Final report Emanuele Vincenzo Arcieri

Testo completo

(1)PhD in Technology, Innovation and Management – TIM XXXIII cycle. Final report Emanuele Vincenzo Arcieri Tutor: Prof. Sergio Baragetti. Courses .......................................................................................................................................... 2 Summer schools ............................................................................................................................ 2 Conferences ................................................................................................................................... 3 Seminars ........................................................................................................................................ 4 Webinars ....................................................................................................................................... 5 Publications ................................................................................................................................... 5 Member of the Organizing Commitee .......................................................................................... 8 Referee for..................................................................................................................................... 8 Teaching assistant ......................................................................................................................... 8 Tutor .............................................................................................................................................. 8 Subject Expert ............................................................................................................................... 8 Co-advisor for the Bachelor’s degree thesis.................................................................................. 9 Co-advisor for the Master’s degree thesis ..................................................................................... 9 Other activities ............................................................................................................................ 10.

(2) Courses 1). I year (courses offered by the program). ·. Research Design, Scientific writing, Oral Presentation;. ·. Intellectual property management;. ·. Research ethics;. ·. Fund raising and project writing and management;. ·. Simulation methods and tools;. ·. Design of Experiments – DOE;. ·. Applied Statics;. ·. Product and process sustainability;. ·. Applied programming.. 2). II year (courses offered by the program). ·. Il valore della complessità. ·. From a literature review to a conceptual framework: how to develop research model and hypotheses. 3). II year (courses taken from Master degrees at University of Bergamo). ·. Costruzioni in acciaio 6 CFU Prof. Andrea Belleri. ·. Elettronica industriale 6 CFU Prof. Massimo Manghisoni. Summer schools 1). 4th ESIS Summer School: Fatigue and Fracture Modeling and Analysis, Dubrovnik (Croatia), 14-15 august 2017. 2). Advance in Design Connection, AIAS Summer school, Ferrara (Italy), 11-14 June 2018. 3). Fatigue and Fracture Modeling and Analysis, Dubrovnik (Croatia), June 3 – 4, 2019. 4). Advances in experimental methods, AIAS Summer School, virtual course, 15 – 18 June 2020 2.

(3) 5). Fatigue and Fracture Modeling and Analysis, Dubrovnik (Croatia), September 14 – 15, 2020. Conferences 1). ICSID (International Conference on Structural Integrity and Durability), Dubrovnik (Croatia), 15-18 August 2017. 2). Convegno Nazionale AIAS, Pisa (Italy), 6-9 September 2017. 3). International CAE Conference and Exhibition, Vicenza (Italy), 6-7 November 2017. 4). Stress-Assisted Corrosion Damage V, Hernstein (Austria), 15-20 July 2018. 5). International Conference on Fracture and Damage Mechanics, Seville (Spain), 4-6 September 2018. 6). Convegno Nazionale AIAS, Villa S. Giovanni, RC (Italy), 5-8 September 2018. 7). ICSID (International Conference on Structural Integrity and Durability), Dubrovnik (Croatia), 2-5 October 2018. 8). International CAE Conference and Exhibition, Vicenza (Italy), 8-9 November 2018. 9). ICSID (International Conference on Structural Integrity and Durability), Dubrovnik (Croatia), 4-7 June 2019. 10). International Conference Mechanics and Materials in Design, Bologna (Italy), 4-6 September 2019 (only submission of a poster). 11). Convegno Nazionale AIAS, Assisi (Italy), 4-7 September 2019. 12). International Conference on Fracture and Damage Mechanics, Rodos (Greece), 1618 September 2019. 13). International Mechanical Engineering Congress & Exposition, Salt Lake City (Utah), 11-14 November 2019. 14). Convegno Nazionale AIAS, virtual, 2-4 September 2020. 15). ICSID (International Conference on Structural Integrity and Durability), Dubrovnik (Croatia, virtual), 15-18 September 2020. 16). International Conference on Fracture and Damage Mechanics, virtual, 14-17 September 2020. 3.

(4) Seminars 1). Realizzare una presentazione orale convincente: il ruolo (spesso sottovalutato) della comunicazione non verbale, Prof.ssa Paleari, Università degli Studi di Bergamo, 06 October 2017, in Dare un valore alla ricerca. 2). Vademecum brevetti per il mondo universitario, Proff. Ginevra e Russo, Università degli Studi di Bergamo, 11 October 2017, in Dare un valore alla ricerca. 3). Heat and Mass Transfer in Droplets, Part 1 and 2, Prof. Sazhin, Università degli Studi di Bergamo, 14-15 December 2017. 4). Understanding Dimensional Analysis Part 1 (+ Workshop), Prof. Weigand, Università degli Studi di Bergamo, 14 March 2018. 5). Testimonianze di valutatori di proposte di ricerca in risposta a bandi competitivi, Prof.sse Morganti e Rizzi, Università degli Studi di Bergamo, 22 February 2018, in Dare un valore alla ricerca. 6). Numerical modelling of fatigue crack propagation in thin walled structures, Prof. Zeljko Bozic, Università degli Studi di Bergamo, April 18, 2018. 7). Measuring micron-scale characteristics of materials, fluids, and interfaces in porous media: Applications in environmental engineering, Prof. Dorthe Wildenschild, Università degli Studi di Bergamo, September 17, 2018. 8). Dare valore alla ricerca: Comunicare nell’era 4.0, relatrice: Cinzia Xodo, 1017/10/2018, Università degli Studi di Bergamo. 9). Dare valore alla ricerca: Comunicare la ricerca: buone pratiche sul data visualization, relatore: dr. Aldo Cristadoro, 25/10/2018, Università degli Studi di Bergamo. 10). Uso di strumenti informatici a supporto del ricercatore, novembre-dicembre 2018, Università degli Studi di Bergamo. 11). Dare valore alla ricerca: Diritto d’autore e tesi di dottorato, relatore: Armando Di Troia, 05/12/2018, Università degli Studi di Bergamo. 12). The separation of ownership and control in firms: costs and benefits, relatore: Prof. Marc Deloof, 18/06/2019, Università degli Studi di Bergamo. 4.

