[1] www.plasticseurope.org
[2] U.J. Hänggi, FEMS Microbiol. Rev., 16, 213 (1995).
[3] A.L. Brody, and K.S. Marsh, The Wiley Encyclopedia of Packaging Technology, John Wiley and Sons, Inc., N.Y., 110 (1997).
[4] R. Arshady, Biodegradable Polymers: Concepts, Criteria, Definitions, in Biodegradable Polymers, Citus Ltd., London, 1 (2003).
[5] D.L. Kaplan, J.M. Mayer, D. Ball, J. Mc Cassie, A.L. Allen, and P. Stenhouse, Biodegradable Polymers and Packaging, Technomic Publishing Company, Inc., Lancaster, 1 (1993).
[6] K. Sudesh, H. Abe, and Y. Doi, Prog. Polym. Sci., 25, 1503, (2000).
[7] A. Steinbuchel, Biomaterials, Byrom D, 125 (1991).
[8] Y. Doi, Microbial Polyester, VCH Publishers, New York, (1990).
[9] D. Byrom, Plastics From Microbes: Microbial Synthesis of Polymers and Polymer Precursors, Mobley DP, 5 (1994).
[10] http://inventabrasilnet.t5.com.br/plastico.htm.
[11] M. Lemoigne, Bull. Soc. Chim. Biol., 8, 770 (1926).
[12] L.L. Wallen, and W.K. Rohwedder, Environ. Sci. Technol., 8, 576 (1974).
[13] U.J. Hänggi, Pilot Scale Production of PHB with Alcaligens Latus. In: E.A.
Dawes, Novel Biodegradable Microbial Polymers, Kluwer, Dordrecht, 60 (1990).
[14] W.J. Page, FEMS Microbiol. Rev., 103, 149 (1992).
[15] T. Fukui, and Doi Y., Appl. Microbiol. Biotechnol., 49, 333 (1998).
[16] G. Eggink G, H. Van der Wal, G.N.M. Huijberts, and P. de Waard, Ind. Crops Prod., 1, 157 (1993).
[17] G. Eggink, P. de Waard, and G.N.M. Huijberts, Can. J. Microbiol. (Suppl), 41 (1), 14 (1995).
[18] I.K.P. Tan, K. Sudesh, M. Theanmalar, S.N. Gan, and B. Gordon, Appl.
Microbiol. Biotechnol., 47, 207 (1997).
[19] R.G. Lageveen, G.W. Huisman, H. Preusting, P. Ketelaar, G. Eggink, and B.
Witholt, Appl. Environ. Microbiol., 54, 2924 (1988).
[20] G.W. Huisman, O. Leeuwde, G. Eggink, and B. Witholt, Appl. Environ.
Microbiol., 55, 1949 (1989).
[21] A. J. Andersen, and E. A. Dawes, Microbiol. Rev., 54 (4), 450 (1990).
[22] S. Y. Lee, Biotechnol. Bioeng., 49, 1 (1996).
[23] C. Nawrath, Y. Poirier, and C. Somerville, Plastid Targeting of the Enzymes Required for the Production of Polyhydroxybutyrate in Higher Plants. In: Y. Doi, and K. Fukuda, Biodegradable Plastics and Polymers, Elsivier Science B.V., Amserdam, 136 (1994).
[24] Y. Poirier, D.E. Dennis, K. Klomparens, and C. Somerville, Science, 256, 520 (1992).
[25] Y. Poirier, C. Nawrath, and C. Somerville, Bio/technology, 13, 143 (1995).
[26] C. Nawrath, Y. Poirier, and C. Somerville, Proc. Natl. Acad. Sci., 91, 12760 (1994).
[27] P.J. Barham, A. Keller, E.L. Otun, and P.A. Holmes, J. Mater. Sci., 19, 2781 (1984).
[28] P.A. Holmes, Biologically Produced (R)-3-hydroxyalkanoate Polymers and Copolymers. In: D.C. Basset, Development in Crystalline Polymers, Vol 2, Elsevier, London, 1 (1988).
[29] E. Chiellini, E.G. Fernandes, M. Pietrini, and R. Solaro, Macromol. Symp. 197, 45 (2003).
[30] E.G. Fernandes, M. Pietrini, and E. Chiellini, Macromol. Symp. 218, 157 (2004).
[31] E.G. Fernandes, M. Pietrini, and E. Chiellini, Biomacromolecules. 5, 1200 (2004).
[32] B.L. Hurrell and R.E. Cameron, J. Mater. Sci., 33, 1709 (1998).
[33] G.J.M. de Koning, P.J. Lemstra, D.J.T. Hill, T.G. Carswell, and J.H. O'Donnell, Polymer, 33 (15), 3295 (1992).
[34] P. Yu, H. Chua, A. Huang, W. Lo, and G. Cheng, Appl. Biochem. Biotechnol., 70, 603 (1998).
[35] P.P. King, J. Chem. Technol. Biotechnol., 32, 2 (1982).
[36] Y. Aoyagi, K. Yamashita, and Y. Doi, Polym. Degrad. Stab., 76, 53 (2002).
