Bibliografia
Bibliografia
[1] Abt, S.R., Ruff, J.F. and Wittles, R.J. (1991). "Estimating flow trough riprap". J. Hydr. Engrg., ASCE, 117 (5), 670-675.
[2] Afzalimehr, H. and Anctil, F. (1998), “Estimation of gravel-bed river flow resistance”. J. Hydr. Engrg., ASCE, 124 (10), 1054-1058.
[3] Baimonte, G. and Ferro, V. (1997). “The influence of roughness geometry and shields parameter on flow resisteance in gravel-bed channels”.
Earth Surf. Process. Landforms, 22, 759-772.
[4] Bathurst, J.C. (1978). "Flow resistance of large-scale roughness". J.
Hydr. Div., ASCE, 104 (12), 1587-1603.
[5] Bathurst, J.C. (1985). "Flow resitance estimation in mountain rivers". J.
Hydr. Engrg., ASCE, 111 (4), 625-643.
[6] Bathurst, J.C. (2002). "At-a-site variation and minimum flaw resistance for mountain rivers". J. Hydrology, 269, 11-26.
[7] Bathurst, J.C., Li, R.M. and Simons, D.B. (1981). "Resistance equation for large-scale roughness". J. Hydr. Engrg., ASCE, 107 (12), 1593-1613.
[8] Bezzola, G.R. (2002). "Fliesswiderstand und sohlenstabilität natülicher gerinne". VAW. Mitteilungen 173. Zürich 2002
[9] Byazit, M. (1975). "Free surface flow in a channel of large relative roughness". J. Hydr. Res., 14 (2), 115-125.
[10] Canovaro, F., Paris, E. and Solari, L. (2004). "Influence of
macroroughness arrangemente on flow resisistance". Proces.,River Flow 2004, Balkema, Rotterdam, The Netherlands, 287-293
[11] Carollo, F.G. and Ferro, V. (2005). "Resistenze al moto di alvei granulari in condizioni di macroscabrezza". Recenti acquisizioni nel settore delle sistemazioni idraulico forestali, ed. Bios, 127-152
Moto uniforme su rampe in pietrame in condizioni di macroscabrezza
-1-
Bibliografia
[12] Chen, X. and Chiew, Y.M. (2003). "Response of velocity and turbulence to sudden change of bed roughness in open-channel flow". J. Hydr. Engrg., ASCE, 129 (1), 35-43.
[13] Cheng, N.S. and Lloyd, H.C.C. (2005). "Comparision of sidewall correction of bed shear stress in open-channel flows". J. Hydr. Engrg., ASCE, 131 (7), 605-609.
[14] Chiavaccini, P. (2005) "Comportamento idraulico ed analisi della
resistenzaa strutturale di rampe in pietrame. Dipartimento di Ingegneria Civile. Tesi di Dottorato, Pisa. 21-69
[15] Clifford, N.J., Robert, A., and Richards, K.S. (1992). “Estimation of flw resistance in gravel-bedded rivers: a physical explanation of the
multipler of roughness length”. Earth Surf. Process. Landforms, 17, 111- 126.
[16] Codell, R.B., Abt, S.R. and Johnson, T. (1990). "Estimation of flow trough and over armored slopes". J. Hydr. Engrg., ASCE, 116 (10), 1252- 1269.
[17] Colosimo, C.,Copertino, V.A. and Veltri, M. (1988). "Friction factor evaluation in gravel-bed rivers". J. Hydr. Engrg., ASCE, 114 (8), 861- 876.
[18] Ferro, V. (1999). “Friction Factor for gravel-bed channel with high boulder concentration”. J. Hydr. Engrg., ASCE, 125 (7), 771-778.
[19] Ferro, V. (2003). “Flow resistance in gravel-bed channels with large- scale roughness”. Earth Surf. Process. Landforms., 28, 1325-1339.
[20] Ferro, V., Dalla Fontana, G., Pagliara, S., Puglisi, S., Scotton, P. (2004).
"Opere di sitemazione idraulico-forestale a basso impatto ambientale".
