Bibliografia
Bibliografia
Ahn HS, 2005. A virtual model of the human cervical spine for physics-based simulation and applications. PhD. Thesis, University of Tennessee.
Buchanan TS, and Shreeve DA, 1996. An evaluation of optimization techniques for the prediction of muscle activation patterns during isometric tasks. J Biomech Eng, vol. 118, pp. 565–574.
Carpaneto J, Micera S, Galardi G, Micheli A, Carboncini MC, Rossi B, Dario P, 2004. A protocol for the assessment of 3D movements of the head in persons with cervical dystonia. Clin Biomech, vol. 19, pp. 659-663.
Chan J, Brin MF, Fahn S, 1998. Idiopathic cervical dystonia: clinical characteristics. Mov Disord, vol. 13, pp.119-126.
Chao, EY 2003. Graphic based musculoskeletal model for biomechanical analyses and animation. Med Eng Phy, vol. 25, pp. 201-212.
Comella CL, Stebbins GT, Goetz CG, Chmura TA, Bressman SB, Lang AE, 1997.
Teaching tape for the motor section of the Toronto Western Spasmodic Torticollis Scale.
Mov Disord, vol. 12, pp.570–575.
Consky ES e Lang AE, 1994. Clinical assessment of patients with cervical dystonia, Therapy with botulinum toxin, Jankovic J, Hallett editors, New York, pp. 211-237.
Coutinho, MG, 2001. Dynamic Simulations of Multibody Systems. Springer, New York.
Cripton PA., Sati M, Orr TE, Bourquin Y, Dumas GA, Nolte LP, 2001. Animation of in vitro biomechanical tests. J Biomech, vol. 34, pp. 1091-1096.
Delp SL and Loan JP, 1995. A graphics based software system to develop and analyze models of musculoskeletal structures. Comp Biol Med, vol. 25, pp. 21-34.
Delp SL and Loan JP, 2000. A computational framework for simulation and analysis of human and animal movement. IEEE Comp Scien Eng, vol. 2, pp. 46-55.
Deng YC e Goldsmith W, 1987. Response of a human head/neck/uppertorso replica to dynamic loading II. Analytical/numerical model. J Biomech, vol. 20, pp. 487-497.
Fagan MS, Julian S and Mohsen AM, 2002. Finite element analysis in spine research.
Proceedings of the Institution of Mechanical Engineers. Part H. J Eng Med, vol. 216, pp.
281-298.
Feipel V, Rondelet B, Le Pallec J, Rooze M, 1999. Normal global motion of the cervical spine: an electrogoniometric study. Clin Biomech, vol. 14, pp. 462-470.
Galardi G, Micera S, Carpaneto J, Scolari S, Gambini M, Dario P, 2003. Automated assessment of cervical dystonia. Mov Disord, vol. 18, pp. 1358-1367.
- 69 -
Bibliografia
Goel VK e Clausen JD, 1998. Prediction of load sharing among spinal components of a C5-C6 motion segment using the finite element approach. Spine, vol. 23, pp. 684-691.
Herrmann AM e Delp S, 1999. Moment arm and forcegenerating capacity of the extensor carpi ulnaris after transfer to the extensor carpi radialis brevis. J. Hand Surg. Am., vol. 24, pp. 1083–1090.
Holzbaur KRS, Murray WM, Delp S, 2005. A Model of the Upper Extremity for Simulating Musculoskeletal Surgery and Analyzing Neuromuscular Control. Ann Biomed Eng, vol. 33(6), pp. 829–840.
Kumaresan S, Yoganandan N, Pintar FA, 1997a. Finite element analysis of anterior cervical spine interbody fusion. Biomedl Mat Eng, vol. 7, pp. 221-230.
Kumaresan S, Yoganandan N, Pintar FA, 1998. Finite element modeling approaches of human cervical spine facet joint capsule. J Biomech, vol. 31, pp. 371-376.
Kumaresan S, Yoganandan N, Pintar FA, Maiman DJ, 1999. Finite element modeling of the cervical spine: role of intervertebral disc under axial and eccentric loads. Med Eng Phys vol. 21, pp.689-700.
Kumaresan S, Yoganandan N, Pintar FA, Voo LM, Cusick JF, Larson SJ, 1997b. Finite element modeling of cervical laminectomy with graded facetectomy. J Spin Disord, vol.
10, pp. 40-46.
Lemay MA, Crago PE, Keith MW, 1996. Restoration of pronosupination control by FNS in tetraplegia—experimental and biomechanical evaluation of feasibility. J Biomech, vol.
29, pp. 435–442.
Lindeboom R, de Haan RJ, Aramideh M, Brans JW, Speelman JD, 1996. Treatment outcomes in cervical dystonia: a clinimetric study. Mov Disord, vol. 11, pp.371–376.
Lindeboom R, Brans JW, Aramideh M, Speelman HD, De Haan RJ, 1998. Treatment of cervical dystonia: a comparison of measures for outcome assessment. Mov Disord, vol. 13, pp.706 –712.
Magermans DJ, Chadwick EK, Veeger HE, Rozing PM, van der Helm FC, 2004.