[37] N. Grassie, E.J. Murray, and P.A. Holmes, Polym. Degrad. Stab., 6, 47 (1984).
[38] S. Nguyen, G. Yu, and R. Marchessault, Biomacromolecules, 3 (1), 219 (2002).
[39] A. Gonzalez, L. Irusta, M.J. Fernandez-Berridi, M. Iriarte, and J.J. Iruin, Polym.
Degrad. Stab., 87, 347 (2005).
[40] R.S. Lehrle, and R.J Williams, Macromolecules, 27, 3782 (1994).
[41] R.S. Lehrle, R.J. Williams,C. French, and T. Hammond, Macromolecules, 28, 4408 (1995).
[42] H. Nishida, and Y. Tokiwa, J. Appl. Polym. Sci., 46, 1467 (1992).
[43] R. Abate, A. Ballistreri, G. Montaudo, and G. Impallomeni, Macromolecules, 27, 332 (1994).
[44] M. Kunioka, and Y. Doi, Macromolecules, 23, 1933 (1990).
[45] A. Ballistreri, G. Montaudo, D. Garozzo, M. Giuffrida, and M.S. Montaudo, Macromolecules, 24, 1231 (1991).
[46] G. de Koning, Can. J. Microbiol., 41 (Suppl. 1), 303 (1995).
[47] S. Gogolewski, M. Jovanovic, and S.M. Perren, Polym. Degrad. Stab., 40, 313 (1993).
[48] D.H. Melik, and L.A. Schechtman, Polym. Eng. Sci., 35, 1795 (1995).
[49] R. Renstad, S. Karlsson, and A.C. Albertsson, Polym. Degrad. Stab., 57, 331 (1997).
[50] J. Mergaert, A. Webb, C. Anderson, A. Wouters, and J. Swings, Appl. Environ.
Microbiol., 59, 3233 (1993).
[51] Y. Doi, Y. Kanesawa, N. Tanahashi, and Y. Kumagai, Polym. Degrad. Stab., 36, 173 (1992).
[52] J. Mergaert, A. Wouters, C. Anderson, and J. Swings, Can. J. Microbiol., 41 (1), 154 (1995).
[53] D. Jendrossek, B. Muller, H.G. Schlegel, Eur. J. Biochem., 218, 701 (1993).
[54] B. Klingbeil, R. Kroppenstedt, and D. Jendrossek, FEMS Microbiol. Lett., 142, 215 (1996).
[55] K. Kasuya, Y. Inoue, T. Tanaka, T. Akehata, T. Iwata, T. Fukui, and Y. Doi, Appl.
Environ. Microbiol., 63, 4844 (1997).
[56] K. Kita, S. Mashiba, M. Nagita, K. Ishimaru, K. Okamoto, H. Yanase, and N.
Kato, Biochim. Biophys. Acta, 1352, 113 (1997).
[57] M. Shinomiya, T. Iwata, K. Kasuya, and Y. Doi, FEMS Microbiol. Lett., 154 (1), 89 (1997).
[58] C.S.K. Reddy, R. Ghai, and V. C. Kalia, Biores. Technol., 87, 137 (2003).
[59] B. Johnston, Far Eastern Econ. Rev., 147 (6), 62 (1990).
[60] N. Koyama, and Y. Doi, Macromolecules, (30), 826 (1997).
[61] C.W. Pouton, and S. Akthar, Advanced Drug Delivery Reviews, 18, 133, (1996).
[62] P.A. Holmes, Phys. Technol., 16, 32 (1985).
[63] R.A. Gross, and B. Kalra, Science, 297, 803 (2002).
[64] V. Oeding, H.G. Schlegel, Biochem. J., 134, 239 (1973).
[65] P.J. Senior, E.A. Dawes, Biochem. J., 134, 225 (1973).
[66] J.G. Wang, L.R. Bakken, Microb. Ecol., 35, 94 (1998).
[67] S.Y. Lee, TIBTECH, 14, 431 (1996).
[68] C.S. Ha, and W.J. Cho, Prog. Polym. Sci., 27, (759) 2002.
[69] M. Avella, and E. Martuscelli, Polymer, 29, 1731 (1988).
[70] Q.Q. Zhang, Y. Zhang, F.J. Wang, L.R. Liu, and C. Wang, J. Mater. Sci. Technol., 14 (1), 95 (1998).
[71] N. Koyama, and Y. Doi, Can. J. Microbiol., 41 (Suppl. 1), 316 (1995).
[72] H.A. Al-Salah, Polym. Bull., 41 (5), 593 (1998).
[73] G. Ceccorulli, M. Pizzoli, and M. Scandola, Macromolecules, 26, 6722 (1993).
[74] L.L. Zhang, X.M. Deng, S. Zhao, and Z.T. Huang, J. Appl. Polym. Sci., 65, 1849 (2000).
[75] M. Maekawa, R. Pearce, R.H. Marchessault, and R.S.J. Manley, Polymer, 40, 1501 (1999).
[76] M. Scandola, G. Ceccorulli, and M. Pizzoli, Macromolecules, 25, 6441 (1992).
