POLITECNICO DI TORINO Repository ISTITUZIONALE

The resilience index of the community is then evaluated as the area under the final serviceability function using Equation 1... Hierarchical scheme of the

The possibility of melt spinning the prepared blends were assessed through melt flow index (MFI) tests; thermogravimetric (TG) analyses and cone calorimetry tests were exploited

Abstract—This paper presents a sensorless control technique based on direct flux vector control (DFVC) method for synchronous reluctance (SyR) motor drives fed by a three-phase

This study shows that the proposed approach may be quite effective in treating cancer patients, giving results similar to (or perhaps slightly better than) those provided by

To this aim, the coating reaction to heat or flame application is reported in Figure 7 where a FE-SEM micrograph of coating (5% APP/MTM)) before combustion (Figure 7a), SEM

The articles presented in the issue, sixteen in number, can be thematically categorized into seven titles which span an extended part of the multi-particle research discipline and

This paper develops a new technique where individual judgments – which are expressed in the form of partial preference orderings, including the more/less

Fatigue fracture surfaces of horizontal stress relieved and HIPped Ti-6Al-4V specimens (low oxygen content) observed by stereomicroscopy (a,b) and FESEM analysis (c,d): (a)