[2] Doell C., MPC Products Corporation, Drive By Wire technology, Proceedings of Vehicle Technologies Symposium - Intelligent system for the Objective Fleet, 2001

B IBLIOGRAFIA

[1] Bretz E. A., By-Wire cars turn the corner, IEEE, Spectrum, April 2001, v.38 n.4 p.22

[2] Doell C., MPC Products Corporation, Drive By Wire technology, Proceedings of Vehicle Technologies Symposium - Intelligent system for the Objective Fleet, 2001

[3] Department of Computer Engineering, Chalmers University of Technology, Sirius 2001: A university Drive By Wire project, Göteborg, Sweden, 2001

[4] Donoghue P., Larson G.L., Dandoe S., Extending technology to Drive-By-Wire control, Institute of navigation, Partnership for Technology conversion, 1994, p 63-71

[5] West J.G., The Present Status of Electric Machines in Vehicles, IEEE Colloquium on machines for Automotive Applications, London 1996, p.1

[6] Guiggiani M., Dinamica del Veicolo, Città Studi Edizioni, Torino 1998

[7] Guiggiani M., Sulla stabilità di un semplice modello di veicolo, Atti del XIII Congresso Nazionale di AIMETA, 1997 Siena, vol. II, pp. 267-272

[8] ISO/TR 3888, Road vehicles - test procedure for a severe lane change manouvre, 1975.

[9] ISO 4138, Road vehicles - Steady state circular test procedure, 1982

[10] ISO/CD 7401, Road vehicles - Lateral transient response test method, 1995

[11] ISO 8855, Road vehicles - Vehicle dynamics and road holding

ability - Vocabulary, 1991

[12] Milliken W.F., Dell’Amico, Rice R.S., The static directional

stability and control of the automobile, SAE Transactions, 1976, paper n. 760712, pp. 2216-2277

[13] Milliken W.F., Rice R.S., Moment method, IMechE, 1983, paper n.

C113/83, pp. 31-60

[14] Pacejka H.B., Lateral stability of road vehicles, ICTS,

Proceedings of the Third Course on adnvanced vehicle dynamics, 1986 Amalfi, pp. 75-120

[15] Segel L., Theoretical prediction and experimental substantiation of the response of the automobile to steering control, Proceeding of The Automobile Division of IMechE, 1957, vol. 7, pp. 310-330 [16] Segel L., Basic Linear theory of handling stability of

automobiles, ICTS, Proceeding of the First Course on Advance dynamics, 1982 Amalfi, pp.19-87

[17] Morelli A., Costruzioni automobilistiche, ISEDI, 1977 Milano [18] Pollone G., Costruzioni automobilistiche - Il veicolo, Levrotto &

Bella, 1960 Torino

[19] Ellis J.R., Vehicle handling dynamics, Mechanical Engineering Publications, 1994 Londra

[20] Genta G., Meccanica dell’autoveicolo, Levrotto & Bella, 1993 Torino

[21] Ackermann J., Robust Control Prevents Car Skidding, speech hold at the CDC for the Bode Prize lecture, June 1996.

[22] Fujioka T., Shirano S., Matsushita A., Driver's behaviour under steering assist control system, IEEE, 1999.

[23] Wang L., Ackermann J., Robustly stabilizing PID controllers for car steering systems, Proceedings of the American Control

Conference, Philadelphia, Pennsylvania, USA, June 1998, pp. 41- 42

[24] Ackermann J., Robust car steering by yaw rate control,

Proceedings of the 29th Conference on Decision and Control,

Honolulu, Hawaii, December 1990, pp.2033-2034

[25] Ackermann J., Robust yaw damping of cars with front and rear steering, Proceedings of the 31st Conference on Decision and Control, Tucson, Arizona, December 1992, pp. 2586-2590 [26] Ackermann J., Robust Control - Systems with Uncertain

Physical Parameters, Springer-Verlag, London, 1993.

[27] Fukao T., Miyasaka S., Mori K., Adachi N., Osuka K., Active

Steering systems based on model reference adaptive non linear control, IEEE Intelligent Transportation System Conference,

Oakland (CA) USA, August 2001, p.502

[28] Ito K., Fujishiro T., Kawabe T., Kanai K., Ochi Y., A new way of controlling a four wheel steering vehicle, Transaction of the SICE, Vol. 23, pp. 828 - 834, 1986

[29] Ryu J., Kim H., Virtual Environment for developing Electronic Power Steering & Steer-By-Wire systems, Proceedings og

International American Conference on intelligent robots and systems, IEEE, 1999, p.1374

[30] Huh K., Seo C., Kim J., Hong D., Active Steering control based on the Estimated Tyre Force, Proceedings of american Control Conference, San Diego, California, June 1999, p.729

[31] Güvenç B.A., Güvenç L., Robust Steer-By-Wire control based on the Model Regulator, Proceedings of IEEE International

Conference on Control Applications, Glasgow Scotland U.K., September 18-20, 2002, p.435.