[77] R. Pearce, J. Jesudason, W. Orts, R.H. Marchessault, and S. Bloembergen, Polymer, 33, 4647 (1992).
[78] S.J. Organ, and P.J. Barham, Polymer, 34 (3), 459 (1993).
[79] Y. Azuma, N. Yoshie, M. Sakurai, Y. Inoue, and R. Chujo, Polymer, 33, 4763 (1992).
[80] E. Blumm, and A.J. Owen Polymer, 36 (21), 4077 (1995).
[81] Y. Doi, K. Kasuya, H. Abe, N. Koyama, S. Ishiwatari, K. Takagi, and Y. Yoshida, Polym. Degrad. Stab., 51, 281 (1996).
[82] A. Cao, N. Asakawa, N. Yoshie, and Y. Inoue, Polym. J., 30 (9), 743 (1998).
[83] X.M. Deng, J.Y. Hao, M.L. Yuan, C.D. Xiong, and S.J. Zhao, Polym. Int., 50 (1), 37 (2001).
[84] A. Lisuardi, M. Schoenberg, R. Gada, A. Gross, and S.P. Mc Carthy, Polym.
Mater. Sci. Engng., 67, 298 (1992).
[85] S. Godbole, S. Gote, M. Latkar, and T. Chakrabarti, Biore. Technol., 86, 33 (2003).
[86] N. Lotti, and M. Scandola, Polym. Bull., 29, 407 (1992).
[87] M. Scandola, M. L. Focarete, G. Adamus, W. Silkorska, I. Baranowska, S.
Swierczek,, M. Gnatowski, M. Kowalczuk, and Z. Jedlinski, Macromolecules, 30 (9), 2568 (1997).
[88] P. Iriondo, J.J. Iruin, and M. Fernandez-Berride, Polymer, 36 (16), 3235 (2000).
[89] H. Marand, and M. Collins, Poly. Prep., 31, 552 (1990).
[90] P. Greco, and E. Martuscelli, Polymer, 30, 1475 (1989).
[91] E.D. Paglia, P.L. Beltrame, M. Cannetti, A. Seves, B. Marcanall, and E.
Martuscelli, Polymer, 34 (5), 996 (1993).
[92] J.C. Lee, K. Nahajima, T. Ikehara, and T. Nishi, J. Polym. Sci., Part B, Polym.
Phys., 35 (16), 2645 (1997).
[93] L.L. Zhang, S.H. Gosh, S.Y. Lee, and G.R. Hee, Polymer, 41, 1429 (2000).
[94] N. Lotti, M. Pizzoli, M. Ceccorulli, and M. Scandola, Polymer, 34 (23), 4935 (1993).
[95] P.X. Xing, X. Ai, L.S. Dong, and Z.L. Feng, Macromolecules, 31 (20), 6898 (1998).
[96] F. Gassner, and A.J. Owens, Polymer, 33 (12), 2508 (1992).
[97] P.B. Dave, M. Parikh, M. Reeve, S.P. Gross, and S.P. Mc Carthy, Polym. Mater.
Sci. Eng., 63, 726 (1990).
[98] A.A. Ol'khov, A.L. Iordanski, I.O. Litvino, and S.V. Vlasov, Polym. Plast.
Technol. Eng., 39 (5), 783 (2000).
[99] USA Patent 5, 135, 966, (1992).
[100] P.B. Dave, S.P. Gross, and S.P. Mc Carthy, Antec 90, SPE, Tech. Papers, 36, 1439 (1990).
[101] M. Avella, E. Martuscelli, G. Orsello, M. Raimo, and B. Pascucci, Polymer, 38, 6135 (1997).
[102] P.B. Dave, N.J. Ashar, R.A. Gross, and S.P. McCarthy, Polym. Prepr., 31 (1), 442 (1990).
[103] S. Choe, Y. Cha, H.S. Lee, J.S. Yoon, and H.J. Choi, Polymer, 36 (26), 4977 (1995).
[104] S.K. Misra, S.P. Valappil, I. Roy, and A.R. Boccaccini, Biomacromolecules, 7 (8), 2249 (2006).
[105] D.A. Wahl, J.T. Czernuszka, Eur. Cells Mater., 11, 43 (2006).
[106] J. Ni, and M. Wang, Mater. Sci. and Eng. C, 20, 101 (2002).
[107] L.J. Chen, and M. Wang, Biomaterials, 23, 2631 (2002).
[108] N. Galego, C. Rozsa, R. Sanchez, J. Fung, A. Vazquez, J. S. Tomas, Polym. Test, 19, 485 (2000).
[109] J.C. Knowles, G.W. Hastings, H. Ohta, S. Niwa, and N. Boeree, Biomaterials, 13, 491 (1992).
[110] Z.B. Luklinska, and W. Bonfield, J. Mater. Sci.: Mater. Med., 8, 379 (1997).
[111] C. Doyle, E.T. Tanner, and W. Bonfield, Biomaterials, 12, 841 (1991).
[112] Y.W. Wang, O. Wu, J. Chen, G.Q. Chen, Biomaterials, 26, 899 (2005).