McGraw-Hill. Milano
[21] Gladki, H. (1979). "Resistance to flow in alluvional channels with coarse bed materials", J. Hydr. Res., 17 (2), 121-128.
[22] Griffiths, A. (1981). "Flow resistance in coarse gravel bed rivers", J.
Hydr. Div.., ASCE, 107 (7), 899-918.
[23] Guo, J. and Julien, P.Y.(2005). "Shear stress in smooth rectangular open- channel flows". J. Hydr. Div., ASCE, 131 (1), 30-37.
Moto uniforme su rampe in pietrame in condizioni di macroscabrezza
-2-
Bibliografia
[24] Herbich, J.B.and Shuilts, S. (1964). "Large-scale roughness in open channel flow". J. Hydr. Div., ASCE, 90 (6), 203-230.
[25] Hey, R. (1979), “Flow resistance in gravel-bed rivers”. J. Hydr. Div., ASCE, 105 (4), 365-379.
[26] Hughes, W. C. and Flack, E.J. (1984). "Hydraulic Jump properties over a rough bed". J. Hydr. Engrg., ASCE, 110 (12), 1755-1771.
[27] Jarrett, R.D. (1984), “Hydraulics of high-gradient streams”. J. Hydr.
Engrg., ASCE, 110 (11), 20-39.
[28] Kamphuis, J. W. (1974). "Determination of sand roughness for fixed beds", J. Hydr. Res., 12 (2), 193-203.
[29] Knight, D.W. And MacDonald, J.A. (1979). “Hydraulics resistance of artifical strip roughness”. J. Hydr. Div., ASCE, 105 (6), 675-690.
[30] Lawrence, D.S.L. (1997). “Macrosclae surface roughness and frictional resistance in overland flow”. Earth Surf. Process. Landforms, 22, 365- 382.
[31] Milano, V. "Costruzioni Idrauliche Vol.II". S.E.U., Pisa
[32] Ohotsu, I., Yasuda, Y. And Takahashi, M. (2004), “Flow characteristics of skimming flows in stepped channels”. J. Hydr. Engrg., ASCE, 130 (9), 860-868.
[33] Pagliara, S. and Chiavaccini, P. (2004), “Flow Resistance of rock chutes with protruding boulders”. J. Hydr. Engrg., ASCE, 132 (6), 545-552.
[34] Pagliara, S. and Chiavaccini, P. (2006), “Energy dissipation on block ramps”. J. Hydr. Engrg., ASCE, 132 (1), 1-7.
[35] Peruginelli, A. "Idraulica". S.E.U., Pisa.
[36] Pyle, R. and Novak, P. (1981). "Coefficientes of friction in conduits with large roughness", J. Hydr. Res., 19 (2), 119-140.
Moto uniforme su rampe in pietrame in condizioni di macroscabrezza
-3-
Bibliografia
[37] Rice, C.E., Kadavy, K.C.and Robinson, K.M. (1998). "Roughness of loose rock riprap on steep slopes". J. Hydr. Engrg., ASCE, 124 (2), 179-185.
[38] Smart, G. (2004). "An improved flow resistance formula". Proces.,River Flow 2004, Balkema, Rotterdam, The Netherlands, 259-263
[39] Smart, G.M., Duncan, M., Jwalsh, J.M. (2002). "Relatively rough flow resistance equations". J. Hydr. Engrg., ASCE, 128 (6), 568-578.
[40] Stosser, J., Rodi, W. and Jirka, G.H. (2004). "Large eddy simulation of flow over rough channel beds". Proces.,River Flow 2004, Balkema, Rotterdam, The Netherlands, 265-2271
[41] Thompson, S.M. and Campbell, P.L. (1979). "Hydraulics of a large channel paved with boulders", J. Hydr. Res., 17 (4), 341-354.
[42] Yen, B.C. (2002), “Open channel flow resistance”. J. Hydr. Engrg., ASCE, 128 (1), 20-39.
Moto uniforme su rampe in pietrame in condizioni di macroscabrezza