[32] Ahlström K., Torin J., Design method for conceptual design of By-Wire control: Two Case Studies, Proceedings of the IEEE International Conference on Engineering of COmplex computer Systems, 2001, p. 133

[33] Stanton N. A., Marsden P., From Fly-By-Wire to Drive-By-Wire:

safety implications of automation in vehicles, Safety Science, vol.24 No.1 pp.35, 1996

[34] Hayama Ryouhei, Nishizaki K., Nakano S., Katou K., The vehicle

stability control responsability improvemente using Steer-By-

Wire, Proceedings of IEEE Intelligent vehicle Symposium 2000,

Deaborn MI, USA, October 3-5 2000, p.596

[35] Haney P.R., Richardson M.J., Jaguar Cars Ltd Ford Motor

Company Ltd, Adaptive Cruise Control, system organisation and development for motor vehicles

[36] Isermann R., Schwartz R., Stoltz S., Fault-Tolerant Drive-By- Wire systems, IEEE Control Systems Magazine, October 2002, v.22 n.5 p.64

[37] Krishnaswami V., Tizzoni G., Vehicle steering system state estimation using sliding mode observers, Proceedings of 24th Conference on decision & control, New Orleans LA - December 1995, p. 3391.

[38] Utkin V., Sliding mode control design based on the Ackermann's Formula, IEEE, Transactions on automatic control, vol. 43, n. 2, pp.234-237, february 1998

[39] Utkin V., Guldner J., Ackermann J., A sliding mode control

approach to automatic car steering,Proceedings of the American Control Conference, Baltimora, Maryland, June 1994, pp. 1969- 1973

[40] Zaremba A.T., Liubakka M.K., Stuntz R.M., Control and steering feel issues in the design of an electric Power Steering System, American Control Conference, Philadelphia 1998, v.1 p.36

[41] Paulsen J.J., Giachino J.M., Powertrain sensors and actuators:

driving towards optimized vehicle performance, IEEE Vehicular Technology Conference, San Francisco 1989, v.2 p.574

[42] Hazelden R.J., Application of an optical torque sensor to a

vehicle Power Steering System, IEEE Colloquium on Automotive Sensors, Solihull, 1992 p.9/1

[43] Ackermann J., Bünte T., Actuator rate limits in robust car

steering control, Proceedings of the 36th Conference on Decision and Control, San Diego, Valifornia, USA, December 1997, pp.

4726-4731.

[44] Boldea I., Nasar S. A., Linear electric actuators and generators, Cambridge University Press, 1997.

[45] Deng Z., Boldea I., S. A. Nasar, Forces and parameters of permanent magnet linear synchronous machines, IEEE transaction, vol. MAG-23, 1987, pp. 305 - 309

[46] Cathley J.J., Topmiller D.A., Nasar S.A., Performance of a self- synchronous motor for artificial pump drive, IEEE transactions, vol. MAG-24, 1988, pp. 2194 - 2203

[47] Ustun O., Tuncay R.N., Design, analysis and control of a novel linear actuator, IEEE transaciotns, vol. GEN-10, 2001, pp. 27 - 32.

[48] Jang S., Jeong S., Reduction of armature reaction and inductance in the moving coil linear actuator for a high performance drive, IEEE transactions, 2002, p. 11.

[49] Takeuchi K., Shimizu M., Okazaki K., Nakata T., Takahashi N., Fujiwara K., Fast actuator modeling by finite element method, IEEE, Trans. on Magnetics, June 1994, v.30 n.6 p.4284

[50] Lemor P.C., The roller screw, an efficient and reliable

mechanical component of electro-mechanical actuators, IEEE transactions, vol. 7/16, 1996, pp. 215 - 220.

[51] Hagiwara T., Hirose S., Development of duel mode x-screw: a novel load-sensitive linear acrtuator with a wide trasmission range, Proceedings of the 1999 IEEE International Conference on Robotics & Automation, Detroit, Michigan, USA, MAy 1999, pp.

537 - 542

[52] Pawlak A.M., Schultz S., Gangla V., Rotary actuators with multipole ring magnets, IEEE Trans. on Industry Applications, December 1995, v.31 n.6 p.1306

[53] Weh H., Mosebach H., Niemann W., Tareilus A., Field control in synchronous machines with permanent magnet exitation in flux concentration mode, proceedings of ICE'90 International

COnference on Electrical MAchines, pp. 143 - 148, Aug. 13 - 15,

1990, MIT Boston, MA, USA.

[54] Harris M.R., Static torque production in saturated doubly-salient toothed structures, Proceedings of IEEE, vol. 122, pp. 1121 - 1127, October 1975.

[55] Bolognesi P., Bruno O., Landi A., Sani L., Taponecco L., Electric machines and driver for X-By-Wire systems in round vehicles, EPE, Tolosa 2003.

[56] Zetterstrom S., Electromechanical steering, suspension, drive

and brake modules, IEEE 56

Vehicular Technology Conference,

2002, vol.3 p.1852