RACCORDERIA IN OTTONE Brass Fittings. EDIZIONE Edition 03/2021

(1)

EDIZIONE | Edition 03/2021

RACCORDERIA IN OTTONE

Brass Fittings

(2)

(3)

1

INDICE / INDEX

Raccorderia Filettata in Ottone Threaded Brass Fittings

Pag. 04

Raccordi Sgrassati per Uso Ossigeno Degreased Fittings for Oxygen Pag. 24

Serie 140 | 140 Series

Raccordi per Tubo Rame Tenuta ORing

Compression Fittings with ORing for Copper Tube

Pag. 32

Serie 2160 | 2160 Series Raccordi per Tubo Rame Tenuta Ogiva

Compression Fittings with Olive for Copper Tube

Pag. 40

Serie 200 | 200 Series

Raccordi per Tubo Polietilene e PVC Compression Fittings for PE and PVC Pipe Pag. 46

Serie 150 | 150 Series Raccordi di Riparazione per Tubo Ferro Compression Fittings for Steel Pipe Pag. 54

Collettori

Manifolds

Pag. 56

(4)

2 L’AZIENDA

Lombarda Raccordi Srl è una storica realtà aziendale della Bergamasca, presente sul mercato dal lontano 1979. Nel corso degli anni ha sviluppato un servizio di grande qualità, garantendo soluzioni mirate, accurata assistenza al cliente ed una vastissima scelta di prodotti.

Il successo dell’Azienda si basa sulla capacità di fornire in maniera completa raccorderia per impianti idrotermosanitari, di distribuzione gas, refrigerazione, impianti chimici, medicali ed industriali in genere.

Pioniera nel settore della fornitura di raccorderia metallica, negli anni ha progettato, brevettato e realizzato molteplici prodotti a marchio proprio.

Da sempre attenta a garantire un rigido sistema di gestione della qualità, Lombarda Raccordi è Azienda certificata secondo UNI EN ISO 9001 dal lontano 1996 e UNI EN ISO 14001 dal 2016, con un impegno costante nella ricerca del miglioramento continuo.

La gamma di prodotti offerta comprende sia raccorderia filettata (ISO 7/1, ISO 228, NPT) che a saldare (B.W. o S.W.) con un’ampia disponibilità di materiale dal pronto.

Punto di forza di Lombarda Raccordi Srl sono inoltre la raccorderia a pressare (PressFittings) fornibile dal pronto in acciaio inox, acciaio al carbonio, rame, bronzo, cupro-nichel e il pratico sistema multistrato a pressare e a stringere.

Recente novità è rappresentata infine dalla gamma di raccorderia in rame a saldare per alte pressioni, un prodotto sviluppato e realizzato a marchio Lombarda Raccordi, che nasce per rispondere alle esigenze dei moderni compressori e della richiesta di pressioni di esercizio più elevate dello standard.

Lo Staff di Lombarda Raccordi, sempre disponibile e preparato, offre un punto fermo per qualsiasi necessità di tipo commerciale e per un supporto tecnico immediato.

Il riscontro dei nostri Clienti sarà sempre verifica dell’efficacia dei nostri sforzi!

THE COMPANY

Lombarda Raccordi Srl is a historic business reality, on the market since 1979. Over the years it has developed a high quality service, providing targeted solutions, accurate customer service and a huge selection of products.

The company's success is based on the ability to supply complete fittings for plumbing and heating systems, gas distribution, refrigeration, chemical, medical and general industrial. A pioneer in the field of supply of metal pipe fittings, over the years has designed, patented and manufactured several products under its own brand.

Careful to ensure a strict quality management system, Lombarda Raccordi is a certified Company, according to UNI EN ISO 9001 since early 1996 and UNI EN ISO 14001 from 2016, always looking for continuous improvement.

The product range includes threaded (ISO 7/1 BSPT, ISO 228 BSPP, NPT) and weld (BW or SW) fittings, with a lot of items always ready-to-ship.

A major strength of Lombarda Raccordi Srl is represented also by the innovative Press-Fittings supplied in stainless steel, carbon steel, copper/bronze and the practical multilayer-system to press or tighten.

Latest news is the high-pressure range of solder copper fittings, a product developed and implemented by Lombarda Raccordi, with an high thickness created to satisfy as required by modern compressors.

Lombarda Raccordi’s staff, always available and prepared, offer assistance for any commercial request and immediate technical support.

Feedback from our customers will always verify the value of our efforts!

