9. PARTECIPAZIONE A PROGETTI DI RICERCA
9.4 Contratti con Aziende
− Il candidato è stato titolare del contratto con l’azienda Smi Group S.p.A. relativo alla progettazione di interfacce uomo-macchina nel periodo tra il 6 e il 29 marzo 2019.
Pagina 12 10. PARTECIPAZIONI A CONFERENZE E CONVEGNI NAZIONALI O INTERNAZIONALI Il candidato ha partecipato e parteciperà a conferenze nazionali ed internazionali come relatore ai seguenti convegni internazionali con peer-review:
− Relatore al convegno ADM 2019 - Modena (Italia) per l’articolo scientifico intitolato “3D Scanning Procedure for the Evaluation of Lymphedema of Upper Limbs Using Low-Cost Technology: a Preliminary Study”, Settembre 2019.
− Relatore al convegno ASME IDETC/CIE CAPPD 2019 - Anaheim (California) per l’articolo scientifico intitolato “A New Approach For Medical Assessment Of Patient’s Injured Shoulder”, Agosto 2019.
− Invited Speaker alla conferenza dHealth 2019, Vienna, Austria. La conferenza si è svolta dal 28 al 29 maggio 2019.
− Relatore al convegno ASME IDETC/CIE VES 2019 - Anaheim (California) per l’articolo scientifico intitolato “Towards A Broad Use Of Gamification Based On Hand Tracking In Post Stroke Patients”, Agosto 2019.
− Relatore al convegno CAD&A Conference 2019, Singapore per l’articolo scientifico intitolato
“Assessment of Patient’s Injured Shoulder Based On Digital Motion Acquisition”, Giugno 2019.
− Relatore al convegno ASME IDETC/CIE CAPPD 2018 - Québec (Canada) per l’articolo scientifico intitolato “A Method To Analyse Generic Human Motion With Low-Cost Mocap Technologies”, Agosto 2018.
− Relatore al convegno ASME IDETC/CIE VES 2018 - Québec (Canada) per l’articolo scientifico intitolato “Virtual Reality Applications: Guidelines To Design Natural User Inteface”, Agosto 2018.
− Relatore al convegno CAD&A Conference 2018 - Parigi (Francia) per l’articolo scientifico intitolato
“Assessment of Spinal Cord Injured (SCI) Patients Based On Digital Motion Acquisition”, Giugno 2018.
− Relatore al convegno CAD&A Conference 2017 - Okayama (Giappone) per l’articolo scientifico intitolato “A plug-in for local mesh modeling to extend VTK library: an application for the medical sector”, Agosto 2017.
− Relatore al convegno International Conference on Innovative Design and Manufacturing (ICDM) 2017 - Milano (Italia) per l’articolo scientifico intitolato “Guidelines to Develop Natural User Interfaces for Virtual Reality Solutions”, Luglio 2017.
− Relatore al convegno CAD&A Conference 2016 - Vancouver (Canada) per l’articolo scientifico intitolato “A Virtual Environment to Emulate Tailor’s Work”, Giugno 2016.
− Relatore al convegno 6th Int. Conf. on 3D Body Scanning Technologies, Lugano, (CH) per l’articolo scientifico intitolato “Low Cost 3D Scanners Along the Design of Lower Limb Prosthesis”, Ottobre 2015.
− Relatore al convegno REHAB Workshop 2015 – Lisbona (Portogallo) per l’articolo scientifico intitolato “Multi-Material Design And 3d Printing Method Of Lower Limb Prosthetic Sockets”, Settembre 2015.
− Relatore al convegno ASME IDETC/CIE 2015 - Boston (MA, USA) per l’articolo scientifico intitolato
“Automatic Generation Of Software Interfaces For Hand-Tracking Devices”,. Agosto 2015.
− Relatore al convegno CAD&A Conference 2015 - Londra (UK) per l’articolo scientifico intitolato
“Mixed Reality to Design Lower Limb Prosthesis”, Giugno 2015.
