– “Kinetics of Sulfur Vulcanization of NR, BR, SBR and Their Blends Using a Rheometer and DSC”, Journal of Applied Polymer Science, 1996  Ciardelli F., Farina M., Giusti P., Cesia S



 Adriaan S.L. – “A Differential Scanning Calorimetric Study of the Interaction of Zinc

Benzothiazole-2-Thiolate, Sulfur, Stearic Acid and Zinc Stearate in the Absence and Presence of Polyisoprene”, Journal of Applied Polymer Science, 1993

 Alonso M.V., Oliet M., Garcia J., Rodriguez F., Echeverria J. – “Gelation and isoconversional

kinetic analysis of lignin-phenol-formaldehyde resol resins cure”, Chemical Engineering Journal, 2006

 Arrillaga A., Zaldua A.M., Atxurra R.M., Farid A.S. – “Techniques used for determining cure

kinetics of rubber compounds”, European Polymer Journal, Agosto 2007

 ASTM D 3616-95 – “Standard Test Method for Rubber, Raw-Determination of Gel, Swelling

Index and Dilute Solution Viscosity”, Aprile 1995

 Baiardo Massimo – “Caratterizzazione reologica di materiali termoplastici”, TA Instruments, Agemont, 2006

 Barni Emanuele – “Proprietà meccaniche di mescole modello per riciclo di pneumatici”, Tesi di Laurea, Università di Pisa, Corso di Laurea in Ingegneria Chimica, Dicembre 2007

 Butta E. – “Gli elastomeri e le gomme vulcanizzate: proprietà”, Università di Pisa, Dipartimento di Ingegneria Chimica, 1968-69

 Cadenato A., Morancho J.M., Fernandez-Francos X., Salla J.M., Ramis X. – “Comparative

Kinetic Study of the Non-isothermal Thermal Curing of bis-GMA/TEGDMA Systems”, Journal of Thermal Analysis and Calorimetry, 2007

 Carberry J.J. – “Chemical and Catalytic Reaction Engineering”, McGraw-Hill Inc., 1976

 Chandra A.K., Mandal T., Roy B.K., Mohamed P.K. – “A new approach to optimize cure cycle of a tire using DSC”, Rubber World, Settembre 2006

 Chiappini Andrea – “Valutazione di metodi per la devulcanizzazione di mescole Stirene –

Butadiene”, Tesi di Laurea, Università di Pisa, Corso di Laurea in Ingegneria Chimica, Ottobre 2007

 Chough S.H., Chang D.H. – “Kinetics of Sulfur Vulcanization of NR, BR, SBR and Their Blends Using a Rheometer and DSC”, Journal of Applied Polymer Science, 1996

 Ciardelli F., Farina M., Giusti P., Cesia S. – “Macromolecole Scienza e Tecnologia” vol I, Pacini Editore Pisa, 1992

 Ciardelli F., Crescenti V., Pezzin G., Peggion E. – “Macromolecole Scienza e Tecnologia” vol II, Pacini Editore Pisa, 1986

 Coran AY. – “A model and treatment for scorch delay kinetics”. Rubber Chem Technol1964

 Danès F., Garnier B. Evaluation de l’erreur due au transfert de chaleur lors des measures

cinétiques dans les polymers par calorimétrie differentielle à balayage en mode isotherme” , International Journak of Thermal Science, 2003

 Ding R., Leonov A.I. – “A Kinetic Model for Sulfur Accelerated Vulcanization of a Natural Rubber Compound”, Journal of Applied Polymer Science, 1996

 Fan RL, Zhang Y, Huang C, Gong P, Zhang Y. – “Simulation and verification for sulphur

accelerated vulcanisation of gum natural rubber compound”. Rubber Chem Technol, 2002

 Galimberti M. – “Gomma naturale”, “Il nero”, “I principali elastomeri naturali e loro

caratteristiche”, “Elastomeri sintetici: Isoprene”, “Gomma butile”, “Elastomeri sintetici:

Polibutadiene”, “Elastomeri termoplastici: TPE”, “Vulcanizzazione con zolfo e con acceleranti”, Università degli Studi di Modena e Reggio Emilia, 2005

 Garnier B., Danes F. – “Measurement of thermodynamic features of rubber vulcanization by isothermal DSC”, Laboratorio di termocinetica, Francia, 1998

