Riferimenti normativi

(1)

152

Bibliografia

Alderighi E., Bayo E., Bianco L., Braconi A., Coscetti C., Dall’Asta A., Filippuzzi P., Fulop L., Gracia J., Hoffmeister B., Hradil P., Karamanos S., Leoni G., Mallardo R., Moller S., Osta A., Salvatore W., Tsintzos P., Varelis G., Vasilikis D. (2010) - PREfabriCAted STEEL structures for low-rise buildings in seismic areas, RFSR-CT-2007-00038 project – Final Report, European Commission, Brussels.

Banushi G. (2010) - Un modello semianalitico del comportamento meccanico di un dissipatore autocentrante per la protezione sismica delle strutture, Tesi di Laurea, Facoltà di Ingegneria, Università di Pisa.

Braconi A., Morelli F., Salvatore W. (2012) - Development, design and experimental validation of a steel self-centering device (SSCD) for seismic protection of buildings, Bulletin of Earthquake Engineering 10 (6), 1915-1941.

Chioccarelli E., De Luca F., Iervolino I. (2012a) - Preliminary study of Emilia (May 20^th 2012) earthquake ground motion records v2.1, http://www.reluis.com.

Chioccarelli E., De Luca F., Iervolino I. (2012b) - Preliminary study of Emilia (May 29^th 2012) earthquake ground motion records v1.0, http://www.reluis.com.

Choi H. et al. (2008) - Comparison of the seismic response of steel buildings incorporating self-centering energy dissipative braces, buckling restrained braced and moment resisting frames, 14^th World Conference on Earthquake Engineering, 12-17 ottobre 2008, Pechino.

Chopra A.K. (2007) - Dynamics of Structures: Theory and Applications to Earthquake Engineering, Prentice Hall, New Jersey.

Chopra A.K., Goel R.K. (1999) - Capacity-Demand-Diagram methods based on Inelastic Design Spectrum, Earthquake Spectra 15 (4).

(2)

153

Chou C.-C., Chen J.-H. (2010) - Column restraint in post-tensioned self-centering moment frames, Earthquake Engineering and Structural Dynamics 39 (7), 751-774.

Christopoulos C., Filiatrault A. (2006) - Principles of passive supplemental damping and seismic isolation, IUSS Press, Pavia.

Christopoulos C., Filiatrault A., Folz B., Uang C.M. (2002) - Post-tensioned energy dissipating Connections for moment resisting steel frames, ASCE Journal of Structural Engineering 128 (9), 1111-1120.

Christopoulos C., Tremblay, R., Kim, H., Lacerte, M. (2008) - Self-Centering Energy Dissipative Bracing System for the Seismic Resistance of Structures: Development and Validation, ASCE Journal of Structure Engineering 134, Special Issue: Design and Analysis of Structures with Seismic Damping Systems, 96-107.

Computers and Structures Inc. (2011) - CSI Analysis Reference Manual For SAP2000®, ETABS®, SAFE® and CSiBridge™.

Cosenza E., Maddaloni G., Magliulo G., Pecce M., Ramasco R. (2004) - Progetto Antisismico di Edifici in Cemento Armato, IUSS Press, Pavia.

Fajfar P. (1999) - Capacity Spectrum Method based in Inelastic Demand Spectra, Earthquake Engineering and Structural Dynamics 28, 979-993.

Fajfar P. (2000) - A nonlinear analysis method for Performance Based Seismic Design, Earthquake Spectra 16 (3), 573-592.

Genturck B., Elnashai A.S. (2008) - Development and application of an advanced Capacity Spectrum Method, Engineers Structures 30, 3345-3354.

(3)

154

Iervolino, I., Cornell, C.A. (2004) - Sulla Selezione degli Accelerogrammi nella Analisi Non- Lineare delle Strutture, XI Convegno Nazionale ANIDIS L'Ingegneria Sismica in Italia, 25- 29 gennaio 2004, Genova.

Iervolino I., Maddaloni G, Cosenza E. (2007) - Accelerogrammi naturali compatibili con le specifiche dell’OPCM 3431 per l’analisi sismica delle strutture, XII Convegno Nazionale ANIDIS L'Ingegneria Sismica in Italia, 10-14 giugno 2007, Pisa.