[113] H. Li, R. Du, and J. Chang, J. Biomater. Appl., 20, 137 (2005).
[114] S. Sinha Ray, and M. Okamoto, Prog. Polym. Sci., 28, 1539 (2003).
[115] S.W. Brindly, and G. Brown, Crystal Structure of Clay Minerals and Their X-ray Diffraction, Mineralogical Society, London (1980).
[116] P. Aranda, and E. Ruiz-Hitzky, Chem. Mater., 4, 1395 (1992).
[117] C.W. Fran Francis, Soil Sci., 115, 40 (1973).
[118] A. Blumstein. J. Polym. Sci. A, 3, 2665 (1965).
[119] P.B. Messersmith, and E.P. Giannelis, J. Polym. Sci Part. A Polym. Chem., 33, 1047 (1995).
[120] A. Usuki, M. Kawasumi, Y. Kojima, A. Okada, T. Kurauchi, and O. Kamigaito, J.
Mater. Res., 8, 1174 (1993).
[121] Y. Kojima, A. Usuki, M. Kawasumi, A. Okada, Y. Fukushima, T. Kurauchi, J.
Mater. Res., 8, 1185 (1993).
[122] R.A. Vaia, H. Ishii, and E.P. Giannelis, Chem. Mater., 5, 1694 (1993).
[123] R.A. Vaia, and E.P. Giannelis, Macromolecules, 30, 8000 (1997).
[124] S. Sinha Ray, and M. Okamoto, Prog. Polym. Sci., 50, 962 (2005).
[125] P. Maiti, C.A. Batt, and E.P. Giannelis EP, Polym. Mater. Sci. Eng., 88, 58 (2003).
[126] S. Sinha Ray, K. Yamada, M. Okamoto, Y. Fujimoto, A. Ogami, K. Ueda, Polymer, 44, 6633 (2003).
[127] S.T. Lim, Y.H. Hyun, C.H. Lee, and H.J. Choi, J. Mater. Sci. Lett., 22, 299 (2003).
[128] J.E. Gardolinski, L.C.M. Carrera, M.P. Cantao, and F. Wypych, J. Mater. Sci., 35, 3113 (2000).
[129] S. Wang, C. Song, G. Chen, T. Guo, J. Liu, B. Zhang, and S. Takeuchi, Polym.
Deg. Stab., 87, 69 (2005).
[130] W.M. Choi, T.W. Kim, O.O. Park, Y.K. Chang, nd J.W. Lee, J. Appl. Polym. Sci., 90, 525 (2003).
[131] G.X. Chen, G.J. Hao, T.Y. Guo, M.D. Song, and B.H. Zhang, J. Mater. Sci. Lett., 21, 1587 (2002).
[132] G.X. Chen, G.J. Hao, T.Y. Guo, M.D. Song, and B.H. Zhang, J. Appl. Polym. Sci., 93, 655 (2004).
[133] A.K. Bledzki, J. Izbicka, and J. Gassan, Kunststoffe-Umwelt-Recycling, Stettin, Poland, 27 – 29 September 1995.
[134] G.C. Ellison, and R. McNaught, The Use of Natural Fibres in Nonwoven Structures for Applications as Automotive Component Substrates, Ministry of Agriculture Fisheries and Food Agri-Industrial Materials, London, (2000).
[135] W. Wittig, Kunststoffe im Automobilbau, VDI-Verlag, Dusseldorf, (1994).
[136] K.P. Mieck, and T. Reßmann, Kunststoffe, 85 (3), 366 (1995).
[137] A.K. Bledzki, and J. Gassan, Prog. Polym. Sci., 24, 221 (1999).
[138] J. Gassan, and A.K. Bledzki, Die Angew. Makromol. Chem., 236, 129 (1996).
[139] H.P. Fink, J. Ganster, and J. Fraatz, Akzo-Nobel Viskose Chemistry Seminar Challenges In Cellulosic Man-made Fibres, Stockholm, 30 May – 3 June 1994.
[140] A.J. Michell, Wood Cellulose-Organic Polymer Composites, Composite Asia Pacific, Adelaide, Vol. 89, 19 – 21 June 1989.
[141] K.K. Chawla, and A.C. Bastos, 3rd International Conference on Mechanical Behaviour of Materials, Cambridge, August 1979.
[142] T.M. Maloney. In: S.M. Lee, and R.M. Rowell, International Encyclopedia of Composites, VCH Publishers, New York, 656 (1995).
[143] J. Gassan, and A.K. Bledzki, 6. Internationales Techtexil Symposium 1994, Frankfurt, 15 – 17 July 1994.
[144] E.W. Wuppertal, Die Textilen Rohstoffe, Dr. Spohr-Verlag, Frankfurt (1981).
[145] T.P. Nevell, and S.H. Zeronian, Cellulose Chemistry and its Applications, Wiley, New York (1985).
[146] D. Klemm, B. Heublein, H.P. Fink, and A. Bohn, Angew. Chem. Int. Ed., 44, 3358 (2005).