− Relatore al convegno ASME IDETC/CIE 2014 - Buffalo (NY, USA) per l’articolo scientifico intitolato
“A Preliminary Study Of New Interaction Devices To Enhance Virtual Socket Design”, Agosto 2014.
− Relatore al convegno CAD&A Conference 2014 - Hong Kong (China) per l’articolo scientifico intitolato “SimplyNURBS: A software library to model NURBS for medical applications”, Giugno 2014.
− Relatore al convegno ICVR - International Conference On Virtual Rehabilitation 2013 – Philadelphia (USA) per l’articolo scientifico intitolato “An environment for contrast-based treatment of amblyopia using 3D technology”, Agosto 2013.
− Presentazione poster intitolato “Augmeted Interaction for Socket Virtual Design” ASME IDETC/CIE 2013. Portland, USA. Agosto 2013.
Pagina 13 11. PREMI E RICONOSCIMENTI
Il candidato ha ricevuto riconoscimenti internazionali nelle seguenti occasioni:
− Innovact - The European Forum for Innovative Start-Ups - 3rd Prize. Chambre de Commerce et d'Industrie de Reims et d'Epernay. Vincitore del terzo premio attraverso la presentazione del progetto “Virtual Socket Design – VK Group, University of Bergamo”. Il concorso contava più di 120 progetti provenienti da tutta Europa. Marzo 2013. Reims, Francia.
− ASME/CIE 2013: Travel Award for Poster Presentation, Conferenza ASME/CIE 2013, 4-7 Agosto 2013. Portland, Oregon (USA). Sono stati selezionati dal comitato organizzatore della conferenza 12 poster su 29 presentati.
− Best Paper Award per l’articolo scientifico “Optimization Method for Additive Manufacturing: an Application in the Medical Field”, International Conference on Innovative Design and Manufacturing, ICIDM 2016, Gennaio 24-26, 2016, Auckland, New Zealand, Australia.
− The most distinguished paper per l’articolo scientifico “ICT technology for innovating the garment design process in fashion industry”, 6th International Conference on Research into Design ICoRD
’17, Gennaio 9-11, 2017, Guwahati, India.
12. ORGANIZZAZIONE DI CONVEGNI E REVISIONE SCIENTIFICA
Partecipa attivamente alla promozione e disseminazione dei risultati scientifici in ambito internazionale. Di seguito sono descritte le principali attività svolte.
Agosto 2017 – Luglio 2018 è stato Membro e Segretario del TC (Technical Committee) VES (Virtual Environments and Systems) della Conferenza annuale ASME IDETC-CIE.
Dall’agosto 2018 è Symposium Chair del TC (technical Committee) VES (Virtual Environments and Systems) della Conferenza annuale ASME IDETC-CIE.
È stato Session Chairman per le seguenti sessione di conferenze internazionali:
- ASME DETC-CIE VES Conference del 2015 e del 2019;
- International CAD Conference and Exhibition 2017 per la sessione di Bioengineering.
È stato membro del Organizing Committee delle seguenti Conferenze Internazionali:
− International CAD Conference and Exhibition 2013, Bergamo, Italy, 17-20 Giugno 2013;
− International Conference on Innovative Design and Manufacturing (ICIDM): June 17-19, 2017, Milan, Italy.
È ed è stato revisore per Conferenze Internazionali, tra i quali:
− ASME IDETC-CIE Conferences dal 2013 ad oggi;
− CAD Conference and Exhibition dal 2015 ad oggi;
− ICIDM - International Conference on Innovative Design and Manufacturing dal 2016 ad oggi;
− ASME IMECE Conference dal 2018 ad oggi.
E’ stato, inoltre, revisore di articoli scientifici sulle riviste “Journal of Fashion Technology & Textile Engineering”, “Automation in Construction, Elsevier”, “Journal of Computing and Information Science in Engineering, ASME”, “Journal of Intelligent Manufacturing, Springer”, “Bioengineering, MDPI” e
“Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Cambridge University Press”, “Virtual and Physical Prototyping, Taylor & Francis Group”.
