565
Bibliografia Generale
[1]- C.R. Peterson, P.G. Hill, Mechanics and Thermodynamics of Propulsion, Addison –Wesley, 1992
[2]- J.P.Franc, J.M.Michel, Fundamentals of cavitation, Kluwer Academic Publishers, 2004 [3]- C.E. Brennen, Hydrodynamics of Pumps, Oxford University Press, 1994
[4]- C.E. Brennen, Cavitation and Bubble Dynamics, Oxford University Press, 1995.
[5]- W. Rosenmann, Experimental investigations of hydrodynamically induced shaft forces with
a three bladed inducer, Proc. ASME Symp. on Cavitation in Fluid Machinery, 1965.
[6]- B.Lakshminarayana, Fluid dynamics and heat transfer of turbomachinery, John Wiley & Sons , Inc, 1996.
[7]- R.H. Saberski, A.J. Acosta, E.G. Hauptmann, Fluid flow: a first course in fluid mechanics, MacMillan, 1971.
[8]- R.J. Franz, Experimental investigation of the effect of cavitation on the rotordynamic forces
on a whirling centrifugal pump impeller, Ph.D. Thesis, California Institute of Technology, 1989.
[9]- A. Bhattacharyya, Internal flows and force matrices in axial flow inducers, Ph.D. Thesis, California Institute of Technology, 1994.
[10]- A. Cervone, Progetto costruttivo definitivo di un impianto di prova in similitudine di
turbopopmpe cavitanti,Tesi di Laurea in Ingegneria Aerospaziale, Università di Pisa, 2000.
[11]- B.Jery, Experimental study of unsteady hydrodynamic force matrices on whirling
centrifugal pump impellers, Ph.D. Thesis, California Institute of Technology, 1987.
[12]- N. Saggini, Sistema di misura delle forze non stazionarie su giranti di turbopompe
cavitanti, Tesi di Laurea in Ingegneria Aerospaziale, Università degli Studi di Pisa, 2002.
[13]- A. Milani, Progetto e realizzazione di un impianto per prove rotodinamiche su
turbopompe, Tesi di Laurea in Ingegneria Aerospaziale, Università di Pisa, 2002.
[14]- L.Torre, Studio sperimentale delle prestazioni e delle instabilità fluidodinamiche di
cavitazione su un prototipo dell’induttore della turbopompa LOx del motore Vinci, Tesi di
Laurea in Ingegneria Aerospaziale, Università degli Studi di Pisa, 2003-2004
[15]- R. Testa , Studio sperimentale delle instabilità fluidodinamiche di cavitazione su un
induttore commerciale e sul MK1 della turbopompa LOX di ariane 5, Tesi di Laurea in
Ingegneria Aerospaziale, Università di Pisa, 2002-2003
[16]- J.S. Bendat, A.G. Piersol, Random data: analysis and measurement procedures, Wiley-Interscience, New York, 1971.
[17] D.E. Newland, An introduction to Random vibrations and spectral analysis, Longman, London, 1975.
[18]- M.Luise, G.M.Vitetta, Teoria dei segnali, MGraw-Hill, Milano,2003
[19]- R.S. Ruggeri, R.D. Moore, Method for prediction of pump cavitation performance for
various liquids, liquid temperatures and rotative speeds, NASA, TECHNICAL NOTE, 1969
[20]- S.H.Carpenter, Performance of cavitating axial inducers with varying tip clearance
and solidity, Thesis, In Partial Fulfillment of the Requirements for the Degree of
Bibliografia Generale
566
[21]- H.W. Emmons, C.E. Pearson H.P. Grant, Compressor surge and stall propagation, Trans. ASME, 79, 1955
[22]- E.M. Greitzer, The stability of pumping systems––the 1980 Freeman Scholar Lecture, ASME J. Fluid Eng., 103, 1981.
[23]- S. Leiblein, Experimental flow in two dimensional cascades , chapter VI in Aerodynamic
design of axial flow compressors, NASA SP-36, 1965.
[24]- H. Murai, Observations of cavitation and flow patterns in an axial flow pump at low flow
rates, Mem. Inst. High Speed Mech., Tohoku Univ., 24, No.246, 1968.
[25]- K. Kamijo, T. Shimura, M. Watanabe An experimental investigation of cavitating inducer
instability, ASME Paper 77-WA/FW-14, 1977.
[26]- W. Rosenmann, Experimental investigations of hydrodynamically induced shaft forces
with a three bladed inducer , Proc. ASME Symp. on Cavitation in Fluid Machinery, 1965.
[27] -Steven W. Smith,The Scientist and Engineer’s Guide to Digital Signal Processing , California Technical Publishing,1997.
[28]- Luca d’Agostino, Lucio Torre, Angelo Pasini, Damiano Baccarella, A. Cervone, Andrea Milani, A Reduced Order Model for Preliminary Design and Performance Prediction of Tapered