[147] G.E. Kritschewsky, Chemische Technology von Textilmaterialien, Legprombitisdat, Moskau (1985).
[148] A. Tejado, C. Peña, J. Labidi, J.M. Echeverria, and I. Mondragon, Biores.
Technol., 98, 1655 (2007).
[149] E. Adler, Wood Sci. Technol,, 11, 169 (1977).
[150] J. Gassan, and A.K. Bledzki, 7 Internationales Techtexil Symposium 1995, Frankfurt, 20 – 22 June 1995.
[151] S.H. Zeronian, H. Kawabata, and K.W. Alger, Text. Res. Inst., 60 (3), 179 (1990).
[152] S.C.O. Ugbolue, Text. Inst., 20 (4), 41 (1990).
[153] J.I. Kroschwitz, Polymers: Fibres and Textiles, Wiley, New York (1990).
[154] V.V. Safonov, Treatment of Textile Materials, Legprombitizdat, Moscow (1991).
[155] D.S. Varma, M. Varma, and I.K. Varma, Text. Res. Inst., 54, 349 (1984).
[156] S. Sreenivasan, P. Bahama Iyer, and K.R. Krishna Iyer, J. Mater. Sci., 31, 721 (1996).
[157] H.S.S. Sharma, T.W. Fraser, D. McCall, and G.J. Lyons, Text. Inst., 86, 539 (1995).
[158] B.S. Westerlind, and J.C. Berg, J. Appl. Polym. Sci., 36, 523 (1988).
[159] M.N. Belgacem, P. Bataille, and S. Sapieha, J. Appl. Polym. Sci., 53, 379 (1994).
[160] M.J. Schick, Surface Characteristics of Fibres and Textiles - Part II, Marcel Dekker, New York (1977).
[161] D. Maldas, B.V. Kokta, and C. Daneaulf, J. Appl. Polym. Sci., 37, 751 (1989).
[162] R.A. Shanks, A. Hodzic, and S. Wong, J. Appl. Polym. Sci., 91 (4), 2114 (2004).
[163] S. Wong, R. Shanks, A. Hodzic, Macromol. Mater. Eng., 287, 647 (2002).
[164] E.G. Fernandes, E. Chiellini, A.Y. Rodriguez, and S.S. Miyazaki, IV International Symposium on Natural Polymers and Composites ISNAPOL, 1-4 September 2002.
[165] S. Peterson, K. Jayaraman, and D. Bhattacharyya, Composites Part A: Appl. Sci.
Manuf., 33, 1123 (2002).
[166] M. Avella, G. La Rota, E. Martuscelli, M. Raimo, P. Sadocco, G. Elegir, and R.
Riva, J. Mater. Sci., 35, 829 (2000).
[167] A.K. Mohanty, M.A. Khan, S. Sahoo, and G. Hinrichsen, J. Mater. Sci., 35, 2589 (2000).
[168] A.K. Mohanty, M.A. Khan, and G. Hinrichsen, Comp. Sci. Techn., 60, 1115 (2000).
[169] S. Luo, and A.N. Netravali, J. Mater. Sci., 34, 3709 (1999).
[170] D. Dubief, E. Samain, and A. Dufresne, Macromolecules, 32, 5765 (1999).
[171] A. Dufresne, M.B. Kellerhals, and B. Witholt, . Macromolecules, 32, 7396 (1999).
[172] M. Wollerdorfer, and H. Bader, Ind. Crop Prod., 8, 105 (1998).
[173] V.E. Reinsch, and S.S. Kelley, J. Appl. Polym. Sci., 64, 1785 (1997).
[174] P. Gatenholm, and A. Mathiasson, J. Appl. Polym. Sci., 51, 1231 (1994).
[175] M. Avella, E. Martuscelli, B. Pascucci, M. Raimo, B. Focher, and A. Marzetti, J.
Appl. Polym. Sci., 49, 2091 (1993).
[176] P. Gatenholm, J. Kubat, and A. Mathiasson, J. Appl. Polym. Sci., 45, 1667 (1992).
[177] M. Shibata, K. Takachiyo, K. Ozawa, R. Yosomiya, and H. Takeishi, J. Appl.
Polym. Sci., 85, 129 (2002).
[178] S.G. Lee, S.S. Choi, W.H. Park, and D. Cho, Macromol. Symp., 197, 89 (2003).
[179] R.A. Shanks, A. Hodzic, and S. Wong, J. Appl. Polym. Sci., 91, 2114 (2004).
[180] International Standard Organisation (ISO), Environmental Management – Life Cycle Assessment – Principles and Framework ISO 14040, (1997).
[181] H. Baumann, and A.M. Tillman, The Hitch Hiker’s Guide to LCA, Studentlitteratur AB, Lund (2004).
[182] E. Nieuwlaar, E. Marsili, and M.K. Patel, Short Course on Nanostructured Polymer Materials: Characterisation and Applications, Prague, 9-10 November 2005.