Ha gestito e partecipato alla Maker Faire Rome 2016 in rappresentanza del gruppo di ricerca V&K, Dipartimento di ingegneria dell’Università degli Studi di Bergamo dal 14 al 16 ottobre 2016.
13. PUBBLICAZIONI SCIENTIFICHE
Questo paragrafo riporta la lista delle pubblicazioni scientifiche suddivise in: Articoli in rivista internazionale, Capitolo di libro e Atti di convegno internazionali.
Pagina 14 Le 12 pubblicazioni sottoposte a valutazione sono state scelte in modo da coprire le diverse aree di ricerca e dimostrare continuità nella produzione scientifica.
Le Figure 1, 2 e 3 mostrano, rispettivamente, i dati bibliometrici pubblicati da Scopus, Google Scholar e Researchgate.
Figura 1. Dati bibliometrici Scopus (agg. 01/12/2019)
Pagina 15 Figura 2. Dati bibliometrici Google Scholar (agg. 01/12/2019)
Figura 3. Dati bibliometrici Researchgate (agg. 1/12/2019)
Pagina 16 13.1 Articoli in Rivista Internazionale
1. Vitali, A., Regazzoni, D. and Rizzi C. 2019. Digital motion acquisition to assess spinal cord injured (SCI) patients. Computer-Aided Design and Applications, 16(5), 962-971. DOI:
10.14733/cadaps.2019.962-971. Scopus indexed. Quartile: Q2, cat.: Computer Graphics and Computer-Aided Design.
2. Vitali, A. and Rizzi C. 2018. Acquisition of customer’s tailor measurements for 3D clothing design using virtual reality devices. Virtual and Physical Prototyping, 13(3), 131-145. DOI:
10.1080/17452759.2018.1474082. Scopus indexed. Quartile: Q1, all categories.
3. Colombo, G., Rizzi, C., Regazzoni, D., Vitali, A. 2018. 3D interactive environment for the design of medical devices. International Journal on Interactive Design and Manufacturing (IJIDeM), 12(2), 699-715. DOI:10.1007/s12008-018-0458-8. Scopus indexed. Quartile: Q2, all categories.
4. Vitali, A., Regazzoni, D., Rizzi, C., Colombo, G. 2018. Extending VTK library to dynamically modify polygonal meshes in medical applications. Computer-Aided Design and Applications, 15(2), 203-210. DOI: 10.1080/16864360.2017.1375670. Scopus indexed. Quartile: Q2, cat: Computer Graphics and Computer-Aided Design.
5. Comotti, C., Regazzoni, D., Rizzi, C., Vitali, A. 2017. Additive manufacturing to advance functional design: An application in the medical field. Journal of Computing and Information Science in Engineering, 17 (3), art. no. 031006, DOI: 10.1115/1.4033994. Scopus indexed. Quartile: Q1, cat:
Computer Graphics and Computer-Aided Design, Industrial and Manufacturing Engineering.
6. Vitali, A., Rizzi, C. 2017. A virtual environment to emulate tailor’s work. Computer-Aided Design and Applications, 14(5), 671-679.. DOI: 10.1080/16864360.2016.1273584. Scopus indexed.
Quartile: Q3, all categories.
7. Colombo, G., Facoetti, G., Rizzi, C., Vitali, A. Mixed reality to design lower limb prosthesis. (2016) Computer-Aided Design and Applications, 13 (6), pp. 799-807. DOI:
10.1080/16864360.2016.1168223. Scopus indexed. Quartile: Q2, cat: Computer Graphics and Computer-Aided Design.
8. Colombo, G., Facoetti, G., Rizzi, C., Vitali, A. 2015. Simplynurbs: A software library to model nurbs for medical applications. Computer-Aided Design and Applications, 12 (6), pp. 794-802. DOI:
10.1080/16864360.2015.1033346. Scopus indexed. Quartile: Q2, cat: Computer Graphics and Computer-Aided Design.
