RECENT ADVANCES in APPLIED and THEORETICAL MECHANICS
Proceedings of the 11th International Conference on Applied and Theoretical Mechanics (MECHANICS '15)
Kuala Lumpur, Malaysia April 23-25, 2015
Scientific Sponsors
University Kebangsaan
Malaysia Universiti Teknologi
Malaysia University of Naples Federico II Italy
Mathematics and Computers in Science and Engineering Series | 45
ISSN: 2227-4588
ISBN: 978-1-61804-304-7
RECENT ADVANCES in APPLIED and THEORETICAL MECHANICS
Proceedings of the 11th International Conference on Applied and Theoretical Mechanics (MECHANICS '15)
Kuala Lumpur, Malaysia April 23-25, 2015
Published by WSEAS Press
www.wseas.orgCopyright © 2015, by WSEAS Press
All the copyright of the present book belongs to the World Scientific and Engineering Academy and Society Press. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the Editor of World Scientific and Engineering Academy and Society Press.
All papers of the present volume were peer reviewed by no less that two independent reviewers.
Acceptance was granted when both reviewers' recommendations were positive.
ISSN: 2227-4588
ISBN: 978-1-61804-304-7
RECENT ADVANCES in APPLIED and THEORETICAL MECHANICS
Proceedings of the 11th International Conference on Applied and Theoretical Mechanics (MECHANICS '15)
Kuala Lumpur, Malaysia
April 23-25, 2015
Editor:
Prof. Imre J. Rudas, Obuda University, Hungary Committee Members-Reviewers:
Hishamuddin Jamaluddin Intan Zaurah Mat Darus Vitale Cardone
Leonardo Cascini Domenico Guida Joseph Quartieri Stefano Riemma Gianfranco Rizzo Mario Vento
Cheng-Xian (Charlie) Lin Kumar Tamma
Pradip Majumdar M. Affan Badar Olga Martin
Anastasios Lyrintzis Cho W. Solomon To Harris Catrakis Gongnan Xie Seung-Bok Choi Jianqiao Ye Gongnan Xie Jan Awrejcewicz Yury A. Rossikhin Ottavia Corbi Jia-Jang Wu Giuseppe Carbone Gilbert-Rainer Gillich Kim Choon Ng Marina Shitikova Ahmet Selim Dalkilic Claudio Guarnaccia
Preface
This year the 11th International Conference on Applied and Theoretical Mechanics (MECHANICS '15) was held in Kuala Lumpur, Malaysia, April 23-25, 2015. The conference provided a platform to discuss plasticity, fracture, and damage mechanics, mechanics of nanomaterials, fluid-structure interaction, computational and experimental mechanics, manufacturing processes, mechatronics, aerodynamics and aeroelasticity etc. with participants from all over the world, both from academia and from industry.
Its success is reflected in the papers received, with participants coming from several countries, allowing a real multinational multicultural exchange of experiences and ideas.
The accepted papers of this conferences are published in this Book that will be sent to international indexes. They will be also available in the E-Library of the WSEAS. Extended versions of the best papers will be promoted to many Journals for further evaluation.
Conferences such as this can only succeed as a team effort, so the Editors want to thank the International Scientific Committee and the Reviewers for their excellent work in reviewing the papers as well as their invaluable input and advice.