(5)

3

R a cc o rd e ri a F il e tta ta i n O tto n e T h re a d e d B ra ss F itti n g s

(6)

4

- Raccorderia Filettata in Ottone (finitura Gialla o Cromata) - - Threaded Brass Fittings (Yellow or Chrome Plated) -

MATERIALI / MATERIALS La raccorderia filettata in ottone Lombarda Raccordi Srl viene

realizzata tramite stampaggio a caldo, in ottemperanza alle specifiche della normativa vigente UNI EN 1254-4, o mediante processo di lavorazione da torneria. Di seguito sono elencate le principali caratteristiche chimico/fisiche dei materiali:

Lombarda Raccordi’s threaded brass fittings are made by hot molding process, in compliance with the specifications of the current UNI EN 1254-4 standard, or by a machine processing from brass bars. The main chemical and physical characteristics of the materials are listed below:

SEMILAVORATO ESTRUSO IN OTTONE PER STAMPAGGIO A CALDO / EXTRUDED SEMIFINISHED BRASS FOR HOT MOLDING

Nomativa / Lega Standard / Alloy

Composizione Chimica % Chemical Composition %

Massa Vol Density

Durezza Hardness

Fucinabilità Forgeability

Lavoraz. a Caldo Hot Working

Cu Pb Sn Fe Zn Kg/dm3 HB min. (100% C377) °C

UNI EN 12165

CW617N CuZn40Pb2 57÷59 1,6÷2,2 <0,3 <0,3 Diff. 8,4 80 90 650÷720

Lega Alloy

Stato Metallurgico Condition

Dimensione (mm) Dimension (mm)

Carico Rottura Rm Breaking Load Rm

Snervamento Rp0,2

Enervation Rp0,2

Allungamento Elongation

da a N/mm2 N/mm² % HB

CW617N H 080 10 80 350 140 15 > 80

SEMILAVORATO TRAFILATO IN OTTONE PER TORNERIA / SEMIFINISHED DRAWN IN BRASS FOR MECHANICAL LATHE

Nomativa / Lega Standard / Alloy

Composizione Chimica % Chemical Composition %

Massa Volumica Density

Intervallo di lavorabilità Workability

Cu Pb Sn Fe Zn Kg/dm3 % (100% C360)

UNI EN 12164 / CW614N 57÷59 2,7÷3,0 <0,3 <0,3 Diff. 8,4 90

Lega Alloy

Stato Metall.

Condition

Dimensione (mm) Dimension (mm)

Carico Rottura Rm Breaking Load Rm

Snervamento Rp0,2

Enervation Rp0,2

Allungamento Elongation

da a N/mm² N/mm² % HB

CW614N

R500 2 14 > 500 390 > 8 150

R430 2 40 > 430 250 > 10 120

R360 41 60 > 360 150 > 20 90

NORMATIVA DI RIFERIMENTO / STANDARD UNI EN 1254-4 = “Raccordi combinanti altri terminali di

connessione con terminali di tipo capillare o a compressione”. La norma specifica i materiali, le dimensioni di assemblaggio con relative tolleranze ed i requisiti di prova per i raccordi di rame e leghe di rame.

UNI EN 1254-4 = "Fittings combining other connection terminals with capillary or compression type terminals". The standard specifies the materials, the assembly dimensions with relative tolerances and the test requirements for copper and copper alloy fittings.

FILETTATURA / THREAD Tutte le filettature di attacco alla rete soddisfano la normativa UNI

EN ISO 228-1 “Filettature di tubazioni per accoppiamento non a tenuta sul filetto”, tipo GAS cilindrico.

All threads for network connections according to UNI EN ISO 228- 1 standard "Pipe threads for non-tight coupling on the thread", cylindrical GAS type.

TEMPERATURE E PRESSIONI / PRESSURE AND TEMPERATURE

I raccordi in ottone filettato prevedono una PRESSIONE NOMINALE di 16 bar (PN16) in condizioni standard di lavoro a temperatura 23°C. Nel grafico seguente è possibile estrapolare i valori di pressione e temperatura limite.

Threaded brass fittings have a NOMINAL PRESSURE of 16 bar (PN16) in standard working conditions at a temperature of 23 ° C. In the following graph it is possible to extrapolate the pressure and limit temperature values.

FINITURA E CONFEZIONAMENTO / FINISHING AND PACKAGING La gamma in ottone filettata è disponibile nella doppia versione

con finitura gialla oppure cromata. I raccordi vengono venduti insacchettati in confezione minima di 10 pz fino alla misura 1". Per misure superiori i raccordi sono venduti singolarmente.

Almost the entirety of the threaded brass range is available in the double version with a yellow or chromed plated. Fittings are sold in bags in a minimum pack of 10 pieces up to size 1 ". For larger sizes the fittings are sold individually.