(5) Webinars 1). Ansys e EnginSoft, Ansys Campus | Meccanica, 5 maggio 2020, ore 14.30. 2). Dassault Systemes, 3DExperience: La progettazione ai tempi dello smart working, 19 maggio 2020, ore 9.30. 3). 3DZ, Materialise e le novità Magics, 4 giugno 2020, ore 11.00. 4). Dr. Konstantinos Agathos, Full and Reduced Order Modelling for Digital Twinning with Applications to Damage Detection, June 12, 2020, 3.00 – 4.00 pm. 5). Ing. Carlo Tuzza, Introduzione a MIDAS FEA NX, June 23, 2020, at 3.00 pm. 6). Emerald Publishing, Why are some scientific papers rejected, July 8, 2020, at 11.00. 7). 3DZ, Roadshow Formlabs Tappa Virtuale, July 9, 2020, 11.00-12.00. 8). Dare valore alla ricerca, “Marie Skłodowska-Curie Actions – Individual Fellowships: opportunità di formazione e sviluppo di carriera”, 10 luglio 2020, 11.00-13.00. 9). 3DZ, La Fabbrica Intelligente nell'era 4.0, 14 luglio 2020. Publications ORCID: https://orcid.org/0000-0001-6044-666X 1). E. V. Arcieri, S. Baragetti, SCC and corrosion fatigue sensitivity of Ti6Al4V alloy, ICSID 2017 Conference. 2). S. Baragetti, E. V. Arcieri, Corrosion fatigue behavior of Ti6Al4V alloy: chemical and mechanical driving forces, International Journal of fatigue 112 (2018) 301-307. 3). E. V. Arcieri, S. Baragetti, M. Fustinoni, S. Lanzini, R. Papalia, Study and modelling of the passenger safety devices of an electric vehicle by finite elements, Procedia Structural Integrity 8 (2018) 212-219. 4). E. V. Arcieri, S. Baragetti, M. Fustinoni, S. Lanzini, R. Papalia, FEM Modelling of Passenger Safety Devices in an Electric Ultra-Light Vehicle, Finalist of Poster Award at CAE Conference, 2017. 5). S. Baragetti, E. Borzini, E. V. Arcieri, Transition from small to large cracks in Ti6Al-4V specimens, Stress-Assisted Corrosion Damage 2018 Conference. 5.

(6) 6). S. Baragetti, E. Borzini, E.V. Arcieri, Bending Fatigue Behavior of 7075Aluminum Alloy, Key Engineering Materials, 774 (2018) 1-6, presented at FDM 2018 Conference. 7). S. Baragetti, E. Borzini, E.V. Arcieri, Effects of environment and stress concentration factor on Ti‐6Al‐4V specimens subjected to quasi‐static loading, Procedia Structural Integrity 12 (2018) 173-182, presented at AIAS 2018 Conference. 8). S. Baragetti, E. Borzini, Ž. Božic, E.V. Arcieri, Quasi-Static Tests on Ti-6Al-4V in Inert Environments and Methanol, presented at ICSID 2018 Conference. 9). S. Baragetti, E. Borzini, Ž. Božic, E.V. Arcieri, Influence of PVD DLC Coatings on 7075-T6 Aluminum alloy fatigue strength, presented at ICSID 2018 Conference. 10). S. Baragetti, E. Borzini, Ž. Božić, E.V. Arcieri, Fracture surfaces of Ti-6Al-4V specimens under quasi-static loading in inert and aggressive environments, Engineering Failure Analysis 103 (2019) 132–143. 11). S. Baragetti, E. Borzini, E. V. Arcieri, Quasi-static crack propagation in Ti-6Al-4V in inert and aggressive media, Corrosion Reviews 37 (2019) 533-538. 12). S. Baragetti, E. Borzini, Ž. Božić, E.V. Arcieri, On the fatigue strength of uncoated and DLC coated 7075-T6 aluminum alloy, Engineering Failure Analysis 102 (2019) 219–225. 13). S. Baragetti, E. Salvador, E.V. Arcieri, A innovative and powerful mobile antiramming system, Finalist of Poster Award at CAE Conference, 2018. 14). S. Baragetti, E.V. Arcieri, Study on a new mobile anti-terror barrier, Procedia Structural Integrity 24 (2019) 91-100, presented at AIAS 2019 Conference. 15). S. Baragetti, E.V. Arcieri, A new mobile anti-ramming system, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) 14, presented at IMECE 2019 Conference. 16). S. Baragetti, E. Borzini, Ž. Božić, E.V. Arcieri, Fracture surfaces of 7075-T6 specimens tested in rotating bending fatigue tests and evaluation of the centrifugal force contribution, presented at ICSID 2019 Conference. 17). S. Baragetti, E. Borzini, Ž. Božić, E.V. Arcieri, Experimental tests and mathematical and numerical models for the impact dynamics: an application for the conception of an anti-terror barrier, presented at ICSID 2019 Conference. 6.