[183] J.B. Guinèe, M. Gorrè, R. Heijungs, G. Huppes, R. Klejin, A. de Koning, L.van Oers, A.W. Sleeswijk, S. Suh, H.A. Udo de Haes, Life Cycle Assessment An Operational Guide to the ISO Standards, Ministry of Housing, Spatial Planning and the Environment (VROM) and centre of Encironmental Science – Leiden University (CML), Final report, May 2001.
[184] International Standard Organisation (ISO), Environmental Management – Life Cycle Assessment – Goal and Scope Definition and Inventory Analysis ISO 14041, (1998).
[185] International Standard Organisation (ISO), Environmental Management – Life Cycle Assessment – Life Cycle Impact Assessment ISO 14042, (2000).
[186] International Standard Organisation (ISO), Environmental Management – Life Cycle Assessment – Life Cycle Interpretation ISO 14043, (2000).
[187] E. Nieuwlaar, Life Cycle Assessment and Energy Systems. In: E. Nieuwlaar, M.
Junginger G. Nieuwdorp, and M.K. Patel, Life Cycle Assessment/Technology Assessment, Utrecht University, Utrecht (2004).
[188] Scientific Applications International Corporation (SAIC), Life Cycle Assessment:
Principles and Practice, National Risk Management Research Laboratory, Office of Research and developement, Cincinnati, Ohio, May 2006.
[189] J.B. Guinèe, Handbook on Life Cycle Assessment – Opreational Guide to the ISO Standards, Kluwer Academic Publishers, Dordrecht (2002).
[190] E.T.H. Vink, K.R. Rábago, D.A. Glassner, and P.R. Gruber, Polym. Deg. Stab., 80, 403 (2003).
[191] M. Akiyama, T. Tsuge, Y. and Doi, Polym. Deg. Stab., 80, 183 (2003).
[192] S. Kim, and B.E. Dale, Int. J. LCA, 10 (3), 200 (2005).
[193] T.U. Gerngross, Nat. Biotech., 17, 541 (1999).
[194] M. Heyde, Polym. Deg. Stab., 59, 3 (1998).
[195] T.U. Gerngross, and S.C. Slater, Sci. Am., 283, 36 (2000).
[196] S.M. Lloyd, and L.B. Lave, Environ. Sci. Technol., 37, 3458 (2003).
[197] K. Wotzel, R. Wirth, and M. Flake, Angew. Makromol. Chem., 272, 121 (1999).
[198] W.P. Schmidt, and H.M. Beyer, Proceedings of the Total Life Cycle Conference of SAE in Graz, 251(1998).
[199] J. Diener, and U. Siehler, Angew. Makromol. Chem., 272, 4 (1999).
[200] T. Corbiere-Nicollier, B. Gfeller Laban, L. Lundquist, Y. Leterrier, J.A.E.
Manson, and O. Jolliet, Res. Cons. Recycl., 33, 267 (2001).
[201] S.V. Joshi, L.T. Drzal, A.K. Mohanty, and S. Arora, Composites: Part A, 35, 371 (2004).
[202] G. Frisoni, M. Baiardo, and M. Scandola, Biomacromolecules, 2, 476 (2001).
[203] C. Zhao, H. Qin, F. Gong, M. Feng, S. Zhang, and M. Yang, Polym. Deg. Stab., 87, 183 (2005).
[204] E. Samios, R.K. Dart, and J.V. Dawkins, Polymer, 38 (12), 3045 (1996).
[205] B. Jacques, J. Devaux, R. Legras, and E. Nield, Polymer, 38 (21), 5367 (1997).
[206] N. Grassie, E.J. Murray, and P.A. Holmes, Polym. Deg. Stab., 6 (2), 95 (1984).
[207] N. Grassie, E.J. Murray, and P.A. Holmes, Polym. Deg. Stab., 6 (3), 127 (1984).
[208] Plast. Add. Comp., 1 (4), 24 (1999).
[209] I. Takahashi, H. Iida, and K. Yanagisawa, Patent No. US 20050054755A1.
[210] C.S. Schollenberger, and F.D. Stewart, Die Angew. Makromol. Chem., 29/30, 413 (1973).
[211] F. Kurzer, and K. Douraghi Zadeh, Chem. Rev., 67 (2), 107 (1967).
[212] S. Bayari, F. Severcan, I. Gursel, V. Hasirci, and G. Alaeddinoglu, The FTIR Studies of the Poly(3-hydroxybutyrate) and Poly(30hydroxybutyrate-co-3- hydroxyvalerate). In: P.I. Harris, and D. Chapman, New Biomedical Materials, IOS Press, Amsterdam, 58 (1998).
[213] R.M. Silverstein, F.X. Webster, Identificazione Spettroscopica di Composti Organici, I Ed. Italiana, Casa Editrice Ambrosiana, Milano (1999).
[214] M. Morssli, G. Cassanas, L. Bardet, B. Pauvert, and A. Terol, Spectrochim. Acta., 47A (5), 529 (1991).
[215] J. Xu, B.H. Guo, R. Yang, Q. Wu, G.Q. Chen, and Z.M. Zhang, Polymer, 43, 6893 (2002).
[216] K.S. Seo, and J.D. Cloyd, J. Appl. Polym. Sci., 42, 845 (1991).