NOTE / NOTES Il produttore si riserva il diritto di variare il dimensionale di

riferimento dei raccordi unicamente nel rispetto delle imposizioni della normativa vigente UNI EN 1254-4. Le fotografie contenute nel presente catalogo sono puramente a scopo indicativo.

The manufacturer reserves the right to change the reference size of the fittings only in compliance with the provisions of the UNI EN 1254-4 legislation in force. The photographs contained in this catalog are for indicative purposes only.

(7)

5

Vite di Prolungamento (Gialla) | Pipe Nipple THD x THD (Yellow) – Art.43G

Misura/Misure Codice/Code Prezzo/Price

inch x mm GIALLO|YELLOW €/cad

1/2" x 40 43G102040 1,38

1/2" x 50 43G102050 1,67

1/2" x 55 43G102055 1,72

1/2" x 60 43G102060 1,82

1/2" x 70 43G102070 1,92

1/2" x 75 43G102075 2,37

1/2" x 80 43G102080 2,51

1/2" x 100 43G102100 3,19

1/2" x 110 43G102110 A Richiesta

1/2" x 120 43G102120 3,83

1/2" x 125 43G102125 3,86

1/2" x 130 43G102130 A Richiesta

1/2" x 150 43G102150 4,56

1/2" x 175 43G102175 5,22

1/2" x 180 43G102180 A Richiesta

1/2" x 200 43G102200 5,90

1/2" x 225 43G102225 6,58

1/2" x 250 43G102250 7,66

1/2" x 300 43G102300 10,39

1/2" x 400 43G102400 13,18

1/2" x 500 43G102500 16,50

1/2" x 600 43G102600 24,37

1/2" x 700 43G102700 A Richiesta

1/2" x 800 43G102800 32,51

1/2" x 900 43G102900 A Richiesta

1/2" x 1000 43G1021000 40,51

3/4" x 40 43G304040 2,09

3/4" x 50 43G304050 2,64

3/4" x 55 43G304055 A Richiesta

3/4" x 60 43G304060 3,12

3/4" x 65 43G304065 3,39

3/4" x 70 43G304070 3,64

3/4" x 75 43G304075 3,86

3/4" x 80 43G304080 4,11

3/4" x 90 43G304090 A Richiesta

3/4" x 100 43G304100 4,75

3/4" x 110 43G304110 A Richiesta

3/4" x 120 43G304120 5,93

3/4" x 125 43G304125 6,49

3/4" x 130 43G304130 A Richiesta

3/4" x 150 43G304150 7,38

3/4" x 160 43G304160 A Richiesta

3/4" x 175 43G304175 8,87

3/4" x 180 43G304180 A Richiesta

3/4" x 200 43G304200 9,78

3/4" x 210 43G304210 A Richiesta

3/4" x 225 43G304225 11,27

3/4" x 250 43G304250 12,48

3/4" x 300 43G304300 14,87

3/4" x 325 43G304325 17,32

3/4" x 400 43G304400 18,71

3/4" x 425 43G304425 23,00

3/4" x 500 43G304500 24,97

3/4" x 525 43G304525 26,95

(8)