(7) 18). S. Baragetti, E. Borzini, E.V. Arcieri, Rotating bending fatigue tests on uncoated and DLC coated 7075-T6 aluminum alloy, poster submitted to M2D 2020 Conference. 19). S. Baragetti, E. Borzini, E.V. Arcieri, Fracture Surface of a Ti-6Al-4V Specimen with EDM Notches Tested under Quasi-Static Loading in Methanol, Key Engineering Materials 827 (2020) 79-84, presented at FDM 2019 Conference. 20). S. Baragetti, E. Borzini, Ž. Božić, E.V. Arcieri, Stress and fracture surface analysis of uncoated and coated 7075-T6 specimens under the rotating bending fatigue loading, Engineering Failure Analysis, Engineering Failure Analysis 112 (2020) 104512. 21). S. Baragetti, E.V. Arcieri, Study of impact phenomena for the design of a mobile anti-terror barrier: Experiments and finite element analyses, Engineering Failure Analysis 113 (2020) 104564. 22). S. Baragetti, E.V. Arcieri, Effects of thin hard film deposition on fatigue strength of AA7075-T6, Part C: Journal of Mechanical Engineering Science (submitted). 23). E.V. Arcieri, S. Baragetti, Finite element modelling of a truck crashing into a new form of mobile vehicle blocker, IOP Conference Series: Materials Science and Engineering (submitted), presented at AIAS 2020Conference. 24). E.V. Arcieri, S. Baragetti, M. Lavella, Effects of FOD on fatigue strength of 7075T6 hourglass specimens, IOP Conference Series: Materials Science and Engineering (submitted), presented at AIAS 2020 Conference. 25). E.V. Arcieri, S. Baragetti, Fatigue Behavior of Thin Hard Coated Specimens Made of 7075, AIP Proceedings (submitted), presented at FDM Conference 2020. 26). E.V. Arcieri, S. Baragetti, Stress distribution in 7075-T6 hourglass samples subject to FOD (submitted), presented at ICSID 2020 Conference. 7.

(8) Member of the Organizing Commitee 1). ICSID (International Conference on Structural Integrity and Durability), Dubrovnik (Croatia), 2-5 October 2018. 2). ICSID (International Conference on Structural Integrity and Durability), Dubrovnik (Croatia), 4-7 June 2019. 3). ICSID (International Conference on Structural Integrity and Durability), Dubrovnik (Croatia), 15-18 September 2020. Referee for 1). Mathematical Problems in Engineering. 2). ASME 2019 IMECE Conference papers. 3). ASME 2020 IMECE Conference papers. Teaching assistant 1). Finite Element Modelling (a.y. 2018/2019). Tutor 1). Machine Design (a.y. 2019/2020). 2). Machine Design II (a.y. 2017/2018-2018/2019-2019/2020). 3). Finite Element Modelling (a.y. 2017/2018-2018/2019-2019/2020). Subject Expert 1). Machine Design (a.y. 2017/2018, 2018/2019, 2019/2020). 2). Machine Design II (a.y. 2017/2018, 2018/2019, 2019/2020). 3). Finite Element Modelling (a.y. 2017/2018, 2018/2019, 2019/2020). 8.

(9) Co-advisor for the Bachelor’s degree thesis 1). D. Paletta, Taratura macchinario e prove di flessione rotante su provini in lega di alluminio 7075-T6 per la valutazione degli effetti dei rivestimenti PVD, a.y. 2017/2018, supervisor: Prof. Sergio Baragetti. 2). G. Casappa, L. D’Ettorre, Caratterizzazione quasi-statica di provini in Ti6Al4V in ambienti inerti e aggressive, a.y. 2017/2018, supervisor: Prof. Sergio Baragetti. 3). M. Pelucchi, A. Sandrinelli, A. R. Valenti, Resistenza strutturale dopo impatto da FOD per componenti in lega leggera in ambito aeronautico, a.y. 2019/2020, supervisor: Prof. Sergio Baragetti. Co-advisor for the Master’s degree thesis 1). M. Simone, P. Servalli, Progettazione e ottimizzazione di barriere mobili: modelli teorici, numerici e sperimentali, a.y. 2017/2018, supervisor: Prof. Sergio Baragetti. 2). I. Adobati, M. Bonalumi, Analisi teoriche, numeriche e prove sperimentali per la concezione di un innovativo anti-ramming system mobile, a.y. 2017/2018, supervisor: Prof. Sergio Baragetti. 3). D. Rossi, M. Todeschini, Studio dei fenomeni d’impatto per barriere articolate in ambito automotive, a.y. 2017/2018, supervisor: Prof. Sergio Baragetti. 4). L. Ardemagni, S. Prandi, Simulazione FEM di impatti di veicoli pesanti contro barriere anti-sfondamento, a.y. 2017/2018, supervisor: Prof. Sergio Baragetti. 5). F. Locatelli, A. Sala, Modellazione numerica esplicita e implicita di strutture innovative per la sicurezza e il settore nautico: modelli teorici, numerici e riscontri sperimentali, a.y. 2018/2019, supervisor: Prof. Sergio Baragetti. 9.

