125
Allegati
Allegato 1 – Dispositivi ZB-2000 series ICP DAS
Tipo Modello Descrizione
ZigBee AIO
ZB-2015-T Wireless 6-ch RTD Input Module with 3-wire RTD Lead Resistance Elimination ZB-2017-T Wireless 8-ch Analog Input Module with High
Voltage Protection
ZB-2017C-T/ZB-2017C-PA Wireless 8-ch Current Input Module with High Common Voltage Protection
ZB-2018-T Wireless 8-ch Analog Input Module with High Voltage Protection
ZB-2024-T/ZB-2024-PA Wireless 4-ch Voltage/Current Output Module ZB-2026-T Wireless 4-ch Voltage Input, 2-ch Voltage
Output and 2-ch Digital Output Module ZB-2026-PA
ZigBee DIO
ZB-2042-T Wireless ch PhotoMOS Relay Output and 4-ch Open Collector Output Module ZB-2043-T Wireless 14-ch Isolated Digital Output Module
ZB-2052 Wireless 8-ch Isolated Digital Input Module with 16-bit Counters
ZB-2052-T Wireless 8-ch Isolated Digital Input Module with 16-bit Counters
ZB-2053-T Wireless 14-ch Isolated Digital Input Module ZB-2060-T/ZB-2060-PA Wireless 6-ch Isolated Digital Input and 4-ch
Relay Output Module
ZigBee Sniffer ZB-2500 ZigBee Sniffer
ZigBee Repeater
ZB-2510-T ZigBee Repeater
ZB-2510-PA ZigBee Repeater
ZigBee Converter
ZB-2550-T RS-485/RS-232 to ZigBee Converter (Host) ZB-2550-PA RS-485/RS-232 to ZigBee Converter (Host)
(long range)
ZB-2551-T RS-485/RS-232 to ZigBee Converter (Slave) ZB-2551-PA RS-485/RS-232 to ZigBee Converter (Slave)
(longrange)
ZB-2570 Ethernet/RS-485/RS-232 to ZigBee Converter (Host)
ZB-2570-T Ethernet/RS-485/RS-232 to ZigBee Converter (Host)
ZB-2570P Ethernet/RS-485/RS-232 to ZigBee Converter (Host) (long range)
ZB-2570-PA Ethernet/RS-485/RS-232 to ZigBee Converter (Host) (long range)
ZB-2571-T Ethernet/RS-485/RS-232 to ZigBee Converter (Slave)
ZB-2571-PA Ethernet/RS-485/RS-232 to ZigBee Converter(Slave) (long range)
126
127
128
129
Allegato 5 – Module Analog Input ZB-2018-T specification and
appearance
130
131
132
Allegato 8 – PowerStream Robust 24VAC to 24VDC Power Supply
specification
24VAC to 24VDC
Input Voltage 19VAC to 28VAC
Output Voltage 24.0 VDC ± 0.2 VDC
Output Current 2.5A or less
Line regulation ± 5%
Load regulation ± 5.0%
Maximum output ripple 10mV p-p
Maximum switching noise level 90mV p-p
Maximum operating temperature range -40°C to 75°C (-40°F to 167°F) Maximum storage temperature range -40°C to 90°C (- 40°F to 194°F) Minimum efficiency 78% 24 VAC input, 0.15A load
Physical Specifications
Weight 1.34 lbs, 620 gramsbout 3.8 ounces
Dimensions including flange
Length Width Height 180 mm (7.1 inches) 89mm (3.5 inches) 42mm (1.6 inches)
133
Allegato 9 – CB-DIN-540A Power Supply specification
Features
Input Range : 85V-264AC
Input Frequency : 47Hz to 63 Hz
Input Current : less than 1A at 115Vac or 0.6A at 230V
Inrush Current : not exceed 30A at 115Vac or 60A at 230V
Output : 24 VDC/1.7 A
Ripple/Noise : “Peak to Peak” less than 240 mV
Line Regulation : less than +/-1% by changing the output
load +/-40% from 60% rated lo
Load Regulation : less than +/-1% by changing the output load +/-40% from 60% rated load
Efficiency : higher than 7
Hold-up Time : 20ms (typ.) at 115V
Protection : Over Voltage Protection . The trip point is around 26.2V to 31V output
Operating Temperature : -20°C ~ 70°C
Storage Temperature : -40°C ~ 85°C
Altitude : 0-10,000
MTBF : 396,220 Hrs
Include power ON/OFF switch
Safe UL 1950 ,CSA 22.2 No. VDE EN 60 950
EMI : FCC docket 20780 curv“B”,EN55022
EMS : EN-50082
IEC 801-2,8KV (air discharge) criteria B IEC 801-3,3V/M criteria B
IEC 801-4,2KV (air discharge) criteria B IEC 801-5,2KV (air discharge) criteria B
Dimensions