[217] H. Kliesch, T. Kiehne, F. Hora, and I. Fischer, Patent No. US 20030219614A1.
[218] H.D. Stroud Jr., and P.R. Cadmus, Patent No. US 006069204A.
[219] B.A.P. Ass, M.N. Belgacem, and E. Frollini, Carbohydr. Polym., 63, 19 (2006).
[220] V. Tserki, N.E. Zafeiropoulos, F. Simon, and C. Panayiotou, Composites: Part A, 36, 1110 (2005).
[221] M.H. Nassar, E.A. Ashour, and S.S. Wahid, J. Appl. Polym. Sci., 61, 885 (1996).
[222] J.X. Sun, X.F. Sun, R.C. Sun, P. Fowler, and M.S. Baird, J. Agric. Food. Chem., 51, 6719 (2003).
[223] R.G.P. Viera, G. Rodrigues Filho, R.M.N. de Assunção, C. da S. Meireles, J.G.
Vieira, and G.S. de Oliveira, Carbohydr. Polym., 67, 182 (2007).
[224] C.A.S. Hill, H.P.S. Abdul Khalil, and M.D. Hale, Ind. Crop. Prod., 8, 53 (1998).
[225] V. Tserki, P. Matzinos, S. Kokkou, and C. Panayiotou, Composites: Part A, 36, 965 (2005).
[226] S. Thiebaud, and M.E. Borredon, Biores. Technol., 52, 169 (1995)
[227] N.E. Zafeiropoulos, D.R. Williams, C.A. Baillie, and F.L. Matthew, Composites:
Part A, 33, 1083 (2002).
[228] R.C. Sun, and X.F. Sun, Ind. Crop. Prod., 16, 225 (2002).
[229] G. Rodrigues Filho, S.F. da Cruz, D. Pasquini, D.A. Cerqueira, V. de Souza Prado, and R.M. Nascimento de Assunção, J. Membr. Sci., 177, 225 (2000).
[230] S.Y. Oh, D.I. Yoo, Y. Shin, H.C. Kim, H.Y. Kim, Y.S. Chung, W.H. Park, and J.H. Youk, Carbohydr. Res., 340, 2376 (2005).
[231] L. Segal, J.Creely, and C.M. Conrad, Text. Res., 29, 786 (1959).
[232] M. Das, and D. Chakraborty, Ind. Eng. Chem. Res., 45, 6489 (2006).
[233] X.F. Sun, R.C. Sun, and J.X. Sun, Biores. Technol., 95, 343 (2004).
[234] J.X. Sun, X.F. Sun, H. Zhao, and R.C. Sun, Polym. Deg. Stab., 84, 331 (2004).
[235] D. Ray, B.K. Sarkar, R.K. Basak, and A.K. Rana, J. Appl. Polym. Sci., 45, 2594 (2002).
[236] M.L. Hassan, R.M. Rowell, N.A. Fadl, S.F. Yacoub, and A.W. Christiansen, J.
Appl. Polym. Sci., 76, 561 (2000).
[237] M.L. Hassan, N.A. El-Wakil, and M.Z. Sefain, J. Appl. Polym. Sci., 79, 1965 (2001).
[238] X.F. Sun, R.C. Sun, J.X. Sun, J. Agric. Food. Chem., 50, 6428 (2002).
[239] W. Horeau, W.G. Trinidade, B. Siegmund, A. Castellan, and E. Frollini, Polym.
Deg. Stab., 86, 567 (2004).
[240] L.E. Nielsen, and R.F. Landel, Mechanical Properties of Polymers and Composites, 2rd Ed; Marcel Dekker, Inc.: New York, 1994.
[241] S. Bruckner, S.V. Meille, L. Malpezzi, A. Cesaro, L. Navarini, and R. Tombolini, Macromolecules, 21, 967 (1988).
[242] D.W. Callister, Ciência e Engenharia de Materiais, LTC Editora, Rio de Janeiro (2002).
[243] N.J. Calos, and C.H.L. Kennard, Polymer, 35 (21), 4595 (1994).
[244] L.M. Oliveira, E.S. Araujo, and S.M.L. Guedes, Polym. Deg. Stab., 91, 2157 (2006).
[245] Z. Skrbic, and V. Divjakovic, Polymer, 37 (3), 505 (1996).
[246] S. Bloembergen, D.A. Holden, G.K. Hamer, T.L. Bluhm, and R.H. Marchessault, Macromolecules, 19, 2865 (1986).
[247] G. YU, and R.H. Marchessault, Polymer, 41, 1087 (2000).
[248] A. Fraga, R.A. Ruseckaite, and A. Jimenez, Polym. Test., 24, 526 (2005).
[249] S. Singh, and A.K. Mohanty, Compos. Sci. Technol., in press.
[250] L.A. Pothan, Z. Oommen, and S. Thomas, Compos. Sci. Technol., 63, 283 (2003).
[251] J.M. Faulstich de Paiva, and E. Frollini, Macromol. Mater. Eng., 291, 405 (2006).