(10) Other activities 1). 08/2017 – 07/2018 Research Fellow Progettazione strutturale e funzionale avanzata di componenti meccanici, con metodi teorici, numerici e riscontri sperimentali GITT - Centro per la gestione dell'innovazione e del trasferimento tecnologico Università degli Studi di Bergamo. 2). 08/2018 – 07/2020 Research Fellow Analisi del comportamento meccanico di sistemi, macchine, componenti e materiali ad elevato rapporto resistenza-massa Department of Management, information and production engineering Università degli Studi di Bergamo. 3). 08/2020 – 07/2021 Research Fellow (Supporting Talented Researchers Program) Studio teorico, numerico e riscontri sperimentali di sistemi e strutture innovativi in ambito nautico e aeronautico Department of Management, information and production engineering Università degli Studi di Bergamo. 10.

(11) 4). 18/12/2018-15/02/2019 External activity: Progettazione funzionale e costruttiva di componenti nautici e simulazione di fenomeni di impatto Department of Management, information and production engineering Università degli Studi di Bergamo. 5). 01/10/2019-08/11/2019 External activity: Progettazione funzionale e costruttiva di componenti nautici Department of Management, information and production engineering Università degli Studi di Bergamo. Bergamo, 29/09/2020. Emanuele Vincenzo Arcieri (PhD student). Prof. Sergio Baragetti (Tutor). 11.

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

(13) !"#$!% &'()*+,-'.-%-.%/00-/-'%12%&345%6*'78%9.:*;/%<;==;*-% ! 4X!. $/&&/+Y(/!. 654Z! 48355R4X355!. S!. ?!. 64!. $/&&/+Y(/!. 654Z! 453S5R463S5!. 6!. ?!. 68!. $/&&/+Y(/!. 654Z! 48355R4X355!. S!. ?!. 46!. %&&%Y(/!!. 654Z! 453S5R463S5!. 6!. ?!. 4[!. %&&%Y(/!!. 654Z! 48355R4X355!. S!. ?!. 47!. %&&%Y(/!!. 654Z! 453S5R463S5!. 6!. ?!. 66!. %&&%Y(/!!. 654Z! 48355R4X355!. S!. ?!. 6T!. %&&%Y(/!!. 654Z! 453S5R4S3S5!. S!. ?!. 67!. %&&%Y(/!!. 654Z! 48355R4X355!. S!. ?!. 5[!. -%B/+Y(/!. 654Z! 48355R4X355!. S!. ?!. 5X!. -%B/+Y(/!. 654Z! 48355R4X355!. S!. ?!. 57!. -%B/+Y(/!. 654Z! 453S5R463S5!. 6!. ?!. 46!. -%B/+Y(/!. 654Z! 48355R4X355!. S!. ?!. 4T!. -%B/+Y(/!. 654Z! 453S5R463S5!. 6!. ?!. 6S!. -%B/+Y(/!. 654Z! 453S5R463S5!. 6!. ?!. S5!. -%B/+Y(/!. 654Z! 453S5R463S5!. 6!. ?!. 5X!. <)'/+Y(/!. 654Z! 453S5R463S5!. 6!. ?!. 48!. <)'/+Y(/!. 654Z! 453S5R463S5!. 6!. ?!. !. !. !. !. !. !. >\>2]*!!. !. !. !. !. 8[!. ?!. ! *+,-./#/!0)-'/-1%!2(')/()!. ! ! 0)$&%! V(%O3!2-<(/,!J/##/()! WWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW! !.

(14)

(15)

(16)

(17)

(18)

(19) Società Scientifica Italiana di Progettazione Meccanica e Costruzione di Macchine. PhD Summer School AIAS. certificate of participation to EMANUELE VINCENZO ARCIERI For his active participation during the Ph.D course. !"#!$%&'()$(&*+&,)-&$.!/( -&.01"' 15-18 June 2020 AIAS proposes that 5 credits will be recognized to the participants (course of about 20 hours with final test).. For AIAS Prof.ssa Ing. Laura Vergani.

(20)

(21)

(22) 33rd INTERNATIONAL CAE CONFERENCE AND EXHIBITION. CERTIFICATE OF PARTICIPATION This is to certify that:. Emanuele Vincenzo Arcieri has participated in. INTERNATIONAL CAE CONFERENCE AND EXHIBITION 2017 AND IS ONE FINALIST OF POSTER AWARD 2017 6 ber vem No 2017. CAE INTERNATIONAL. POSTER AWARD. Stefano Odorizzi EnginSoft CEO. 2017 6 - 7 November Vicenza Convention Centre @Fiera di Vicenza. Vicenza, Italy SIMULATION: THE SOUL OF INDUSTRY 4.0.

