Briefing
Project of a system for the remote control of the vectorial networks analyser Wiltron 37311A.
Description: The program, based on the environment of development LabVIEW, allows, besides the management of the measure on the tool from a computer server, also the communication server- client in the two directions, so that the control of the tool can be assumed from the one or from the other.
The program allows both on the client and on the server, the visualization of the data, reproducing the present functions on the panel of the tool.
The values of the parameters S, is sent as log magnitude and phase, that is in their form more general, in such way that after the data have been received, every consumer them can represent in the wanted way.
The possible visualizations are: log magnitude, phase, smith chart of the impedances and the admittances, real part and imaginary part.
The parameters that can be planned on the vectorial analyser are instead: number of points in frequency, frequencies start and stop scanning, bandwidth of the filter IF and Average.
Note: The program server has shown some problems on the blocks of connection TCP/IP if it is installed it on a computer with operating system Windows XP.