• Non ci sono risultati.

(1)Bibliography [1] Schr¨oder, D

N/A
N/A
Protected

Academic year: 2021

Condividi "(1)Bibliography [1] Schr¨oder, D"

Copied!
2
0
0

Testo completo

(1)

Bibliography

[1] Schr¨oder, D.

Elektrische Antriebe 1: Grundlagen. Springer Verlag, Berlin Heidelberg, 1994.

[2] Schr¨oder, D.

Elektrische Antriebe 2: Regelung von Antrieben. Springer Verlag, Berlin Heidelberg, 1995.

[3] Ned Mohan,Tore M. Undeland and william P. Robbins Power electronic

JOHN WILEY & SONS, INC

[4] Pekik A.Dahono, Slamet Riyadi, Ahmad Mudawari, and Yanuarsyah Haroen.

Output Ripple Analysis of Multiphase DC-DC Converters

IEEE 1999 International Conference on Power Electronics and Drive Systems, PEDS’99, Hong Kong.

[5] C. C. CHAN

The State of the Art of Electric and Hybrid Vehicles FELLOW, IEEE

[6] J¨org Walter and Rik W. De Donker

High Power Bi-Directional DC/DC Converter Topology For Future Automobilies Institute for Power Electronics and Electrical Drives (ISEA)

[7] Intersil Data Sheet

Multi-Purpose Precision Multi-Phase PWM Controller With Optional Active Voltage Positioning

[8] F. Caricchi, F. Crescimbini, A. Di Napoli

20 kW Water-Cooled Prototype of a Buck-Boost Converter Topology for Electrical Vehicle Motor Drives

University of Rome ”La Sapienza”- Department of Electrical Engineering 66

(2)

[9] Marian P. Kazmierkowski, R. Krishnan, Freole Blaabjerg Control in Power Electronics (select Problems)

[10] Bonifiglioli Riduttori S.p.a.

Manuale del Motoriduttore Springer

[11] Werner Leonhard

Control in Power Electronics Springer

[12] B.E. Taylor

Power Mosfet Design Wiley

[13] An´ıbal de Almeida, Paolo Bertoldi, Werner Leonhard

Energy Efficiency Improvements in Electric Motors and Drives Springer

Riferimenti

Documenti correlati

 Power strategy 1 (PS1): the boost converter is switched on around the stimulation period and is set up to drive the supply voltage quickly to the desired

In this paper, at first, a double Buck DC-DC converter in parallel with respective dual power switches is employed, in which by using the trapezoidal carrier phase shift driving,

4.2.2 Evaluation of the converter performance As the theoretical analysis has focused on obtaining the output voltage, the input current THD and the efficiency of the

In order for the DC-DC charger to meet our requirements we want a DC voltage from a solar panel to be able to be converted to a higher voltage level to be able

Global Maximum Power Point Tracking (MPPT) Technique in DC –DC Boost Converter Solar Photovoltaic Array Under Partially

In the figure 1.26 is shown the LTSPICE Half Bridge model, while in the figure 1.27 the Simulation result with a switching power source.. 1.26 Equivalent Thermal Model of Half

The main microcontroller Altium schematics are shown in Fig.3.29, in particular are reported: some measurements, the JTAG, the CAN interface, two Digital to Analog Converter (DAC),

L’apparecchio trasforma automaticamente la proprio configurazione da DOPPIO RAMO a SINGOLO RAMO con DUE UNITÀ IN PARALLELO solamente per il tempo che perdura il sovraccarico;