• Non ci sono risultati.

[3] ENAC, Regolamento per la costruzione e l'esercizio degli aeroporti, Edizione 2 del 21 Ottobre 2003 e successive modifiche.

N/A
N/A
Protected

Academic year: 2021

Condividi "[3] ENAC, Regolamento per la costruzione e l'esercizio degli aeroporti, Edizione 2 del 21 Ottobre 2003 e successive modifiche. "

Copied!
5
0
0

Testo completo

(1)

196

BIBLIOGRAFIA

[1] ICAO, Circular 186, Wind shear, 1987.

[2] Civil Aviation Safety Authority , Consultation Draft CAR 235A – Runway Widths - Briefing document –, Maggio 2013.

[3] ENAC, Regolamento per la costruzione e l'esercizio degli aeroporti, Edizione 2 del 21 Ottobre 2003 e successive modifiche.

[4] ENAC, Direzione Centrale Regolazione Aeroporti, Prot. 07/02/2008, 0008375/DIRGEN/CAP .

[5] ICAO, Aerodrome Design Manual, Doc 9157 - Part 1 .

[6] Federal Aviation Regulations, Title 14 - Aeronautics and Space, Subchapther C

"Aircraft", Part 25, Airworthiness standards: transport category.

[7] White, J.C., Agrawal, S.K., Soft ground arresting system for airports,

DOT/FAA/CT-93/80, Final report, U.S. Department of Transportation, FAA Technical Center , Dicembre 1993 .

[8] Bassani, M., Comportamento dinamico di letti di arresto per aeromobili , Convegno SIIV Cagliari , 1999 .

[9] Cook, R.F., Soft ground aircraft arresting systems, DOT/FAA/PM-87/27, 1987 . [10] Barsotti, M.A., Puryear J.M.H., Stevens D.J., Developing improved civil aircraft arresting systems, Report 29, Airport Cooperative Research Program .

[11] Gwynne, G.M., Urea formaldehyde foamed plastic emergency arresters for civil aircraft, Royal Aircraft Establishment technical report 74002, 1974 .

[12] Crenshaw, B.M., Aircraft landing gear dynamic loads induced by soil landing fields, 1972 .

[13] Crenshaw, B.M., Soil/wheel interaction at high speed .

[14] Beaty, I., An investigation into the rolling resistance if a full size meteor wheel in dry Leighton Buzzard sand using the heavy load friction vehicle, DRIC-BR-49447,

Ministry of Defense, DA Mech, UK .

[15] Trafford, J.W., Eunice, G., Aircraft tire behavior during high-speed operations in soil, Langley Research Center, Hampton - Virginia - USA .

[16] The Boeing Company, Calculating tire contact area .

[17] Wong, J.Y., Theory of ground vehicles, 2001 .

(2)

197

[18] Rashidi, Fakhri, Sheikhi, Azadeh, Razavi, Evaluation of Bekker model in

predicting soil pressure-sinkage behaviour under field conditions, Middle-East Journal

of Scientific Research, 2012 .

[19] Benedetto, A., D'amico, F., Tosti, F., Improving safety of runway overrun through the correct numerical evaluation of rutting in cleared and graded areas, Safety Science,

2013 .

[20] Coutermarsh, B., Velocity effect of vehicle rolling resistance in sand, Journal of Terramechanics, 2007 .

[21] Richmond, L.D., Brueske, N.W., De Bord, K.J., Aircraft dynamic loads drom substandard landing sites, The Boeing Company, 1968 .

[22] Gerardi, A.G., Collection of commercial aircraft characteristics for study of runway roughness, Technical report FAA-RD-76-64. U.S. Air Force Engineering and

Services Center .

[23] Shoop, S.A., Diemand, D., Wieder, W.L., Mason, G., Seman, P.M. , Predicting California Bearing Ratio from trafficability Cone Index values, U.S. Army Corps of

Engineers, Engineer Research and Development Center, 2008 .

[24] U.S. Department of Air Force - Headquarters Air Force Civil Engineer Support Agency, Structural evaluation procedure for stabilized soil-surfaced airfields, Engineering Technical Letter, 2008 .