13.2 Capitoli di Libro
9. Regazzoni, D., Vitali, A., Rizzi, C. and Colombo, G. 2019. A virtual platform for lower limb prosthesis design and assessment. In DHM and Posturography , 733-746. Academic Press. DOI: 10.1016/B978-0-12-816713-7.00057-X . Awaiting scopus indexing.
13.3 Contributi in Atti di Convegno
10. Vitali, A., Regazzoni, D., Rizzi, C., and Maffioletti, F. 2019. A new approach for medical assessment of patient’s injured shoulder. Proceedings of the ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Volume 1: 39th Computers and Information in Engineering Conference. Anaheim, California, USA, V001T02A049.
ASME. DOI: 10.1115/DETC2019-97889 . Awaiting scopus indexing.
11. Regazzoni, D., Vitali, A., and Rizzi, C. 2019. Towards a broad use of gamification based on hand tracking in post stroke patients. Proceedings of the ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Volume 1: 39th Computers and Information in Engineering Conference. Anaheim, California, USA, V001T02A083.
ASME. DOI: 10.1115/DETC2019-97926 . Awaiting scopus indexing.
12. Vitali, A., Regazzoni, D., Rizzi, C., Molinero, G. 2019. 3D Scanning Procedure for the Evaluation of Lymphedema of Upper Limbs Using Low-Cost Technolgy: A Preliminary Study. In International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (pp. 177-188).
Springer, Cham. DOI: 10.1007/978-3-030-31154-4_16 . Awaiting scopus indexing.
Pagina 17 13. Regazzoni, D., Vitali, A., Rizzi, C., Colombo Zefinetti, F. 2018. Motion capture and data elaboration
to analyse wheelchair set-up and users’ performance. In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers Digital Collection.
DOI: 10.1115/IMECE2018-87531 . Scopus indexed.
14. Regazzoni, D., Rizzi, C., Vitali, A. 2018. Virtual reality applications: guidelines to design natural user interface. In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers Digital Collection.DOI: 10.1115/DETC201885867 . Scopus indexed.
15. Regazzoni, D., Vitali, A., Rizzi, C., Colombo, G. 2018. A method to analyse generic human motion with low-cost mocap technologies. In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers Digital Collection. DOI: 10.1115/DETC201886197 . Scopus indexed.
16. Cohen, M. W., Voldman, I., Regazzoni, D., Vitali, A. 2018. Hand rehabilitation via gesture recognition using leap motion controller. In 2018 11th International Conference on Human System Interaction (HSI) (pp. 404-410). IEEE. DOI: 10.1109/HSI.2018.8431349 . Scopus indexed.
17. Vitali, A., Regazzoni, D., Rizzi, C., Colombo, G. 2017. Design and additive manufacturing of lower limb prosthetic socket. In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers. DOI: 10.1115/IMECE2017-71494. Scopus indexed.
18. Regazzoni, D., Vitali, A., Rizzi, C. 2017. Analysis of patients with spinal cord injury using motion capture. In ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers. DOI:
10.1115/DETC2017-67901. Scopus indexed.
19. Regazzoni, D., Rizzi, C., Vitali, A. 2017. An Overview of Open Source Software Systems for Smart Development of Virtual Environments. In International Conference on Digital Human Modeling and Applications in Health, Safety, Ergonomics and Risk Management (pp. 358-368). Springer, Cham.
DOI: 10.1007/978-3-319-58463-8_30. Scopus indexed.
20. Carulli, M., Vitali, A., Caruso, G., Bordegoni, M., Rizzi, C., Cugini, U. 2017. ICT technology for innovating the garment design process in fashion industry. Smart Innovation, Systems and Technologies, 65, pp. 525-535. DOI: 10.1007/978-981-10-3518-0_46. Scopus indexed. The Most distinguished paper.
21. Regazzoni, D., Vitali, A., Rizzi, C. 2017 Low cost motion capture for wheelchair posture evaluation in patients with spinal cord injury. DHM, Conference of Digital Human Modelling.
22. Colombo, G., Comotti, C., Regazzoni, D., Rizzi, C., Vitali, A. 2016. Visual representation of dynamic pressure map on the digital human model of patient with a lower limb prosthesis. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9745, pp. 140-149. DOI: 10.1007/978-3-319-40247-5_15. Scopus indexed.