6

Vite di Prolungamento (Gialla) | Pipe Nipple THD x THD (Yellow) – Art.43G

3/4" x 600 43G304600 A Richiesta

3/4" x 700 43G304700 A Richiesta

3/4" x 750 43G304750 A Richiesta

3/4" x 800 43G304800 A Richiesta

3/4" x 900 43G304900 A Richiesta

3/4" x 1000 43G3041000 63,25

1" x 40 43G100040 A Richiesta

1" x 50 43G100050 3,28

1" x 60 43G100060 4,22

1" x 65 43G100065 A Richiesta

1" x 70 43G100070 4,84

1" x 75 43G100075 4,92

1" x 80 43G100080 5,24

1" x 90 43G100090 A Richiesta

1" x 100 43G100100 6,30

1" x 120 43G100120 7,58

1" x 125 43G100125 8,06

1" x 130 43G100130 A Richiesta

1" x 150 43G100150 9,61

1" x 175 43G100175 11,14

1" x 180 43G100180 A Richiesta

1" x 200 43G100200 12,86

1" x 225 43G100225 14,61

1" x 240 43G100240 A Richiesta

1" x 250 43G100250 15,87

1" x 270 43G100270 A Richiesta

1" x 300 43G100300 18,75

1" x 400 43G100400 24,68

1" x 425 43G100425 A Richiesta

1" x 500 43G100500 30,60

1" x 525 43G100525 A Richiesta

1" x 500 43G100500 33,60

1" x 800 43G100800 A Richiesta

1" x 900 43G100900 A Richiesta

1" x 1000 43G1001000 A Richiesta

1.1/4" x 40 43G114040 A Richiesta

1.1/4" x 50 43G114050 4,24

1.1/4" x 60 43G114060 5,13

1.1/4" x 70 43G114070 6,69

1.1/4" x 80 43G114080 7,56

1.1/4" x 90 43G114090 8,58

1.1/4" x 100 43G114100 9,54

1.1/4" x 110 43G114110 A Richiesta

1.1/4" x 120 43G114120 11,00

1.1/4" x 130 43G114130 11,76

1.1/4" x 150 43G114150 13,01

1.1/4" x 180 43G114180 16,17

1.1/4" x 200 43G114200 17,34

1.1/4" x 230 43G114230 20,89

1.1/4" x 240 43G114240 A Richiesta

1.1/4" x 250 43G114250 21,72

1.1/4" x 300 43G114300 26,53

1.1/4" x 330 43G114330 29,13

1.1/4" x 400 43G114400 A Richiesta

(9)

7

Vite di Prolungamento (Gialla) | Pipe Nipple THD x THD (Yellow) – Art.43G

1.1/4" x 430 43G114430 37,78

1.1/4" x 500 43G114500 A Richiesta

1.1/4" x 530 43G114530 46,82

1.1/4" x 1000 43G1141000 A Richiesta

1.1/2" x 50 43G112050 8,44

1.1/2" x 60 43G112060 9,14

1.1/2" x 80 43G112080 10,49

1.1/2" x 90 43G112090 10,73

1.1/2" x 100 43G112100 11,88

1.1/2" x 120 43G112120 13,24

1.1/2" x 130 43G112130 13,89

1.1/2" x 150 43G112150 15,71

1.1/2" x 180 43G112180 18,70

1.1/2" x 200 43G112200 20,70

1.1/2" x 230 43G112230 23,73

1.1/2" x 240 43G112240 A Richiesta

1.1/2" x 250 43G112240 A Richiesta

1.1/2" x 300 43G112300 30,74

1.1/2" x 500 43G112500 A Richiesta

2" x 50 43G200050 12,11

2" x 60 43G200060 12,56

2" x 80 43G200080 13,92

2" x 100 43G200100 15,32

2" x 120 43G200120 18,18

2" x 140 43G200140 20,99

2" x 150 43G200150 22,51

2" x 190 43G200190 24,22

2" x 200 43G200200 29,38

2" x 240 43G200240 34,97

2" x 250 43G200250 36,40

2" x 300 43G200300 43,17

2.1/2" x 100 43G212100 A Richiesta

Scorrevole (Giallo) | Male Running Fitting (Yellow) – Art.44G

1/2" x 75 44G102075 3,84

1/2" x 100 44G102100 4,40

1/2" x 150 44G102150 5,36

1/2" x 200 44G102200 7,05

3/4" x 100 44G304100 7,26

3/4" x 150 44G304150 9,24

3/4" x 200 44G304200 11,80

1" x 100 44G100100 A Richiesta

1" x 150 44G100150 12,71

1" x 200 44G100200 16,12

1.1/4" x 100 44G114100 A Richiesta

1.1/4" x 150 44G114150 A Richiesta

1.1/4" x 200 44G114200 A Richiesta

(10)

8

Tappo Ridotto F/F (G/CR) | F/F Reduced Cap (Y/CH) – Art.68G / 68CR

Misura/Misure Codice/Code Prezzo/Price Codice/Code Prezzo/Price

inch x inch GIALLO|YELLOW €/cad CROM.|CHRO. €/cad

3/4" x 3/8" 68G304308 A Richiesta 68CR304308 A Richiesta 1" x 3/8" 68G100308 A Richiesta 68CR100308 A Richiesta