[25] Janosi, Z., Prediction of WES Cone Index by means of a stress-stain function of soils, Report n. 46, Land Locomotion Laboratory, 1959 .

[26] Freitag, D.R., Wheels on soft soils, an analysis of existing data, Technical Report n.

3-670, U.S. Army Corps of Engineers, WES, 1965 .

[27] Scala, A.J., Simple methods of flexible pavement design using cone penetrometer, 2nd Australian and New Zealand Conference on soil mechanics and foundation engineering, 1956 .

[28] Kraft, D.G., Analytical landing gear-soils interaction . [29] Bekker, M.G., Theory of land locomotion, 1956 .

[30] Bernstein, R., Problems of the experimental mechanics of motor ploughs, 1919 . [31] Letoshnev, Goriatchkin et Al., Theory and development of agricultural machinery . [32] Reece, A., Principle of soil-vehicle mechanics, 1966 .

[33] Apostolopoulos, D.S., Analytical configuration of wheeled robotic locomotion,

2001 .

(3)

198

[34] Gibbesch, A., Schafer, B., Advanced modelling and simulation methods of planetary rover mobility on soft terrain .

[35] Gibbesch, A., High-speed tyre-soil interaction of aircraft on soft runways, German Aerospace Center - Institute of Robotics and Mechatronics .

[36] Fan, T., Multiplate penetration test to determine soil stiffness moduli . [37] Wong, J.Y., Terramechanics and off-road vehicle engineering, 1989 . [38] Rashidi, Keyhani, Tabatabaeefar, Multiplate penetration tests to predict soil pressure-sinkage behaviour under rectangular region .

[39] Van, N.N., Matsuo, T., Koumoto, T., Inaba, S., Experimental device for measuring sandy soil sinkage parameters, 2007 .

[40] Gibbesch, A., Krenn, R., Soft soil contact modeling technique for multi-body system simulation, German Aerospace Center - Institute of Robotics and Mechatronics .

[41] Dole, G.R., A review of computer simulations for aircraft surface dynamics, Journal of aircraft .

[42] Cook, R.F. , Teubert, C.A. , Hayhoe, G. , Soft ground arrestor design program , Technical report DOT/FAA/CT-95 , Federal Aviation Administration, 1995 .

[43] Heymsfield, W., Halsey, T., A parametric sensitivity analysis of soft ground arrestor systems, 2007

[44] Di Mascio, P., Grande, F., Metodologia per la valutazione e l'adeguamento della capacitò portante delle strip aeroportuali, Azimut Airpress 21, Maggio 2008 .

[45] Coni, M., Analisi teorico-sperimentale sulla portanza delle strisce di sicurezza delle piste di volo, XIII Convegno Nazionale S.I.I.V. Padova, Ottobre 2003 .

[46] Zhang, Z.Q., Yang, J.L. , Li, Q.M. , An analytical model of foamed concrete aircraft arresting system , Beijing University of Aeronautics and Astronautics & The

University of Manchester .

[47] Moon, F.C., Applied dynamics: with applications to multibody and mechatronic systems, 2008 .

[48] Wagner, P.J., Investigation of strip and RESA –stability according to EASA and ICAO Annex 14 .

[49] EASA NPA 2011-20 (B.III)-Draft Certification Specifications , Capitolo C-

Runway end safety area , GM-ADR-DSN.C.210-Runway end safety areas .

[50] Manuale di formazione aeroportuale, Dipartimento dei vigili del fuoco del

soccorso pubblico e della difesa civile - direzione centrale per la formazione .

(4)

199

[51] ICAO, Aerodromes Panel, Agenda Item 7: Shoulder, RESA and strip minimum support, 11th meeting of Aerodrome Design Working Group, Rio de Janeiro, July 2012.

[52] Transports Canada, Advisory Circular AC 302-015, Runway end safety area bearing strength requirements - 4.0 Discussion .

[53] U.S. Corps of Engineers, Aircraft operations on unsurfaced soil .

