University of Udine DEPARTMENT OF ELECTRICAL MANAGEMENT AND MECHANICAL ENGINEERING Ph.D. Programme in Industrial and Information Engineering XVIII Cycle

In particularly we state a framework for risk assessment of an electric power grid to identify most vulnerable sensors susceptible to FDIA in a context of long-term op- eration of

The penetration of wind energy in the grid raises questions about the compatibility of the wind turbine power production with the grid ,in particular the behavior of the turbines

The optimal flowsheet of a biorefinery with hardwood feedstock, obtained by maximizing the Net Present Value, yields comparable biomass allocation to levulinic acid

Conventional micronization techniques, such as jet milling, spray drying, liquid antisolvent precipitation and solvent evaporation are sometimes not suitable, since the

The mathematical model considered as the start point had the following features: 1D, axi-symmetric, time-invariant cylindrical geometry; homogeneous and isotropic material; no

Dal confronto delle varie previsioni del modello con i dati sperimentali originati da test esterni di stagionatura su scala industriale, è stato possibile dedurre che

questa parte della tesi di dottorato è stato infatti proposto un nuovo processo assistito da fluidi supercritici per la produzione di nanoparticelle in sospensione acquosa, chiamato

Lo stampaggio ad iniezione di schiume utilizza agenti espandenti fisici in condizioni di alta pressione e temperatura per ottenere pezzi stampati aventi un