., 2008, “Cavitation and Turbopump
Hydrodynamics Research at Alta S.p.A. and Pisa University”, The 4th International
Symposium on Fluid Machinery and Fluid Engineering, Beijing, China
• Watanabe T., Kang D., Cervone A., Kawata Y., Tsujimoto Y., 2008, “Choked Surge in a
Cavitating Turbopump Inducer”, International Journal of Fluid Machinery and Systems,
Vol. 1, No. 1, Oct-Dec 2008, pp. 64-75
• d’Agostino L., Torre L., Pasini A., Baccarella D., Cervone A., Milani A., 2008, “A Reduced
Order Model for Preliminary Design and Performance Prediction of Tapered Inducers: Comparison with Numerical Simulations”, 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Hartford, Connecticut, USA.
• Yamamoto K., Tsujimoto Y., 2008, “Backflow Vortex Cavitation and Its Effects on
Cavitation Instabilities”, Proc. of WIMRC Cavitation Forum, Warwick University, GB.
• Cervone A., Tsujimoto Y., Kawata Y., 2008, “Analytical model for the characterization of
the dynamic transfer matrix of cavitating inducers”, The 12th International Symposium on
Transport Phenomena and Dynamic of Rotating Machinery, Honolulu, Hawaii, February 17-22, 2008, ISROMAC12-2008-20056.
• D'Agostino L., Torre L., Pasini A., Cervone A., 2008, “A reduced order model for
preliminary design and performance prediction of tapered inducers”, The 12th International
Analisi della caratterizzazione di turbopompe cavitanti
Symposium on Transport Phenomena and Dynamic of Rotating Machinery, Honolulu, Hawaii, February 17-22, 2008, ISROMAC12-2008-20256.
• Cervone A., Tsujimoto Y., Kawata Y., 2009, “Evaluation of the Dynamic Transfer Matrix of
Cavitating Inducers by Means of a Simplified Lumped-Parameter Model”, ASME Journal of Fluids Engineering, Vol. 131, Is. 4.