 Grigoryeva O.P., Fainleb A., Tolstov A., Starostenko O. – “Structure-property relationships for

reactively compatibilized thermoplatic elastomers from recycled polyolefins and rubbers”, Nonlinear Optics, Quantum Optics (Old City Publishing), 2004

 Han I.S, Chung CB, Lee JW. – “Optimal curing of rubber compounds with reversion type cure behaviour”. Rubber Chem Technol, 2000

 Heuvel H.M, Lind K.C.J.B. “Computerized analysys and correction of differential scanning

calorimetric data for effects due to thermal lag and heat capacities changes”, Analytical Chemistry, 1970

 Hohne G, Hemminger W. “Differential Scanning Calorimeter: An Introduction for Practitioners, Springer, Berlin, 1996.

 Isayev A.I., Sujan B. – “Nonisothermal Vulcanization of Devulcanized GRT with Reversion Type Behavior”, Journal of Elastomers and Plastics, Ottobre 2006

 Jonsson K., Flodin P. – “Vulcanization of Rubber. Kinetic Parameters for SBR and Simulations of Vulcanization in a Mold”, Journal of Applied Polymer Science, 1991

 Jurkowski B., Koczorowska E., Goraczko W., Manuszak J. – “Radioisotopic Determination

Methods of Sulfur Dispersion and Sulfur Blooming in Rubber Compounds”, Journal of Applied Polymer Science, 1996

 Kissinger H.E. – “Reaction Kinetics in Differential Thermal Analysis”, Analytical Chemistry, National Bureau of Standards, Washington D.C., Novembre 1957

 Koczorowska E., Jurkowska B., Jurkowski B. – “Studies of Sulfur Behavior in Rubber Compounds”, Journal of Applied Polymer Science, 1998

 Lopez L.M., Cosgrove A.B., Hernandez-Ortiz J.P., Osswald T.A. – “Modeling the Vulcanization Reaction of Silicone Rubber”, Polymer Engineering and Science, 2007

 Lopez-Manchado M.A., Arroyo M., Herrero B., Biagiotti J. – “Vulcanization Kinetics of Natural Rubber-Organoclay Nanocomposites”, Journal of Applied Polymer Science, 2003

 Nicchetti D. – “Determination of mechanical properties of silica compounds using a curing

kinetic model”, European Polymer Journal, Chiorino Lab, Italia, 2004

 Ozawa T. – “A New Method of Analyzing Thermogravimetric Data”, Electrotechnical Laboratory, Tokyo, 1965

 Picchetti Davide – “Processi di devulcanizzazione di gomma da pneumatici a fine vita”, Tesi di Laurea, Università di Pisa, Corso di Laurea in Ingegneria Chimica, Dicembre 2006

 Rosca I.D., Vergnaud J.M. – “Rheometers with square root of time-temperature programming for the cure of rubbers”, Polymer, Aprile 2003

 Salla J.M., Ramis X., Morancho J.M., Cadenato A. – “Isoconversional kinetic analysis of a

carboxyl terminated polyester resin crosslinked with triglycidyl isocyanurate (TGIC) used in powder coatings from experimental results obtained by DSC and TMDSC”, Thermochimica Acta, 2001

 Simon P., Kucma A. – “DSC Analysis of the Induction Period in the Vulcanisation of Rubber Compounds”, Journal of Thermal Analysis and Calorimetry, 1999

 Sini F. – “Analisi dinamica e sperimentale di una ruota per autoveicoli”, Tesi di Laurea, Politecnico di Torino, Corso di Laurea in Ingegneria Meccanica, 2001

 UNI 8342 – “Detrminazione delle caratteristiche di vulcanizzazione con vulcanografo a rotore oscillante”, Gennaio 1997

 Vyazovkin S., Linert W. – “False isokinetic relationships found in the nonisothermal decomposition of solids”, Chemical Physics, 1995

 Vyazovkin S., Linert W. – “The Application of Isoconversional Methods for Analyzing Isokinetic

Relationships Occurring at Thermal Decomposition of Solids”, Journal of Solid State Chemistry, 1995

 Vyazovkin S., Wight C.A. – “Model-free and model-fitting approaches to kinetic analysis of isothermal and nonisothermal data”, Thermochimica Acta, 1999

 Zhou T., Gu M., Jin Y., Wang J. – “Studying on the curing kinetics of a DGEBA/EMI-2,4/nano- sized carborundum system with two curing kinetic