Sommario Titolo della tesi: ANALISI DI CRITICITA’ MEDIANTE EQUIPMENT RANKING
NEL PROCESSO DI INFORMATIZZAZIONE DELLA MANUTENZIONE IN LUCART.
Sommario: L’obiettivo di questa tesi è l’implementazione di un sistema informatico per la
gestione della manutenzione, denominato CMMS, in un’azienda del settore cartario. Un software CMMS tiene traccia della storia di ogni equipaggiamento, di quello che gli è capitato, dei guasti, dei tempi di riparazione, di quanto un guasto abbia inciso sulla produzione, della frequenza con cui un certo equipaggiamento si guasta, di eventuali problemi di sicurezza che un certo guasto abbia prodotto. Il software è in grado di fornire dei report che contengano tali informazioni. A partire da tali report è stata eseguita un’analisi di criticità su una parte di impianto ritenuta dai responsabili di manutenzione critica all’interno del processo produttivo.
L’analisi di criticità è stata svolta sulla sede tecnica di macchina continua di macchina 3 secondo il modello di Equipment Ranking, caratterizzato da un approccio qualitativo basato su tabelle. Ciò ha permesso di valutare i rank di criticità dei vari equipment analizzati, e di ridefinire per ognuno di essi le politiche manutentive in base ai risultati del modello. Il lavoro è stato svolto presso l’azienda Lucart – Cartiera Lucchese s.p.a. , all’interno dello stabilimento di Porcari (LU).
Thesis title: CRITICALITY ANALISYS THROUGH EQUIPMENT RANKING IN THE
MAINTENANCE INFORMATIZATION PROCESS IN LUCART.
Abstract: The objective of this thesis is the implementation of a data processing system
for maintenance management, called CMMS, in a papermaking industry. A CMMS software books the story of every equipment, of what has happened to it, of failures, of time to repair, of failure effect on production process, of failure frequency of every equipment, of possible safety problems owing to a failure. The software can provide reports containing this kind of informations. From this reports, a criticality analisys has been executed about a plant part believed critical by maintenance superintendents.
The criticality analisys has been developed on technical station of PM3 unbroken machine, through Equipment Ranking model, characterized by a qualitative approach based on schedules. This has allowed to estimate criticality ranks of analysed equipments, and to define again for everyone maintenance policies on the grounds of model results. The work has been carried on in the plant of Porcari (LU) for the group Lucart - Cartiera Lucchese s.p.a.