(23) CERTIFICATE OF PARTICIPATION. Emanuele Vincenzo Arcieri University of Bergamo Italy. Stress-Assisted Corrosion Damage V July 15 - 20, 2018 Hernstein, Austria Oral Presentation. Transition from small to large cracks in Ti-6Al4V specimens. Barbara Hickernell Executive Director.

(24)

(25) . ATTESTATO DI PARTECIPAZIONE Si attesta che il sig Emanuele Vincenzo Arcieri . ha partecipato al 47° Convegno Nazionale AIAS tenutosi a Villa San Giovanni (RC) nei giorni 5-8 settembre 2018 Comitato organizzatore e Consiglio Scientifico AIAS Prof͘ Luigi Bruno.

(26)

(27) 34th INTERNATIONAL CAE CONFERENCE AND EXHIBITION. CERTIFICATE OF PARTICIPATION This is to certify that:. Emanuele Vincenzo Arcieri has participated in. INTERNATIONAL CAE CONFERENCE AND EXHIBITION 2018 AND IS ONE FINALIST OF POSTER AWARD 2018 8 er ob Oct 018 2. CAE INTERNATIONAL. POSTER AWARD. Stefano Odorizzi EnginSoft CEO. 2018 8 - 9 OCTOBER Vicenza Convention Centre @Fiera di Vicenza. Vicenza, ITALY EVOLVING ENGINEERING SIMULATION: THE AGE OF THE DIGITAL TWIN.

(28)

(29) % % ?<?7>1 D1<I ?<?7> ?< ?7>1 ?7> 1 D1<II 1 . >49>1<9->5:9-7:921<19/1:9 >49 9>1 9 >1<9 >1 <9-> <9 ->5: -> 5:9-7:921<19/1 5:95: 9-7 97:921<19/1 7 /1: /1 :9 :. !'%'+%'+ !' %' '+ %'+ . % % ?<?7>1 D1<I ?<?7> ?< ?7>1 D1<II ?7>. :7:39->-7C

(30) &1;>18.1< :7:39 39- 39 ->-7 - -7C -7 C

(31)

(32) &1;>18 18.1 18 .1< .1 . >49>1<9->5:9-7:921<19/1. !&! '%&!&! :7:39->-7C

(33) &1;>18.1< . . . . . 9=>5>?>5:9-7&;:9=:<= (95@1<=5>C:2:7:39-E(95@1<=5>C:2#:<>:E#'E(95@1<=5>C:2':<:9>:E (%& E& E+ 'E "E&.

(34) B1495>DIDDB9E= =?<I241D5C3?1D9>7C?> ?H945 =?<I245>E= 3?=@?C9D5C *1B41>I1> !I;DI25;?F'" 1<IC85F'(!9<59;?. . . . >49>1<9->5:9-7:921<19/1:9. !&! '%&! &!. &56 . ")!& " -'' #(" )"# &"#&!"( '(&)()&#"( -"!'(&"( ##!$#'( - "& ' ' "9;?<1I2B?C9=?F "145J841"?F?C5<DC5F1 :7:39->-7C

(35) &1;>18.1< B1>35C3?5<<C?<11>4 5?>947E=>?F. . "#*

(36) !&#'(&)()& ##, & !# -")! &56 !(&,#!$#'(' '""('('#!7' >4B5G?<389>"5<<I #& &,(#&$&#'('' $B?;?@5>;?#<71 !1B91&9385DD1<5CC1>4B1*1B?>5&?25BD? '81;8<5F938 !?>D1>1B9!1B3?5331B5<<91>4*9>35>J?=2B?79 *I1385C<1F &56 $B?;?@5>;?'5B759 1<IC85F!1H9= (#!$#'(!(& $&#$&(' "9;?>?F9381>4'5B759 $$ "("# # '-'(!!" !9<59;? (## [)(("(## [+#&$" " -''#"&-'*" &56 .EJ1>1!EB39>;?F11>41B?<*1C9<;? B1495>DIDDB9E= &56 =?<I241D5C3?1D9>7C?> ?H945 =?<I245>E= '((" -''#(&*'(# 3?=@?C9D5C !") &#, *1B41>I1> (?=1C$5DB !I;DI25;?F'" 1<IC85F'(!9<59;?. . . &56

(37) . . &56. . (&!"'#" * )(#"# -7725<=>27::<935911<593&/4::7 #"&'%&&&"! &#"'(&)(#"# &()& (! $ * (#)"''# #&"'#& .&#"#, &56

(38) &56 &!'')( #!" " )"#&"'.'(&)(#"#" !(#'(##("(&!# (&## & !# " (#+'$ ((" (!" *#)&#(9["2 #-' $&#$&('"$&#&!"* )(#" $1?<1)<1391<?B5C E3I #" '"&(#& *<149=9B';B9@>I1;*<149=9B*';B9@>I1;1>4 9<25BD1>4&?C19B5 !9;819<B5=9>1>4 F75>9I1';B9@>I1; ?M?5BB1J$54B?$59H?D?1>4'T>91$9>D? !?>7B19> F75>995BIE79> . &56 . &56. !')&"!" #'''#$'(#" (!$#&("#'(&(""&&( #!)'(#"""-'$"""( "")&" ( *&#)'+#&"$&'')&'""" >D?>91>;?GC;9$1G5g'DprI3;91>4>4BJ5:qI<E; - "&' &56 &145;$B?38KJ;11>4<5i9DDB938 ")!& " -'' &56

