electronic (Reg. Metered-time) 8-15-20-30 lt. resin
Variants
Code Description
15000116-08 Automatic water softener valve Fleck 5800 SXT 3/4" electronic (Reg. Metered-time) 8 lt. Evolio 15000116-15 Automatic water softener valve Fleck 5800 SXT 3/4" electronic (Reg. Metered-time) 15 lt. Evolio 15000116-20 Automatic water softener valve Fleck 5800 SXT 3/4" electronic (Reg. Metered-time) 20 lt. Evolio 15000116-30 Automatic water softener valve Fleck 5800 SXT 3/4" electronic (Reg. Metered-time) 30 lt. Evolio
Evolio has been developed as an easy-to-use complete softener with a modern and attractive design. Each version is available in 4 different sizes. The timer is mounted on the top cover, facilitating the access to the softener data, easily readable thanks to the 20° display inclination. Moreover, the large salt opening makes Evolio softener ergonomic and simplifies the salt refill operation.
Integrated bypass Benefits and advantages
Reduction of water hardness, which is cause of scale.
ENERGY SAVING: the device prevents formation of deposits in pipes and hydraulic lines. Greater sense of wellness during shower. Skin soft and clean. Increased duration of appliances and boilers.
COST SAVING: reduction in use of soaps, fabric softeners and chemicals. Reduced maintenance costs.
Fully automatic operation. It should just worry about adding salt in water softner.
Increased sodium (for drinking water)
Most of the sodium consumed is taken with foods, especially ones obtained with industrial processing. Salt is a great preservative and therefore is used as an additive for processed products. The assumption of sodium with the water we drink is relatively low compared to that which is taken with food. All softeners to produce softened water through ion exchange resins in, produce softened water output sodium ions. The recommended sodium limit for water intended for human consumption is 200ppm liter. Depending on sodium concentration and water hardness, it is possible that water presents an higher sodium concentration than recommended. Where this is the case or if you need to follow a low salt content, it is advisable to install a domestic reverse osmosis for drinking water.
Specifications
* Min. pressure: 1,5bar(1,5kg/cm2)
* Max. pressure: 8bar(8kg/cm2)
* Min. temperature: 2°C
* Max. temperature: 38°C
* Input/Output water 3/4" male, thread BSPT
* Drain Line: 1/2" male, thread BSPT
Model Specifications 15000116-08: 8lt. resin (for 1/2 people)
* Exchange capacity: 40ºHFxm3
* Salt consumption for regeneration: 0.96Kg/Salt.
* Water consumption for regeneration: 47lt.
* Quantity of treated water for regeneration: 30°F-1,33m3, 35°F-1,14m3, 40°F-1m3, 45°F-0,88m3, 50°F-0,8m3, 60°F-0,66m3
* Max. flow: 0,42m3/h
* Dimensions: Base (mm): 310x425 * Height (mm): 760 Model Specifications 15000116-15: 15lt. resin (for 3/4 people)
* Exchange capacity: 75ºHFxm3
* Salt consumption for regeneration: 1.8Kg/Salt.
* Water consumption for regeneration: 83lt.
* Quantity of treated water for regeneration: 30°F-2,5m3, 35°F-2,14m3, 40°F-1,87m3, 45°F-1,66m3, 50°F-1,5m3, 60°F-1,25m3
* Max. flow: 0,6m3/h
* Dimensions: Base (mm): 310x425 * Height (mm): 1200 Model Specifications 15000116-20: 20lt. resin (for 4/6 people)
* Exchange capacity: 100ºHFxm3
* Salt consumption for regeneration: 2.4Kg/Salt.
* Water consumption for regeneration: 189lt.
* Quantity of treated water for regeneration: 30°F-3,33m3, 35°F-2,85m3, 40°F-2,5m3, 45°F-2,22m3, 50°F-2m3, 60°F-1,66m3
* Max. flow: 0,8m3/h
* Dimensions: Base (mm): 310x425 * Height (mm): 1200
Model Specifications 15000116-30: 30lt. resin (for 6/8/10 people)
* Exchange capacity: 150ºHFxm3
* Salt consumption for regeneration: 3.6Kg/Salt.
* Water consumption for regeneration: 279lt.
