In the measurement scan mode, press the OK button / confirmation menu to access the settings menu overview, as shown below:
The bar highlighted in yellow in the options menu corresponds to the option selected, press up and press down to scroll the bar; press the OK button to enter the desired option, each option is described in detail as follows:
8-1. Emissivity adjustment
For the definition of emissivity, refer to Appendix 11 for details. After entering the emissivity option, the interface is as shown below:
Press the up button to increase the emissivity; prolonged pressure will continuously increase the emissivity.
Press the down button to decrease the emissivity; the prolonged pressure will continuously decrease the emissivity. Press the OK button to confirm the current emissivity and exit the emissivity adjustment interface.
Press the back / on button to exit the emissivity setting interface, the emissivity value is not changed.
8-2. Unit settings
The unit settings can be set on different displays of the unit. After entering the drive options, the interface is as shown below:
Press the up button to move the highlighted yellow bar to another option. Press the down button the highlighted yellow bar moves to another option.
Press the OK confirmation / menu button to confirm the modification of the current temperature unit and to exit the setting interface. Press the back / start button to exit the setting interface, the temperature unit will not be changed.
8-3. Extreme settings
After entering the extreme option interface is as shown below:
Press the up button to move the highlighted yellow bar to another option Press the down button the highlighted yellow bar moves to another option.
Press the OK button to confirm the modification of the extreme current option to switch on the light and exit the extreme setting interface.
Press the back / on button to exit the extreme settings interface, extreme settings are not changed.
8-4. Color table options
After entering the color table option, the interface is as shown below:
Press the up button the highlighted yellow bar moves upwards. Press the down button the highlighted yellow bar moves down.
Press the OK button to confirm the current color and exit the color table settings screen.
Press the return / ignition button to exit the color table setting interface, the color will not be changed.
8-5. Date and time
After entering the date and time option, the interface is as shown below:
The highlighted yellow bar corresponds to that option and changes the value in that option accordingly. Press the up button on the corresponding number will increase. Press the down button the corresponding number will decrease. Press the OK confirmation / menu button, the highlighted yellow bar will jump to the different items in sequence. Press the back / on button to exit the date and time setting interface and save the current time and date.
8-6. Memory
After entering the storage option, the interface is as shown below:
The white frame shows the image stored in the internal memory of the meter. Press the up button on the highlighted blue bar will move upwards.
Press the down button , the blue highlighted bar moves down. Press the back / power button to exit the storage interface.
Press the OK confirmation / menu button to access the image preview interface, displaying the current blue.
Highlight the selected image, as shown below:
Press the up button to view the previous image, press the down button to view the next image
Press the back / on button to return to the storage interface.
Press the OK confirmation / menu button to display the confirmation window to delete the image, as shown in the following figure:
Press the OK confirmation / menu button, select '' Yes' to confirm the deletion of the image, the window is automatically closed and the next saved image is displayed.
Press the back / on button and select "No" to cancel the image deletion. Confirm, the window closes automatically.
8-7. Alarm
After entering the alarm option, the interface is as shown below:
Press the up button , the highlighted yellow bar moves to another option. Press the down button , the highlighted yellow bar moves to another option. Press the back / on button to exit the alarm setting interface.
Press the OK confirmation / menu button to access the corresponding high alarm / low alarm interface according to the highlighted selection bar. If you select the high alarm option, enter the alarm interface as shown below:
Press the up button to increase the threshold for high temperature alarms; press and hold to increase continuously.
Press the down button to decrease the threshold for high temperature alarms; press and hold to decrease continuously.
Press the OK confirmation / menu button, to open or close the start button open this button to indicate that, if the measured object is above the set maximum temperature threshold, the instrument will sound an alarm, if it is not closed. no alarm sound will be heard.
Press the back / on button to exit the high alarm interface and return to the alarm options interface.
If the low alarm option is selected, enter the alarm interface as shown below:
Press the up button to increase the threshold for low temperature alarms; press and hold to increase continuously.
Press the down button to decrease the threshold for low temperature alarms; press and hold to decrease continuously. Press the OK
confirmation / menu button to open or close the
start button . If this button is lit, it indicates that if the measured object is higher than the minimum set temperature threshold, the instrument will sound an alarm; if it's closed, no alarm will sound.
8-8. Backlight adjustment
After entering the backlight adjustment option, the interface is as shown below:
Press the up button to increase the brightness of the display backlight; apply prolonged pressure to continuously increase.
Press the down button the brightness of the display backlight will decrease, apply long press to decrease continuously.
Press the OK button to confirm the change in the current backlight brightness and exit the backlight adjustment screen
Press the back / on button to not change the brightness of the backlight and exit the backlight adjustment interface.
8-9. Melting distance
By using aligned visible images and infrared images, image fusion makes it easier to understand infrared images. The product acquires a visual image with each image a infrared to accurately display the target area and share it more effectively with others. After entering the fusion distance option, the interface is as shown below:
Press the up button on the highlighted yellow bar moves upwards.
Press the button down the highlighted yellow bar moves downwards.
Press the OK confirmation / menu button to confirm the modification of the melting distance corresponding to the current color bar and exit the melting distance interface.
Press the back / on button to exit the melting distance setting interface and the melting distance will not be changed.
8-10. G-SENSOR
G-SENSOR is a three-axis gravity acceleration sensor, which can be switched from gravity to switch between menus and to change image (at the time of image preview). The portable instrument is facing towards itself, shaking it to the left, moving the menu upwards or switching to the previous image (for previewing the image); Shake right, move the menu down or move to the next image (when the image is previewed). After entering the G-SENSOR option, the interface is as follows:
Press the up button , the highlighted yellow bar moves to another option. Press the down button , the highlighted yellow bar moves to the other option.
Press the OK confirmation / menu button to confirm the modification of the current G-SENSOR to activate the light and exit the G-SENSOR setting interface.
Press the return / ignition button to exit the G-SENSOR switch setting interface, the G-SENSOR switch will not be changed.
8-11. Language selection
This setting can set the instrument to display in different national languages, enter the language selection option and the interface is as shown in the following figure:
Press the up button on the highlighted yellow bar moves to another option. Press the down button , the highlighted yellow bar moves to the other option.
Press the OK confirmation / menu button, then confirm to enter the highlighted language and exit the language setting interface.
Press the back / on button to exit the language interface. The language selection is not changed.
8-12. Information
This option shows the factory information, version number, etc. of the instrument. Enter the information option, the interface is as shown below:
Model: Model of the instrument SN: Serial number of the instrument Version: Version number
Release date: Date of manufacture
9. Precautions
1. Before using this product, make sure the battery is installed and is fully charged.
2. When using this product, make sure the temperature is close to room temperature.
3. The micro USB on the device can be connected to a computer via a USB cable. The computer can view the photos that are saved in the tool.
If you use a rechargeable battery, the micro USB will not charge the battery.
4. The instrument was calibrated at the factory before shipment. If it is necessary to recalibrate, contact your local dealer.
5. Pay attention to cleaning the surface of the instrument. Clean the case with a damp cloth if necessary. Use a high-quality lens cloth to remove dust or stains from the crystals and from the display window. Do not use abrasives or solvents to clean the case, lens or viewing window.
10. Appendix