(39) &56 #(" )"# &"#&!"( &#(("""()('('#" * )(#"#"(&#"#,'!''#"" '(&)()&#"( (#!)'(#"#+(&") )"#(" #( ( -"!'(&"( !&#!) '#" )!")! #- ##!$#'( '5B79?1B175DD9=1>E5<5?BJ9>91>4=1>E5<5 >4BJ5:qI<E;$1G5g'DprI3;91>4>D?>91>;?GC;9 - "& ' ' *9>35>J?B395B9 "9;?<1I2B?C9=?F &56 &56 &56 "145J841"?F?C5<DC5F1 +""$#'(#"!(##(* (!" *#&#!"')! B1>35C3?5<<C?<11>4" -''##&'"(&-. &"" !")()&"#&&(#"# #-('(&"&('"( !#)"("&! 5?>947E=>?F )"(#" - "& $&(' (!$&()&&"&#!

(40) (# $1G5g'DprI3;91>4>D?>91>;?GC;9 (?C89D1;5(1D5>??;99=2?1>4!9DCE89B??C1;1 *<149=9B*';B9@>I1;*<149=9B';B9@>I1;1>4 F75>9I1';B9@>I1;.

(41) . #"&'%&&&"! . -7725<=>27::<935911<593&/4::7. &56

(42) . &56 . "+'"#&!"( *((#" '-'(!+(#&.#"( !#*!"( &56 &931B4?!191$54B?$59H?D?1>4'T>91$9>D? '""('('#!7' #& &,(#&$&#'('' !1B91&9385DD1<5CC1>4B1*1B?>5&?25BD? !?>D1>1B9!1B3?5331B5<<91>4*9>35>J?=2B?79. (##("# '(&(#( ' ""#"!''#"' &56

(43) &56 <5i9DDB938$1F5<B1253?C56$?@5<;11>4 5<5CDk>'38?<J " )"#&"'.'(&)(#"#" !(#'(##("(&!# (&## & (!" *#)&#(9["2 #-' $&#$&('"$&#&!"* )(#" *<149=9B';B9@>I1;*<149=9B*';B9@>I1;1>4 '"&(#& F75>9I1';B9@>I1; ?M?5BB1J$54B?$59H?D?1>4'T>91$9>D?. . &56 . &56 . (#!$#'(!(& $&#$&(' $$ "("# # '-'(!!" (##

(44) [)(("(## [+#&$" " -''#"&-'*" .EJ1>1!EB39>;?F11>41B?<*1C9<;?. !')&"!" #'''#$'(#" #!)'(#"""-'$"""( *&#)'+#&"$&'')&'""" *" !!% - "&' &145;$B?38KJ;11>4<5i9DDB938. (!$#&("#'(&(""&&( "")&" ( '1<<-/1:2935911<593&/4::7 >D?>91>;?GC;9$1G5g'DprI3;91>4>4BJ5:qI<E;. &56 . &56

(45) . &56. '((" -''#(&*'(# !") &#, (?=1C$5DB. &#(("""()('('#" )"#(" #( ( )!")! #- '5B79?1B175DD9=1>E5<5?BJ9>91>4=1>E5<5 *9>35>J?B395B9. * )(#"#"(&#"#,'!''#"" (#!)'(#"#+(&") !&#!) '#" >4BJ5:qI<E;$1G5g'DprI3;91>4>D?>91>;?GC;9 &56. &56. &56. &56 . +""$#'(#"!(##(* !")()&"#&&(#"# )"(#" - "& $&(' (?C89D1;5(1D5>??;99=2?1>4!9DCE89B??C1;1. (!" *#&#!"')! " -''##&'"(&-. &"" #-('(&"&('"( !#)"("&! (!$&()&&"&#!

(46) (# $1G5g'DprI3;91>4>D?>91>;?GC;9 *<149=9B*';B9@>I1;*<149=9B';B9@>I1;1>4 F75>9I1';B9@>I1;. &56

(47) . &56 . . "+'"#&!"( *((#" '-'(!+(#&.#"( !#*!"( &931B4?!191$54B?$59H?D?1>4'T>91$9>D?. (##("# '(&(#( ' ""#"!''#"' <5i9DDB938$1F5<B1253?C56$?@5<;11>4 5<5CDk>'38?<J. . .

(48) . . *" !!%. - 9 -. . '1<<-/1:2935911<593&/4::7.

(49) Società Scientifica Italiana di Progettazione Meccanica e Costruzione di Macchine. ATTESTATO DI PARTECIPAZIONE Con la presente si certifica che. ha partecipato ai lavori del 48° Convegno Nazionale AIAS. In riconoscimento della sua partecipazione attiva e preziosa durante lo svolgimento delle tre giornate di lavoro del 48° Convegno Nazionale AIAS tenutosi ad Assisi (PG).. Prof. Franco Furgiuele Presidente AIAS. ©AIAS-Associazione Italiana Analisi delle Sollecitazioni Sede amministrativa: Sede legale: c/o Dipartimento DIMEG, Via Alfonso Rendano 18, 0199 Roma Università della Calabria, Via P. Bucci C.F. 95104900246 1,44C 44122 TEL. +39-0532.974821, FAX +39-0532.974870 C. F. 02382000582 - 87036Ferrara, Rende (CS) - Italia. Contatti: [email protected] www.aiasnet.it.

