Testo completo
Virtex-II Field-Programmable Gate Array Family Members
Virtex-II Pro / Virtex-II Pro X FPGA Family Members
Virtex-4 FPGA Family Members
Virtex-E Field-Programmable Gate Array Family Members
Virtex Field-Programmable Gate Array Family Members
[2]
Summary of Spartan-3E FPGA Attributes
Summary of Spartan-3 FPGA Attributes
[2]
Spartan-IIE FPGA Family Members
Spartan-II FPGA Family Members
[2]
Spartan and Spartan-XL Field Programmable Gate Arrays
[2]
Documenti correlati
DOCUMENTI: Cap.3 ‐ Par.3.4
A spiral array (SA) was designed based on a 32×32 full array (FA); both SA and FA were simulated in Field II and their performance compared in terms of 3D one-way
The application server holds the following keys: (i) a local key, used for gate encryption; (ii) an average of v - 1 nonlocal keys, one key for each of the other application
We present a digital back-end designed for the Basic Element for SKA Training II (BEST-2) array at the Medicina radio telescopes.. This back-end is implemented on
Consequently, devices with a well design field plate gate have much higher output power density (up to 2- to 3 times) than that of a conventional gate while improving the power
The last step of the validation flow has been the prototyping on the Virtex-II development board from Memec of the Leon core featuring the I 2 C/SPI interface.. The development
Le prestazioni in questo caso sono limitate dal numero di gates che possiede ciascun FPGA e dalla frequenza di clock, così, per esempio un 200K gate della Virtex con una frequenza
The use of field-programmable gate arrays (FPGAs) and general pur- pose graphic processing unit (GP-GPU) as programmable accelerators can significantly increase the performance