[252] K.NE. Verghese, R.E. Jensenb, J.J. Leskoa, and T.C. Ward, Polymer, 42 (4), 1633 (2001).
[253] M. Baiardo, E. Zini, and M. Scandola, Composites: Part A, 35, 703 (2004).
[254] M.A. Paul, M. Alexandre, P. Degée, C. Henrist, A. Rulmont, and P. Dubois, Polymer, 44 (2), 443 (2003).
[255] F. Miller, and C.H. Wilkins, Anal. Chem., 24, 1253 (1952).
[256] W. Ijdo, S. Kemnetz, W.Mardis, and D. Benderly, USA Patent no. US 2006/0292697 A1, Dec. 28, 2006.
[257] M.A.J. Huijbregts, L.J.A. Rombouts, S. Hellweg, R. Frischknecht, A.J. Hendriks, D. Van de Meent, A.M.J. Ragas, L. Reijnders, and J. Struijss, J. Environ. Sci.
Technol., 40, 641 (2006).
[258] R. Frischknecht, and M. Faist Emmenegger, Strommix und Stromnetz. In:
Sachbilanzen von Energiesystemen: Grundlagen für den ökologischen Vergleich von Energiesystemen und den Einbezug von Energiesystemen in Ökobilanzen für die Schweiz, Final report ecoinvent 2000 No. 6, Paul Scherrer Institut Villigen, Swiss Centre for Life Cycle Inventories, Duebendorf, 2003.
[259] M. Leet Socolof, G.J. Overly, L.E. Kincaid, and J.R. Geibig, Desktop Computer Displays: A Life-Cycle Assessment - Volume 1, Center for Clean Products and Clean Technologies, University of Tennessee, Knoxville, 2001.
http://www.epa.gov/dfe/pubs/comp-dic/lca/index.htm.
[260] A Material of Choice for the Automotive Industry. PlasticsEurope, Brussels, 1999.
http://www.plasticseurope.org/Content/Default.asp?pageid=89.
[261] MatWeb - Material Property Data. http://www.matweb.com/index.asp?ckck=1.
[262] M.F. Ashby, Materials selection in Mechanical Design, 3rd Ed, Elsevier Butterworth-Heinemann, Burlington, 2005.
[263] L. Roes, E. Marsili, E. Nieuwlaar, and M.K. Patel, in preparation
[264] M.K. Patel, M. Crank, V. Dornburg, B. Hermann, L. Roes, B. Hysing, L. van Overbeek, F. Terragni, and E. Recchia, Medium and Long-Term Opportunities and Risks of the Biotechnological Production of Bulk Chemicals from Renewable Resources - The BREW Project, Prepared Under the European Commission's GROWTH Programme (DG Research), 2006. http://www.chem.uu.nl/brew/.
[265] D. Phylipsen, M. Kerssemeeckers, K. Blok, M.K. Patel, and J. de Beer, Clean Technologies in the Materials Sector - Current and Future Environmental Performance of Material Technologies, Report Commissioned by European Commission’s Institute for Prospective Technological Studies (IPTS), Ecofys, Department of Science, Technology and Society, Utrecht University, Utrecht, 2002.
[266] N. Jungbluth, Glass Fibre Reinforced Plastic Products. In: Life Cycle Inventories of Building Products, Final Report Ecoinvent 2000 No. 7, EMPA Duebendorf, Swiss Centre for Life Cycle Inventories, Duebendorf, 2003.
[267] I.C. Macedo, M.R.L.V. Leal, and J.E.A.R. da Silva, Assessment of Greenhouse Gas Emissions in the Production and Use of Fuel Ethanol in Brazil, Nucleo Interdisciplinar de Planejamento Energetico da Universitade Estadual de Campinas, Campinas, and Centro de Tecnologia Copersucar, Piracicaba, 2004.
http://www.unica.com.br/i_pages/files/gee3.pdf.
[268] I. Boustead, Eco-Profiles of the European Plastics Industry: Polypropylene (PP), PlasticsEurope, Brussels, 2005.
http://www.plasticseurope.org/content/default.asp?PageID=392#.
[269] I. Boustead, Eco-Profiles of the European Plastics Industry: Polystyrene (High Impact) (PS), PlasticsEurope, Brussels, 2005.
http://www.plasticseurope.org/content/default.asp?PageID=392#.
[270] I. Boustead, Eco-Profiles of the European Plastics Industry: Polypropylene Injection Moulding, PlasticsEurope, Brussels, 2005.
http://www.plasticseurope.org/content/default.asp?PageID=392#.
[271] M. Spielmann, T. Kagi, P. Stadler, and O. Tietje, Life Cycle Inventories of Transport Services, Report Ecoinvent 2004 No. 14, Swiss Centre for Life Cycle Inventories, Duebendorf, 2004.
[272] T. Gutowski, J. Dahmus, and A. Thiriez, 13th CIRP International Conference on Life Cycle Engineering, 2006, Leuven.
[273] L.A.J. Joosten, Process Data Description for the Production of Synthetic Organic Materials, Department of Science, Technology and Society, Utrecht University, The Netherlands, 1998.