(50) 1. 18th. International Conference on. Fracture and Damage Mechanics 16-18th September 2019 Rodos, Greece 1999 London. 2001 Milan. 2005 2003 Paderborn Mallroca. 2011 Dubrovnik. 2012 Xian. 2013 Sardinia. 2014 Ponta Delgada. 2006 Harbin. 2015 Budva. 2007 Madeira. 2016 Alicante. 2008 Seoul. 2010 2009 St George’s Nagasaki Bay. 2017 Florence. 2018 Seville. Organisers Professor A. S. Paipetis Dept. of Materials Science & Engineering University of Ioannina 45110 Ioannina, Greece Tel: +30 26510 08001, +30 26510 09024 Fax: +30 26510 08054 email: [email protected] http://csmlab.materials.uoi.gr Professor Ferri Aliabadi Department of Aeronautics Imperial College, London Prince Consort Road, South Kensington London, SW7 2BY [email protected]. 15 September 2019. To Whom It May Concern This is to confirm that Mr Emanuele Vincenzo Arcieri has participated in the conference and presented a paper entitled “Fracture surface of a Ti-6Al-4V specimen with EDM notches tested under quasi-static loading in methanol” by Sergio Baragetti, Emanuele Borzini and Emanuele Vincenzo Arcieri. Yours sincerely,. Professor Ferri Aliabadi On behalf of the organising committee. Steering Committee: M.H.Aliabadi, B. Abersek, J.K.Kim , M Guagliano S-I.Nishida, S.W.Shin Hanyang Qingfen Li.

(51)

(52) ! ". # $. % ). ' ' (%. '$. "". $( %. &. $ &. &. "! % ) "*. ). !. $. $. , -. ! + !.. -. %. ! '# $. * $(+ , # $. #$$. %. ' , ( '/. . 0(. 1 ' $. ' $ ' ( '. '. '% '* 3 ( ! / ' ! ' ' 5. '. '. ( '. ' " ' '* 0. ( ' '. !. '. ' $ (. %. '! %' '%. ' !. 2 ! ' ' $ ' " '* & / ' ' ' ( ' ' ! ( ' ( '* ' 4 ' / ' ' ' 5 ( ' ' ' ! ( ' '* 0 ' ' ' $ ( ' ( ' ' ' ' $ ' ' ' 5 ' ' " ' ' %( 1 5 " ' * 3 % ( ' ' ' $ ! 2 ! ( '*. $ $( /,.. ). $ "" /' $ $ " $. !. 6. " ". $ *. +. * *.* -. !. 7 !" #. $. % &'. '. ( "' '. ))) " #. * ' +%. ,. -.. / 012 -.- ,. -.. ( *.

(53) ATTESTATO DI FREQUENZA E PARTECIPAZIONE. Si attesta che Emanulele Vincenzo Arcieri, iscritto al corso di Dottorato ‘Technology, Innovation and Management’, Tutor: Prof. Baragetti, ha partecipato al seguente seminario+workshop presso l’Università degli Studi di Bergamo tenuto dal Prof. Bernhard Weigand, nell’ambito del progetto DROPIT in collaborazione con Universität Stuttgart: Understanding Dimensional Analysis, Part 1, 14 Marzo 2018, h. 9-12 Understanding Dimensional Analysis, workshop, 14 Marzo 2018, h. 13:30-15:30. Dalmine, 15 Marzo 2018. Prof. G.E. Cossali. 24044 Dalmine (BG), viale Marconi 5 tel. 035 2052 327/334 fax 035 2052 077 e-mail: [email protected] Università degli Studi di Bergamo www.unibg.it Cod. Fiscale 80004350163 P.IVA 01612800167.

(54)

(55) ATTESTATO DI FREQUENZA E PARTECIPAZIONE. Si attesta che Emanulele Vincenzo Arcieri, iscritto al corso di Dottorato ‘Technology, Innovation and Management’, Tutor: Prof. Baragetti, ha partecipato al seguente seminario presso l’Università degli Studi di Bergamo tenuto dalla Prof. Prof. Dorthe Wildenschild Della Oregon State University, nell’ambito del progetto DROPIT in collaborazione con Universität Stuttgart: Measuring micron-scale characteristics of materials, fluids, and interfaces in porous media: Applications in environmental engineering, 17 Settembre 2018, h. 11:000-12:00. Dalmine, 24 Settembre 2018. Prof. G.E. Cossali. 24044 Dalmine (BG), viale Marconi 5 tel. 035 2052 327/334 fax 035 2052 077 e-mail: [email protected] Università degli Studi di Bergamo www.unibg.it Cod. Fiscale 80004350163 P.IVA 01612800167.