Iervolino I., Galasso C., Cosenza E. (2010) - REXEL: computer aided record selection for code-based seismic structural analysis, Bulletin of Earthquake Engineering 8, 339-362.

INGV (2010) - Revised seismic classification of the ITACA stations, according to the EC8 and the Italian norms site classes, INGV Project S4, Deliverable #10

Kam W.Y., Pampanin S., Palermo A., Carr A.J. (2008) - Design Procedure and Behaviour of Advanced Flag-Shape (AFS) MDOF Systems, 2008 New Zealand Society of Earthquake Engineering (NZSEE) Conference, 11-13 aprile 2008, Wairakei, Nuova Zelanda.

Kam W.Y., Pampanin S., Palermo A., Carr A.J.(2010) - Self-centering structural systems with combination of hysteretic and viscous energy dissipations, Earthquake Engineering and Structural Dynamics 39 (10), 1083-1108.

Landolfo R. (2005) - L’evoluzione della normative sismica, Costruzioni Metalliche, anno LVII 1, 54-66.

Mazzolani F.M., Landolfo R., Della Corte G., Faggiano B. (2005) - Edifici con Struttura di Acciaio in Zona Sismica, IUSS Press, Pavia.

McInerney J. B. (2010) - Seismic Response of Steel Frames with Bilinear and Flag Shaped Hysteretic Braces, Open Access Dissertations and Theses, Paper 4259.

(4)

155

Palermo A., Pampanin S., Calvi G.M. (2005) - Concept and development of hybrid solutions for seismic resistant bridge systems, Journal of earthquake engineering, Imperial College 9 (6), 899-921.

Petrini L., Pinho R., Calvi G.M. (2004) - Criteri di progettazione antisismica degli edifici, IUSS Press, Pavia.

Ricles J.M., Sause R., Garlock M., Zhao C., (2001) - Post tensioned seismic resistant connections for steel frames, ASCE Journal of Structural Engineering, 127 (2), 113-121.

Sorace S., Terenzi G., Bandini L. (2006) - Le potenzialità della "FNA" nell'analisi dinamica non lineare di strutture dotate di sistemi avanzati di protezione sismica, 16° Convegno Nazionale di Meccanica Computazionale, 26-28 giugno 2006, Bologna

Uang C.M., Bertero V.V. (1990) - Evaluation of seismic energy in structures, Earthquake Engineering & Structural Dynamics 19 (2), 77-90.

Vamvatsikos D., Cornell C.A. (2002) - Incremental dynamic analysis, Earthquake Engineering and Structural Dynamics 31, 491-514.

Wilson E.L. (1985) - A new method of dynamic analysis for linear and nonlinear systems, Finite Elements in Analysis and Design 1, 21-23.

Wilson E. L. (1997) - Three-dimensional static and dynamic analysis of structure, Computers and Structures Inc.

Wilson E.L., Yuan M.W., Dickens J.M. (1982) - Dynamic analysis by direct superposition of Ritz vectors, Earthquake Engineering & Structural Dynamics 10 (6), 813–821.

(5)

156

Riferimenti normativi

Consiglio Superiore dei Lavori Pubblici (2009) - Istruzioni per l'applicazione delle Norme Tecniche delle costruzioni di cui al D.M. 14 gennaio 2008.

ECCS - Technical Working Group 1.3 (1986) - Recommended testing procedure for assessing the behavior of structural steel elements under cyclic loads, Doc. n.45/86.

FEMA (2000a) - FEMA-350 - Recommended seismic design criteria for new steel moment- frame buildings.

FEMA (2000b) - FEMA 356 - Prestandard and commentray for the seismic rehabilitation of buildings.

FEMA (2003) - FEMA 450 - NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures.

Ministero delle Infrastrutture (2008) - D.M. 14 gennaio 2008, Norme Tecniche per le Costruzioni.

UNI (2005a) - UNI EN 1992 - Eurocodice 2 - Progettazione delle strutture di calcestruzzo.

UNI (2005b) - UNI EN 1993 - Eurocodice 3 - Progettazione delle strutture di acciaio.

UNI (2005c) - UNI EN 1998 - Eurocodice 8 - Progettazione delle strutture per la resistenza sismica.

UNI (2009) - UNI EN 15129 - Dispositivi Antisismici (Antiseismic Devices).