[54] U.S. Army and Air Force, Planning and design of roads, airfields, and heliports in the theater of operations — Airfield and heliport design, Vol. II , FM 5-430-00-2, 1994 .

[55] ASTM, D 6951-03, Standard test method for use of the dynamic cone penetrometer in shallow pavement applications .

[56] Traylor, M.L., Thompson, M.R., Sinkage prediction - subgrade stability, Transportation Research Laboratory, Department of civil engineer, University of Illinois, 1977 .

[57] Ladd, D., Ulery, H., Aircraft ground-flotation investigation, Air Force Flight at Dynamic Laboratory Technical Documentary Report 66-43, 1967 .

[58] Cavallini, R., Analisi degli interventi di ripristino della capacità portante delle runway strip, Università di Pisa, 2011 .

[59] Bekker, M.G., Introduction to terrain-vehicle systems, 1969 . [60] Wong, J.Y., Terramechanics and off-road vehicles, 1989 . [61] Harrison, W.L., Vehicle performance over snow , 1975 . [62] Wong, J.Y., Evaluation of soil strength measurements, 1983 .

[64] ASTM, D 6951-03, Standard test method for use of the dynamic cone penetrometer in shallow pavement applications .

[65] AC 150/5335-5a, Standardized method of reporting airport pavement strengt - PCN .

[66] Bowles, J. E., Fondazioni - Progetto e analisi .

[67] Lo Presti, D.C., slides del corso di Geotecnica, Università di Pisa .

[68] Timoshenko, S.P., Goodier, J. N., Theory of elasticity, McGraw-Hill, 1970 . [69] European Cooperation in the Field of Scientific and Technical Research, Use of Falling Weight Deflectometers in pavement evaluation, COST 336, 2005 .

[70] Moraldi, G. et Al., Sovrastrutture e pavimentazioni stradali ed aeroportuali, ESA, 1979 .

[71] Jones, R., In situ measurement of the dynamic properties of soil by vibration

methods, 1938 .

(5)

200

[72] Heukelom, W., Foster, C.R., Proceeding AS.C.E. 86 SMI, 1960 .

[73] Heukelom, W., Klomp, A.J.g., Dynamic testing a means of controlling pavements during and after construction, Proceedings International Conference An Arbor, 1962 .

[74] Wagner, P.J., ICAO conforming construction of strips and RESA inside the graded portion .

[75] Norme Tecniche Stabilizzazione delle terre con calce, CNR 21 Febbraio 1973 - Anno VII n. 36 - BOLLETTINO UFFICIALE - Parte IV .

[76] Norme per l'accettazione delle calci, R.D. 2231 del 16/11/1939 .

Riferimenti

Documenti correlati

stati fissati tenendo ferma l'ipotesi di stabili- tà della occupazione agricola, ipotesi difficil- mente verificabile dato che dal 1963 al 1966 l'occupazione agricola è discesa

del giorno-voto, ma si deve abbandonare il terreno del programma quinquennale regio- nale, perchè gli obiettivi di quel programma quinquennale regionale non sono compatibi- li con

le misure atte ad eliminarne le cause di fondo e a fornire, per conseguenza, un preciso e cir- costanziato quadro di riferimento per l'inter- vento dei poteri pubblici nazionali

82, che la presente copia analogica è conforme in tutte le sue componenti al documento informatico originale depositato agli atti presso l’ Unione dei Comuni Valli del Reno, Lavino

- il soggetto sottoscriva il documento-quietanza emesso dal Comune al momento del pagamento dell’intera tassa o della prima rata di essa per accettazione della clausola con la quale

16 dell’11 marzo 2014 , con la quale è stata approvata la ripartizione 2013-2015 delle risorse complessivamente assegnate alle Strutture Territoriali ed alle Strutture della

- Ai fini della rilevazione delle forze di lavoro, vengono indicati con tale voce gli iscritti nei fogli di famiglia delle anagrafi della popolazione residente al netto,

Per il teorema di nullità più rango, in questo caso l’applicazione lineare è suriettiva, quindi possiamo prendere come base dell’immagine una qualsiasi base di R 3.. Calcoliamo