(56) ATTESTATO DI PARTECIPAZIONE Si certifica che. Emanuele Vincenzo Arcieri ha partecipato al webinar online:. “Ansys Campus | Meccanica” tenutosi in data 5 Maggio 2020 (14.30 – 15.00). Trento, 5 Maggio 2020. Il docente Fabio Rossetti.

(57) 24th of June 2020. To whom it may concern. CERTIFICATE OF ATTENDANCE. This certificate is presented to Emanuele Vincenzo Arcieri, PhD student in Technology, Innovation and Management (TIM) at the University of Bergamo, for attending the following webinar:. “Full and Reduced Order Modelling for Digital Twinning with Applications to Damage Detection” offered by Dr. Konstantinos Agathos, Dept. of Civil, Environmental and Geomatic Engineering, ETH Zurich, on 12th of June 2020 (3:00 - 4:00 pm), within the course of Computational Mechanics of Solids and Structures, School of Engineering, Dalmine.. Rosalba Ferrari. viale Marconi, 5 I-24044 Dalmine (BG) ITALY Tel: +39.035.205.2379 Cell: +39.338.280.6840 Fax: +39.035.205.2310 http://www.unibg.it.

(58) ATTESTATO DI PARTECIPAZIONE Con il presente attestato si certifica che il Dott. Emanuele Vincenzo Arcieri, Dipartimento di Ingegneria Gestionale, dell'Informazione e della Produzione, Università degli Studi di Bergamo, ha partecipato al seminario dal titolo “Introduzione di MIDAS FEA NX: modellazione geometrica, tecniche di meshatura, impostazione di analisi”, tenuto per via telematica dall’ Ing. Carlo Tuzza, Responsabile Supporto Tecnico CspFea, il giorno 23 giugno 2020 dalle ore 15:00 alle ore 18:00. Il seminario è stato organizzato nell’ambito del programma di studi del corso di Dottorato in Ingegneria Strutturale e Geotecnica dell’Università Sapienza di Roma.. Il Coordinatore del Dottorato di Ingegneria Strutturale e Geotecnica,. Il Segretario. Prof. Patrizia Trovalusci. Dr. Andrea Arena. Roma, 25 giugno 2020. WEB SITE PhD Program in Structural and Geotechnical Engineering – [email protected] Director Prof. Patrizia Trovalusci, Full Professor of Solids and Structural Mechanics – [email protected] dr. Andrea Arena on behalf of the Coordinating Committee, Assistant Professor of Structural Mechanics and Dynamics – [email protected].

(59)

(60) Attestato di partecipazione al corso online «MARIE SKLODOWSKA-CURIE ACTIONS: OPPORTUNITÀ DI FORMAZIONE E SVILUPPO DI CARRIERA PER RICERCATORI E RICERCATRICI». Data 10 Luglio 2020 tot.: 2 ore. EMANUELE VINCENZO ARCIERI IL DIRETTORE. APRE – Agenzia per la Promozione della Ricerca Europea Via Cavour, 71 00184 Roma www.apre.it.

(61)

(62)

(63)

(64) Società Scientifica Italiana di Progettazione Meccanica e Costruzione di Macchine. ATTESTATO DI PARTECIPAZIONE Con la presente si certifica che. EMANUELE VINCENZO ARCIERI ha partecipato ai lavori del 49° Convegno Nazionale AIAS (virtual). In riconoscimento della sua partecipazione attiva e preziosa durante lo svolgimento delle tre giornate di lavoro del 49° Convegno Nazionale AIAS tenutosi in modalità virtuale a causa dell’emergenza COVID19.. Prof. Franco Furgiuele Presidente AIAS. ©AIAS-Associazione Italiana Analisi delle Sollecitazioni Sede amministrativa: c/o Dipartimento DIMEG, Università della Calabria, Via P. Bucci 1,44C 44122 TEL. +39-0532.974821, - 87036Ferrara, Rende (CS) - Italia. Sede legale: Via Alfonso Rendano 18, 0199 Roma C.F. 95104900246. FAX +39-0532.974870 C. F. 02382000582. Contatti: [email protected] www.aiasnet.it.

(65) 1. 19h. International Conference on. Fracture and Damage Mechanics 15-17th September 2020. 1999 London. 2011 Dubrovnik. 2001 Milan. 2012 Xian. 2003 2005 Paderborn Mallroca. 2013 Sardinia. 2014 Ponta Delgada. 2006 Harbin. 2015 Budva. 2007 Madeira. 2016 Alicante. 2008 Seoul. 2010 2009 St George’s Nagasaki Bay. 2018 2017 Florence Seville Organisers. Professor Ferri Aliabadi Department of Aeronautics Imperial College, London Prince Consort Road, South Kensington London, SW7 2BY [email protected] Professor Luis Rodriguez-Tembleque Universidad de Sevilla, Dpto. Escuela Técnica Superior de Ingeniería, Sevilla. 15 September 2020. This is certify that Emanuele Vincenzo Arcieri has participated and presented a paper at the 19th International Conference on Fracture and Damage Mechanics, 15-17th September 2020.. Professor Ferri M H Aliabadi Conference Chairman. Steering Committee: M.H.Aliabadi, B. Abersek, J.K.Kim , M Guagliano S-I.Nishida, S.W.Shin Hanyang Qingfen Li.

(66)

(67)

(68)