Effectiveness of tendon transfers for massive rotator cuff tears: A simulation study. Clin.
Biomech., vol. 19, pp. 116–122.
Maurel N, Lavaste F, Skalli W, 1997. A three dimensional parameterized finite element model of the lower cervical spine. Study of the influence of the posterior articular facets. J Biomech, vol. 30, pp.921-931.
Moore AP, Blumhardt LD. A double blind trial of botulinum toxin, 1991. A in torticollis, with one year follow up. J Neurol Neurosurg Psychiatry, vol. 54, pp. 813– 816.
Murray WM, Bryden AM, Kilgore KL Keith MW, 2002. The influence of elbow position on the range of motion of the wrist following transfer of the brachioradialis to the extensor carpi radialis brevis tendon. J. Bone Joint Surg. Am., vol. 84-A, pp. 2203–2210.
- 70 -
Bibliografia
Ng HW and Teo EC, 2001. Nonlinear finiteelement analysis of the lower cervical spine (C4-C6) under axial loading. J Spin Disord, vol. 14, pp.201-210.
Ng HW, Teo EC, Lee KK, Qiu TX, 2003. Finite element analysis of cervical spinal instability under physiologic loading. J Spin Disord, vol. 16, pp.55-65.
Nutt JG, Muenter MD, Aronson A, Kurland LT, Melton LJ, 1988. Epidemiology of focal and generalised dystonia in Rochester, Minnesota. Mov Disord, vol. 3 pp. 188–194.
O’Brien CO, Brashear A, Cullis P, Truong D, Molho E, Jenkins S, Wojcieszek J, O’Neil, T, Factor S, Seeberger L, 2001. Cervical dystoniaseverity scale reliability study, Mov Disord, vol.16, pp. 1086-1090.
Onan OA, Heggeness MH, Hipp JA, 1998a. A motion analysis of the cervical facet joint.
Spine, vol. 23, pp. 430-439.
Onan OA, Hipp JA, Heggeness MH, 1998b. Use of computed tomography image processing for mapping of human cervical facet surface geometry. Med Eng and Phys, vol.
20, pp. 77-81.
Panjabi MM, 1998. Cervical spine models for biomechanical research. Spine, vol. 23, pp.
2684-2700.
Piazza SJ e Delp SL, 2001. Three-dimensional dynamic simulation of total knee replacement motion during a step-up task. J Biomech Eng, vol. 123, pp. 599–606.
Porcher Nedel L, Thalmann D, 2000. Anatomic modeling of deformable human bodies.
Vis Comput, vol. 16, pp.306-321.
Rancourt D e Hogan N, 2001. Stability in force-production tasks. J Mot Behav, vol. 33, 193–204.
Saul KR, Murray WM, Hentz VR, Delp S, 2003.Biomechanics of the Steindler flexorplasty surgery: A computer simulation study. J Hand Surg Am, vol. 28, pp. 979–986.
Sforza C, Grassi G, Fragnito N, Turci M, Ferrario V, 2002. Three-dimensional analysis of active head and cervical spine range of motion: effect of age in healthy male subjects. Clin Biomech, vol. 17, pp. 611–614.
Teo EC e Ng HW, 2001a. Evaluation of the role of ligaments, facets and disc nucleus in lower cervical spine under compression and sagittal moments using finite element method.
Med Eng Phys, vol. 23, pp.155-164.
Teo EC e Ng HW, 2001b. First cervical vertebra (atlas) fracture mechanism studies using finite element method. J Biomech, vol. 34, pp.13-21.
Tsui JK, Eisen A, Stoessl AJ, Calne S, Calne DB, 1986. Double-blind study of botulinum toxin in spasmodic torticollis, Lancet, vol. 2, pp. 245-247.
- 71 -
Bibliografia
van der Horst MJ, 2002. Human head neck response in frontal, lateral and rear end impact loading: modelling and validation. PhD. Thesis, Technical University of Eindhoven.
Vasavada AN, Li S, e Delp SL, 1998. Influence of muscle morphometry and moment arms on the moment generating capacity of human neck muscles. Spine, vol. 23, pp. 412-422.
Ferrario VF, Sforza C, Serrao G, Grassi G, Mossi E, 2002. Active range of motion of the head and cervical spine: a three-dimensional investigation in healthy young adults. J Orthop Res, vol. 20, pp. 122–129.
Voo LM, Kumaresan S, Yoganandan N, Pintar FA, e Cusick JF, 1997. Finite element analysis of cervical facetectomy. Spine, vol. 22, pp. 964-969.
White AA e Panjabi MM, 1990. Clinical Biomechanics of the Spine. JB Lippincott Co., Philadelphia.
Yoganandan N, Kumaresan SC, Voo L, Pinter FA, and Larson SJ, 1996. Finite element modeling of the C4-C6 cervical spine unit. Med Eng Phy, vol. 18, pp. 569-574.
Yoganandan N, Pintar FA, Sances A, Maiman DJ, 1991. Strength and motion analysis of the human headneck complex. J Spin Disord, vol. 4, pp. 73-85.
- 72 -