23. Vitali, A., D'Amico, L., Rizzi, C. Virtual tailor for garment design. 2016. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9740, pp. 653-661. DOI: 10.1007/978-3-319-39907-2_62. Scopus indexed.
24. Regazzoni, D., Vitali, A., Colombo, G., Rizzi, C. 2016. Virtual gait analysis tool to test lower limb prosthesis. ACM International Conference Proceeding Series, Part F126967, pp. 57-60. DOI:
10.1145/3051488.3051505. Scopus indexed.
25. Colombo, G., Comotti, C., Redaelli, D. F., Regazzoni D., Rizzi C., Vitali, A. 2016. A method to improve prosthesis leg design based on pressure analysis at the socket-residual limb interface. In Proceedings of ASME 2016 International Design Engineering Technical Conferences & Computer in Engineering Conference – IDETC/CIE, Charlotte, North Carolina, USA. Scopus Indexed.
26. Comotti, C., Regazzoni, D., Rizzi, C., Vitali, A. 2016. Optimization Method for Additive Manufacturing: an Application in the Medical Field. In Proceedings of International Conference on
Pagina 18 Innovative Design and Manufacturing, ICIDM 2016, January 24-26, 2016, Auckland, New Zealand, Australia. Best Paper Award.
27. Regazzoni, D., Comotti, C., Vitali, A., Rizzi, C., Colombo, G. 2016. Measure and analysis of dynamic contact pressure data on the residuum-socket interface in lower limb prosthetic patients. 4th International Digital Human Modeling Symposium – DHM2016, Montreal, Quebec, Canada.
28. Colombo, G., Comotti, C., Regazzoni, D., Rizzi, C., Vitali, A. 2016. 3D Scanning and design platform for lower limb prosthesis. In: Proceedings of TMCE 2016. p. 479-488, ISBN: 978-94-6186-635-6, Aix En Provence, France, 9-13 may, 2016
29. Colombo, G., Facoetti, G., Rizzi, C., Vitali, A. 2015. Low cost hand-tracking devices to design customized medical devices. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9179, pp. 351-360. DOI: 10.1007/978-3-319-21067-4_36. Scopus indexed.
30. Gargantini, A., Facoetti, G., Vitali, A. Measuring stereoacuity by 3D technology. 2015.
Communications in Computer and Information Science, 515, pp. 155-167. DOI: 10.1007/978-3-662-48645-0_14. Scopus indexed.
31. Bonfanti, S., Gargantini, A., Vitali, A. A mobile application for the stereoacuity test. 2015. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9185, pp. 315-326. DOI: 10.1007/978-3-319-21070-4_32. Scopus indexed.
32. Colombo, G., Facoetti, G., Rizzi, C., Vitali, A. 2015. Automatic identification of below-knee residuum anatomical zones. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9185, pp. 327-335. DOI: 10.1007/978-3-319-21070-4_33. Scopus indexed.
33. Comotti, C., Colombo, G., Regazzoni, D., Rizzi, C., Vitali, A. 2015. Low Cost 3D Scanners Along the Design of Lower Limb Prosthesis. In: Proceedings of the 6th International Conference and Exhibition on 3D Body Scanning Technologies. Lugano, Switzerland, 27-28 October 2015. p. 147-154, Lugano:
Hometrica Consulting, ISBN: 978-3-033-05270-3, Lugano (CH), 27- 28/11/2015, DOI:
10.15221/15.147.
34. Comotti, C., Regazzoni, D., Rizzi, C., Vitali, A. 2015. Multi-material design and 3D printing method of lower limb prosthetic sockets. In: REHAB '15 Proceedings of the 3rd 2015 Workshop on ICTs for improving Patients Rehabilitation Research Techniques. New York:ACM, ISBN: 978-1-4503-3898-1, Lisbon (Portugal). DOI: 10.1145/2838944.2838955. Scopus indexed.
