• Non ci sono risultati.

Evaluation of the material’s damage in gas turbine rotors by instrumented spherical indentation

N/A
N/A
Protected

Academic year: 2021

Condividi "Evaluation of the material’s damage in gas turbine rotors by instrumented spherical indentation"

Copied!
1
0
0

Testo completo

(1)D. Nappini et alii, Frattura ed Integrità Strutturale, 30 (2014) 394-402; DOI: 10.3221/IGF-ESIS.30.47. Evaluation of the material’s damage in gas turbine rotors by instrumented spherical indentation D. Nappini, G. Zonfrillo. Department of Industrial Engineering, University of Florence, Via S.Marta 3, Florence, Italy duccio.nappini@unifi.it, giovanni.zonfrillo@unifi.it. F. Mastromatteo, I. Giovannetti GE Oil&Gas, Florence, Italy francesco.mastromatteo@ge.com, iacopo.giovannetti@ge.com ABSTRACT. Experimental indentations are carried out on items of two different materials, taken in several location of various components from high pressure gas turbine rotor which have seen an extensive service. The components object of investigation consisted in 1st and 2nd high pressure turbine wheels made in nickel-base superalloy (Inconel 718), the spacer ring (Inconel 718) and the compressor shaft made in CrMoV low alloy steel (ASTM A471 type10). Aim of the work is to set up the capability of the instrumented spherical indentation testing system to evaluate variations in the material properties due to damage, resulting from temperature field and stresses acting on components during service. To perform this task load-indentation depth curves will be acquired in various zones of the above mentioned components. The analysis of the results has allowed to identify an energy parameter which shows a linear evolution with the mean temperature acting on the components. KEYWORDS. Instrumented indentation; Depth-sensing indentation; Material characterization..

(2)

Riferimenti

Documenti correlati

The Greek Islands are generally subdivided into two groups, according to the location: the Ionian Islands (including Kerkira, Cephalonia, Lefkas, Zakinthos,

The adapter is the device which provide to enlarge the section of the linear support to make it perfectly fit inside the hole of the ceramic tile.. The linear support fit perfectly

wetland plant communities (and their corresponding habitats), rare in the Mediterranean basin, are not included in the HD. This study aims to propose some criteria and a procedure to

Habitat factors affecting sett-site choice In the study area, 4 railway embankments occupied by badgers and 6 unused banks were compared taking into consideration the

It is interesting to note that in the case of nLYS the highest concentration of soluble C60 was obtained at the highest protein:C60 powder ratio (figure 4 (A)), whereas, in the case

Dal momento che il presente lavoro è stato condotto con lo scopo di rilevare l’effettiva influenza che informazioni aggiuntive provenienti dalla teoria di

the period 2000–10 (B) of deforestation drivers; and of the relative disturbed forest area fraction of degradation drivers (C), based on data from 46 tropical and

The Boundaries of the Home State Responsibility The nature and scope of the home state’s responsibility in respect of the prevention and minimisation of the risk of human