* Quantity of treated water for regeneration: 30°F-5m3, 35°F-4,28m3, 40°F-3,75m3, 45°F-3,33m3, 50°F-3m3, 60°F-2,5m3
* Max. flow: 1,2m3/h
* Dimensions: Base (mm): 310x425 * Height (mm): 1200 Code: 15000112
Automatic water softener valve AUTOTROL Peanut 368/606 3/4" electronic (Reg. Metered-time) 14lt. resin
Variants
Code Description
15000112-01 Water softener AUTOTROL Peanut 368/606 3/4" elect. (Reg. Metered-time) 14 lt. Heterospherical resin
15000112-02 Water softener AUTOTROL Peanut 368/606 3/4" elect. (Reg. Metered-time) 14 lt. Monospherical resin
This is a water softener elegant design that gives you the feeling of luxury water. Reduces the unpleasant limestone around the tub and the sink. It will save you money on your heating bill and reduce the
consumption of all detergents and cleaning products. The water pipes will always be clean and free from fouling, clogging and damage. In all the water circuit there will be more pressure losses or water flows minors.
Efficient and carbon neutral
The Peanut 368 water softener has been shown to save up to 24% of the cost of running the heating system. The new Peanut 368 water softener has been specifically designed to look good. Consisting of a sleek compact shell which encases all working parts and looks great, but most importantly keeps everything clean and tidy. The Peanut 368 is one of the very few softeners available that can be defined as carbon neutral (defined by the Energy Saving Trust). Saving 50% on soap and detergent and prolonging the life of clothes by up to 15%.(1)
(1) Independent study by The Water Quality Association, 2010 Block salt or tablet salt?
The Peanut 368 takes both. In the case of block salt must be requested by the support blocks for the purchase.
1x 15000407 Chlorine generator complete with fittings
1X 02001014 3-pieces standard housing 10" clear IN-OUT 1" with wrench & wall mounting bracket.
2X 04001006-05 Ionicore wound polypropylene cartridge 9-3/4'' - 50 micron (50) 1X Kit 13000001 Titrant total hardness (1° F) 15cc single reagent.
* Water softeners are supplied without salt, we recommend to use pads salt.
Features
• Dimensions in cm (HxWxD) 50,7x28,2x44
• Liter resin: 14
• Resin: Heterospherical o Monospherical.
• Power: 230V-50Hz / 12V (power supply) European Plug
• Pressure min: 1,8bar(1,8kg/cm2)
• Pressure Max: 8bar(8kg/cm2)
• Nominal flow: 0,8m3/h
• Max flow: 1,1m3/h
• Reserve: reserve fixed with immediate or delayed regeneration (settable)
• Number of regeneration cycles: 5
• Type regeneration: downflow
• Tank: 10"x16"
• Temperature Min: 2°C
• Temperature Min: 35°C
• Environment temperature max: 45°C
• Average number of days between regenerations: 4 days(2) max 30 days.
• Power consuption: Typically 1 watt
(meets requirements for water efficiency as defined by Code for Sustainable Homes)
(2) based on a 4 people household using 125 litres /person in an area where the water is 300ppm hard.
Installation data
• Input / Output water 3/4" male thread
• Drain: Male tube to hose elbow OD stem 1/2"
• Brine: 3/8 "compression
• Noryl By-pass icluded
Increased sodium (for drinking water)
Most of the sodium consumed is taken with foods, especially ones obtained with industrial processing. Salt is a great preservative and therefore is used as an additive for processed products. The assumption of sodium with the water we drink is relatively low compared to that which is taken with food. All softeners to produce softened water through ion exchange resins in, produce softened water output sodium ions. The
recommended sodium limit for water intended for human consumption is 200ppm liter. Depending on the concentration of sodium and water hardness, it is possible that the water presents a sodium concentration of higher than recommended. Where this is the case or if you need to follow a low salt content, it is advisable to install a reverse osmosis home for water to drink.
Model Specifications 15000112-01 14lt Heterosferical resin. (for 3/4 people)
• Exchange capacity: 72,80ºHFxm3.
• Salt consumption for regeneration: 1,89 Kg./Salt.
• Water consumption in regeneration: 100lt.
• Quantity of water treated for regeneration, 30°F-2,43m3, 35°F-2,08m3, 40°F-1,82m3, 45°F-1,62m3, 50°F-1,45m3, 60°F-1,22m3.
Model Specifications 15000112-02 14lt Monosferical resin. (for 3/4 people)
• Exchange capacity: 84ºHFxm3.
• Salt consumption for regeneration: 1,89 Kg./Salt.
• Water consumption in regeneration: 100lt.
• Quantity of water treated for regeneration, 30°F-2,8m3, 35°F-2,4m3, 40°F-2,1m3, 45°F-1,86m3, 50°F-1,68m3, 60°F-1,4m3.
Code: 15000115