Possenti ,“Techniques to Control the Electricity Generation in a series Hybrid Electrical Vehicle”, IEEE Transaction on Energy Conversion, Vol.17, No

the see. 52 4.9 Flowchart of the action selection process. 55 4.11 Policy obtained just from the preliminary initialization. 57 4.12 Actual values and representing action of

Rebeiz, "Some Important Properties of Waveguide Junction Generalized Scattering Matrices in The Context of the Mode Matching Technique", IEEE Transaction on Microwave

Therefore, the objective of this work is to develop an Electricity and Heat Generation Assessment Index (EHGAI) suitable to be used in selecting the best WtE

In this article, we propose the exploitation of the high heat value of the Gorse trunks in the production of electric energy through gasification, evaluating its energetic

UPS control via CPU Voltage stabilization AVR Wide input tolerance Cold Start - Battery startup Autorestart - Automatic recovery Communication software and.. Shutdown management

Figure 2.12: Comparison between original data of Indian driving cycle (blue) and one step prediction computed with Multivariate Markov Chain procedure (red), which consider two

consumption of the system, for five cycles: a-two stages compression R410+CO2, b-transcritical one stage CO2, c-CO2 compression with the condenser cooled by water sprayed

Based on simulation and laboratory tests, the authors show that proper selection of control parameters allows operation of SRG with maximum efficiency, maximum power or maximum