• Non ci sono risultati.

[d] – M. Alam, J. Song, R. Acharya, A. Boehman, K. Miller; Combustion and Emission Performance of Low Sulfur, Ultra Low Sulfur and Biodiesel Blends in a DI Diesel , Engine, Journal of Fuels and Lubricants, 2004-01-3024.

N/A
N/A
Protected

Academic year: 2021

Condividi "[d] – M. Alam, J. Song, R. Acharya, A. Boehman, K. Miller; Combustion and Emission Performance of Low Sulfur, Ultra Low Sulfur and Biodiesel Blends in a DI Diesel , Engine, Journal of Fuels and Lubricants, 2004-01-3024. "

Copied!
1
0
0

Testo completo

(1)

Bibliografia

[a] – Carlo N. Grimaldi, Lucio Postrioti, Michele Battistoni, Federico Millo; Common Rail HSDI Diesel Engine Combustion and Emissions with Fossil/Bio-Derived Fuel Blends, Journal of Engine, 2002-01-0865.

[b] – Ralph McGill, John Storey, Robert Wagner, David Irick, Päivi Aakko, Mårten Westerholm, Nils-Olof Nylund, Maija Lappi; Emission Performance of Selected Biodiesel Fuels, Journal of Fuels and Lubricants, 2003-01-1866.

[c] – A. S. Cheng, Bruce A. Buchholz, Robert W. Dibble; Isotopic Tracing of Fuel Carbo in the Emissions of a Compression-Ignition Engine Fueled with Biodiesel Blends, Journal of Fuels and Lubricants, 2003-01-2282.

[d] – M. Alam, J. Song, R. Acharya, A. Boehman, K. Miller; Combustion and Emission Performance of Low Sulfur, Ultra Low Sulfur and Biodiesel Blends in a DI Diesel , Engine, Journal of Fuels and Lubricants, 2004-01-3024.

[e] – R. E. Canaan, J. E. Dec, R. M. Green, D. T. Daly, The Influence of Fuel Volatility on the Liquid-Phase Fuel Penetration in a Heavy-Duty D.I. Diesel Engine, SAE Paper 980510, 1998.

[f] – D. L. Siebers, Liquid-Phase Fuel Penetration Diesel Sprays, SAE Paper 980809, 1998.

[g] – Y. Kidoguchi, K. Miwa, C. Yang, Effect of Fuel Properties on Combustion and Emission Characteristics of a Direct-Injection Diesel Engine, SAE Paper 2000- 01-1851, 2000.

[h]

– LabVIEW User Manual ( National Instruments).

[i] – http://www.lombardinigroup.it/, consultato il 18/01/2008.

Riferimenti

Documenti correlati

They stated that the addition of butanol with a percentage of up to 20% to the biodiesel – diesel fuel blend resulted in a tolerable change in the engine performance,

- blend of sewage sludge with oats grain in the form of granules could provide a stable combustion in the tested boiler, yet the thermal output has decreased with about 30%

Characterisation for biodiesel and petroleum diesel were done on the following ASTM properties: density, kinematic viscosity, cloud point, water and sediment, fame contain,

In the biodiesel production process, impurities such as Saturated Monoglycerides (SMG) in the form of monostearin that precipitate at low temperature are commonly formed.. This

Effect of piston bowl geometry on combustion and emission characteristics of biodiesel fueled diesel engines, Fuel 120(2014) 66-73. Jinxiang,

Aim - The haematological profiles, salivary cortisol concentrations, and behavioural responses of Valdostana calves housed in either tie-stalls (TS) or multiple pens (MP) were

Thus, the comparision of sulfur and oxygen abundances can provide some clues about the sulfur nucleosyntesis, and the optimum stellar mass range for the production of sulfur..

maximum luminosity of the regular combustion process near the fuel jets of the main and