The Editors
Table of Contents
Bounds from Below of the Bifurcation Load in Uniaxial Deformation 11 Pilade Foti, Aguinaldo Fraddosio, Salvatore Marzano, Mario Daniele Piccioni
A New Control Method of Suspension Force for Bearingless Brushless DC Motor 18 Long Shan, Huangqiu Zhu, Weiyu Zhang
Using of the Magnetic Pulse Method for Testing Materials Under the Influence of Microsecond Impacts in Different Loading Schemes
25 N. V. Korovkin, S. I. Krivosheev, S. G. Magazinov
On the Ultrasonic Analysis of Damage in GFRP Composites 32
Anna Castellano, Pilade Foti, Aguinaldo Fraddosio, Salvatore Marzano, Mario Daniele Piccioni
Robe’s Restricted Problem of 2+2 Bodies with Perturbations in the Coriolis and Centrifugal Forces in a Roche Ellipsoid-Oblate System
40 Bhavneet Kaur, Rajiv Aggarwal
Fractional Order Two Temperature Thermoelastic Properties of a Sandwich Ceramic Panel 52 E. Bassiouny, Zeinab Abouelnaga
Vulnerability Analysis of a Slender Building Made of Coupled Concrete and Masonry Materials 67 Mariella Diaferio, Dora Foti
Design of Streamline Dies for Drawing Driven by Fracture 73
Sergei Alexandrov, Yusof Mustafa, Elena Lyamina
Static Fracture Mechanisms of SS316 Austenitic Stainless Steel Strip Liners in Reactor Pressure Vessel (RPV)
77 M. A. Khattak, M. N. Tamin, S. Kazi, S. Badshah, Rafiullah Khan, Nida Iqbal
Grillage of Beam Elements for Stability Problems of Rectangular Plates Resting on Winkler Foundations
85 Abdulhalim Karasin, Murat Arda Ugurlu
On Self-Stress Design in Modular Tensegrity Grid Structures 95
Pilade Foti, Aguinaldo Fraddosio, Salvatore Marzano, Gaetano Pavone, Mario Daniele Piccioni
Behaviour of Precast Concrete Beam-to-Column Connections Using Steel Plate 105 Ahmad Baharuddin Abd. Rahman, Mohd Hafizi Mohd Akhir, Zuhairi Abd. Hamid
On the Response of R.C. Buildings to Near-Field Ground Motions 114 Mariella Diaferio, Dora Foti
On the spectral Properties of the Operators in the Models of Fluid Dynamics of the Ocean which Involve Heat and Salinity Transfer
120 Andrei Giniatoulline
Recent Advances in Applied and Theoretical Mechanics
ISBN: 978-1-61804-304-7 9
Ramped Temperature Effect on Unsteady MHD Natural Convection Flow Past an Infinite Inclined Plate in the Presence of Radiation, Heat Source and Chemical Reaction
126 M. Narahari, Sowmya Tippa, Rajashekhar Pendyala, M. Yunus Nayan
Modeling and Simulation of High Pressure Composite Cylinders in the Contact Area Internal and External
138 Emad Toma Karash
Initiation of Ductile Fracture at Different Stress States of Low Carbon and High-Strength Steel Sheets
144 Abdoulhdi A. Borhana, Mohd N. Tamin
Acougamic: Dynamic Acoustical Control 154
Mohamed Hussein, Nurul Farhanah Muarat, Raja Ishak Raja Hamzah, Zair Asrar Ahmad, Maziah Mohamed, Mohd Zarhamdy Md Zain, Norasikin Mat Isa
Concept of Effective Stress and Shear Strength Interaction in Rotational Multiple Yield Surface Framework and Volume Change Behaviour of Banting Clay
159 Mohd Jamaludin Md Noor, W. F. Anderson
Authors Index 169
Recent Advances in Applied and Theoretical Mechanics
ISBN: 978-1-61804-304-7 10
Authors Index
Abouelnaga, Z. 52 Khan, R. 77 Aggarwal, R. 40 Khattak, M. A. 77 Ahmad, Z. A. 154 Korovkin, N. V. 25 Akhir, M. H. M. 105 Krivosheev, S. I. 25 Alexandrov, S. 73 Lyamina, E. 73 Anderson, W. F. 159 Magazinov, S. G. 25 Badshah, S. 77 Marzano, S. 11, 32, 95 Bassiouny, E. 52 Mohamed, M. 154 Borhana, A. A. 144 Muarat, N. F. 154 Castellano, A. 32 Mustafa, Y. 73 Diaferio, M. 67, 114 Narahari, M. 126 Foti, D. 67, 114 Nayan, M. Y. 126 Foti, P. 11, 32, 95 Noor, M. J. M. 159 Fraddosio, A. 11, 32, 95 Pavone, G. 95 Giniatoulline, A. 120 Pendyala, R. 126 Hamid, Z. A. 105 Piccioni, M. D. 11, 32, 95 Hamzah, R. I. R. 154 Rahman, A. B. A. 105 Hussein, M. 154 Shan, L. 18 Iqbal, N. 77 Tamin, M. N. 77, 144 Isa, N. M. 154 Tippa, S. 126 Karash, E. T. 138 Ugurlu, M. A. 85 Karasin, A. 85 Zain, M. Z. M. 154
Kaur, B. 40 Zhang, W. 18
Kazi, S. 77 Zhu, H. 18
Recent Advances in Applied and Theoretical Mechanics
ISBN: 978-1-61804-304-7 169
