A - 34
Bibliografia
[1] H. Trey, “Review of Current Design And Analysis Procedures Review of
Approaches on Equivalent Initial Flaw Concept and Short Crack Growth”, “Advanced Design Concepts and Maintenance by Integrated Risk Evaluation for Aerostructures”, EADS Airbus GmbH
[2] I.F.C. Smith, “Applying Fatigue Research to engineerin Design”, “The
Behaviour of Short Faatigue Cracks”, EGF publication 1, Miller K.J. and
De Los Rios E. R. Editors, 1986
[3] Schijve J. “The practical and theoretical significance of small cracks, an
evaluation”, ICAF Doc. N. 1444, Technische Hogelschool Delft, 1984
[4] R.O. Ritchie, “The Importance of Small Fatigue Cracks in Advanced
Materials”, “Small Craks: Mechanics, Mechanisms and Applications”,
K.S. Ravichadran R.O. Ritchie and Y. Murakami Editors, Elsevier Science Ltd., 1999
[5] Autori Vari, “Short Cracks Growth Behaviour in an Alluminium Alloy”, An AGARD Cooperative Test Programme, 1982
[6] R. Galatolo L. Lazzeri, “Significance of Short Fatigue Cracks for Aircraft
and Crack Growth Data for 2024 T3 Aluminium Alloy”, Atti del
Dipoartimento di Ingegneria Aerospaziale, Università degli Studi di Pisa, Marzo 1996
A - 35 [7] J.W. Hutchinson, “Singular Behaviour at the End of a Tensile Crack in a
Hardening Material”, J. Mech. Phys. Solids 16, 1968
[8] J.R. Rice, “Mathematical Anlalysis in the Mechanics of Fracture”,
“Fracture: An Advanced Treatise”, 1968
[9] J.R. Rice, “A Path Indipendent Integral and the Approssimmate Analysis of
Strain Concentration by Notches and Cracks”, J. Appl. Mech. 35, 1968
[10] N.E. Dowling, “Geometry Effects and the J-integral Approach to
Eleastic-Plastic Fatigue Crack Growth”, Crack and Fracture, ASTM STP 601,
1976
[11] N.E. Dowling, J.A. Begley, “Fatigue Crack Growth During Gross
Plasticity And the J-integral”, Mechanics of Crack Growth, ASTM STP
590, 1976
[12] W.L. Morris, M.R. James & O. Buck, “A Simple Model of Stress Intensityv
Range Threshold and Crack Closure Stress”, Eng. Fract. Mech. 14, 1968
[13] J.C. Newman, Jr, “Fracture Mechanics Parameters for Small Fatigue
Cracks”, “Small-Cracks Test Methods”, Larsen J. M. And Allison E.
Editors, ASTM Publication, Philadelphia, 1992
[14] R. Galatolo, G. Longo, “L’analisi dell’immagine nella sperimentazione a
fatica”, XII Congresso Nazionale dell’Associazione Italiana di
A - 36 [15] R. Galatolo, “Misurazione di fessure per fatica con la tecnica di analisi
dell’immagine”, XIII Congresso Nazionale dell’Associazione Italiana di
Aeronautica e Astronautica, Atti pp. 1211-1223, Roma 11-15 Settembre 1995
[16] R. Galatolo, G. Longo, “Programma di Calcolo MVP-CARD: Acquisizione
ed Elaborazione di Immagini, Manuale d’Uso e Manuale del Programmatore” MDIA 93-1, Università degli Studi di Pisa, Edizioni
ETS, 1993
[17] R. Galatolo, “Fatigue and Fracture Crack Measurement by the Amage
Analysis Technique”, Fatigue 2002 – Eighth International Fatigue
Congress – Stockholm 3-7 June 2002, vol. 4, pp. 2611-2620, Stoccolma (Svezia), 2002
[18] R. Galatolo, C. Rossi, “Studio di Short Cracks con la Tecnica di Analisi
dell’Immagine”, XIV Congresso AIDAA, Associazione Italiana di
Aeronautica e Astronautica, vol. III, pp. 109-, Napoli 1997
[19] Mary H Swain, “Monitoring Small-Crack Growth by the Replication
Method”, “Small-Cracks Test Methods”, Larsen J. M. And Allison E.
Editors, ASTM Publication, Philadelphia, 1992
[20] James M. Larsen, “Measurement of Small Crack by Photomicroscopy:
EXperimets and Analysis”, “Small-Cracks Test Methods”, Larsen J. M.
A - 37 [21] Richard P. Gangloff, Donald C. Slavik, Robert S. Piascik, Robert H. Van Stone, “Direct Current Electrical Potential Measurement of Growth of
Small Cracks”, “Small-Cracks Test Methods”, Larsen J. M. And Allison
E. Editors, ASTM Publication, Philadelphia, 1992
[22] Michael T. Resch, Drew V. Nelson, “An Ultrasonic Method for
Measurement of Size and Opening Behavior of Small Fatigue Cracks” , “Small-Cracks Test Methods”, Larsen J. M. And Allison E. Editors,
ASTM Publication, Philadelphia, 1992
[23] William N. Sharpe, “Real-Time Measurement of Small Crack Opening
Behavior Using an Interferometric Strain/Displacement Gage”, “Small-Cracks Test Methods”, Larsen J. M. And Allison E. Editors, ASTM
Publication, Philadelphia, 1992
[24] American Society for Metals, “Electropolishing”, Metals Handbook [25] G. F. Vander Voort, “Metallography, Principles and Practice”,
McGraw-Hill Book Company, Inc, New York, 1984
[26] Mc Graw-Hill, “Dizionario enciclopedico scientifico”, Zanichelli, 1991. [27] R. K. J. E. King, “Comparison of Long and Short Fatigue Crack Growth in
a High Strength Aluminium Alloy”, “The Behaviour of Short Fatigue Cracks”, EGF Publication 1, Miller K. J. and De Los Rios E. R. Editors,