35. Colombo, G., Rizzi, C., Facoetti, G., Vitali, A. 2015. Automatic generation of software interfaces for hand-tracking devices. Proceedings of the ASME Design Engineering Technical Conference, 1B-2015. DOI: 10.1115/DETC2015-47360. Scopus indexed.
36. Facoetti, G., Vitali, A., Colombo, G., Rizzi, C. 2014. A low cost haptic mouse for prosthetic socket modeling. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8529 LNCS, pp. 508-515. DOI: 10.1007/978-3-319-07725-3_50. Scopus indexed.
37. Facoetti, G., Gargantini, A., Vitali, A. 2014. An environment for domestic supervised amblyopia treatment. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8529 LNCS, pp. 340-350. DOI: 10.1007/978-3-319-07725-3_34. Scopus indexed.
38. Gargantini, A., Facoetti, G., Vitali, A. 2014. A random dot stereoacuity test based on 3D technology.
Proceedings of ACM SIGGRAPH - REHAB 2014, pp. 358-361. DOI:
10.4108/icst.pervasivehealth.2014.255333. Scopus indexed.
39. Colombo, G., Rizzi, C., Facoetti, G., Vitali, A. 2014. A preliminary study of new interaction devices to enhance virtual socket design. Proceedings of the ASME Design Engineering Technical Conference, 1B. Scopus indexed. DOI: 10.1115/DETC201435055. Scopus indexed.
Pagina 19 40. Colombo, G., Facoetti, G., Rizzi, C., Vitali, A., Zanello, A. 2013. Automatic 3D reconstruction of
transfemoral residual limb from MRI images. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8026 LNCS (PART 2), pp. 324-332. DOI: 10.1007/978-3-642-39182-8_38. Scopus indexed.
41. Vitali, A., Facoetti, G., Gargantini, A. 2013. An environment for contrast-based treatment of amblyopia using 3D technology. International Conference on Virtual Rehabilitation, ICVR 2013, art.
no. 6662073, pp. 76-79. DOI: 10.1109/ICVR.2013.6662073. Scopus indexed.
42. Colombo, G., Facoetti, G., Rizzi, C., Vitali, A. 2013. Socket virtual design based on low cost hand tracking and haptic devices. Proceedings - VRCAI 2013: 12th ACM SIGGRAPH International Conference on Virtual-Reality Continuum and Its Applications in Industry, pp. 63-69. DOI:
10.1145/2534329.2534351. Scopus indexed.
13.4 ARTICOLI SCIENTIFICI ACCETTATI E IN ATTESA DI PUBBLICAZIONE O IN FASE DI VALUTAZIONE
43. Vitali, A., Regazzoni, D., Rizzi C. Maffioletti F. 2019. Quantitative assessment of upper limb rehabilitation through digital motion acquisition. Computer-Aided Design and Applications.
Accepted.
44. Regazzoni, D., Vitali, A., Rizzi, C., Colombo Zefinetti, F. 2019 Gait analysis in the assessment of patients undergoing a total hip replacement. In ASME 2019 International Mechanical Engineering Congress and Exposition (IMECE). American Society of Mechanical Engineers Digital Collection.
Accepted.
45. Vitali, A., Regazzoni, D., Rizzi, C., and Maffioletti, F. 2019. Quantitative assessment of shoulder rehabilitation using digital motion acquisition and convolutional neural network. Journal of Computing and Information Science in Engineering. Under review.
13.5 POSTER SCIENTIFICI
46. Andrea Vitali. 2013. “Augmented Interaction for Socket Virtual Design”. ASME/CIE Conference 2013. Portland, Oregon (USA). Travel Award for Poster Presentation.
13.6 TESI DI DOTTORATO
47. Andrea Vitali. 2016. “Augmented interaction for custom-fit products by means of interaction devices at low costs”. Ph.D Thesis, XXVIII cycle. Università degli Studi di Padova.
Dalmine, 9 Dicembre 2019
In fede,
Andrea Vitali
Autorizzo al trattamento dei miei dati ai sensi del D.Lgs n°196/2003