Gomito a 90° F/F (G/CR) | 90° F/F Elbow (Y/CH) – Art.90G / 90CR

Misura/Misure Codice/Code Prezzo/Price Codice/Code Prezzo/Price

inch GIALLO|YELLOW €/cad CROM.|CHRO. €/cad

1/8" 90G000104 1,47 - -

1/4" 90G000104 1,51 90CR00104 2,06

3/8" 90G000308 2,01 90CR00308 2,47

1/2" 90G000102 2,13 90CR00102 2,62

3/4" 90G000304 3,45 90CR00304 4,01

1" 90G000100 5,55 90CR00100 6,58

1.1/4" 90G000114 9,64 90CR00114 A Richiesta

1.1/2" 90G000112 13,44 90CR00112 A Richiesta

2" 90G000200 19,57 90CR00200 A Richiesta

2.1/2" 90G000212 50,16 - -

3" 90G000300 70,65 - -

4" 90G000400 A Richiesta - -

Gomito Rid. a 90° F/F (G/CR) | 90° F/F Red. Elbow (Y/CH) – Art.90RG / 90RCR

1/2" x 3/8" 90RG102308 A Richiesta - -

3/4" x 1/2" 90RG304102 3,43 90RCR304102 4,42 1" x 1/2" 90RG100102 8,68 90RCR100102 A Richiesta 1" x 3/4" 90RG100304 5,19 90RCR100304 6,52

Gomito a 90° M/F (G/CR) | 90° M/F Elbow (Y/CH) – Art.91G / 91CR

1/4" 91G000104 1,82 91CR00104 2,09

3/8" 91G000308 2,05 91CR00308 2,51

1/2" 91G000102 2,23 91CR00102 2,80

3/4" 91G000304 3,71 91CR00304 4,27

1" 91G000100 5,33 91CR00100 6,40

1.1/4" 91G000114 14,25 - -

1.1/2" 91G000112 17,95 - -

2" 91G000200 31,52 - -

2.1/2" 91G000212 A Richiesta - -

3" 91G000300 A Richiesta - -

4" 91G000400 A Richiesta - -

(11)

9

Gomito Rid

^.

a 90° M/F (G/CR)|90° M/F Red . Elbow (Y/CH) – Art.91RG / 91RCR

3/4" x 1/2" 91RG304102 3,42 91RCR304102 A Richiesta 1" x 1/2" 91RG100102 A Richiesta 91RCR100102 A Richiesta 1" x 3/4" 91RG100304 7,06 91RCR100304 A Richiesta

Gomito a 90° M/F con Battuta (G/CR)

– Art.92G / 92CR 90° M/F Elbow with Stop (Y/CH)

1/4" 92G000104 1,64 92CR00104 2,17

3/8" 92G000308 1,94 92CR00308 2,59

1/2" 92G000102 2,48 92CR00102 3,12

3/4" 92G000304 4,16 92CR00304 5,55

1" 92G000100 6,02 92CR00100 6,97

1.1/4" 92G000114 12,79 92CR00114 A Richiesta

1.1/2" 92G000112 14,58 92CR00112 A Richiesta

2" 92G000200 24,23 92CR00200 A Richiesta

2.1/2" 92G000212 53,83 - -

3" 92G000300 73,42 - -

Gomito Ridotto a 90° M/F con Battuta (G/CR)

– Art.92RG / 92RCR 90° M/F Reduced Elbow with Stop (Y/CH)

1/2" x 3/4" 92RG102304 3,31 92RCR102304 A Richiesta

Gomito a 90° M/M con Battuta (G/CR)

– Art.93G / 93CR 90° M/M Elbow with Stop (Y/CH)

3/8" 93G000308 2,15 93CR00308 2,68

1/2" 93G000102 2,64 93CR00102 3,52

3/4" 93G000304 4,12 93CR00304 4,97

1" 93G000100 6,42 93CR00100 7,40

Gomito a 90° F/F Flangiato (G/CR)

– Art.94G / 94CR 90° F/F Flanged Elbow (Y/CH)

1/2" 94G000102 2,78 94CR00102 3,25

(12)

10

Gomito a 90° M/F Flangiato (Giallo)

– Art.94BG 90° M/F Flanged Elbow (Yellow)

inch GIALLO|YELLOW €/cad

1/2" 94BG00102 3,45

Bocchettone Curvo a 90° M/F Sede Piana con Guarniz. (Giallo)

– Art.97G 90° M/F Union Elbow Flat Seat with Gasket (Yellow)

3/8" 97G000308 A Richiesta

1/2" 97G000102 3,97

3/4" 97G000304 6,26

1" 97G000100 9,53

1.1/4" 97G000114 15,86

1.1/2" 97G000112 26,64

2" 97G000200 50,81

Bocchettone Curvo a 90° M/F Tenuta O-Ring (G/CR)

– Art.98G / 98CR 90° M/F Union Elbow Taper Seat with ORing (Y/CH)

3/8" * 98G000308 3,25 98CR00308 A Richiesta

1/2" 98G000102 4,67 98CR00102 4,83

3/4" 98G000304 6,87 98CR00304 7,14

1" 98G000100 12,62 98CR00100 13,13

1.1/4" 98G000114 16,85 98CR00114 17,56

1.1/2" 98G000112 28,03 98CR00112 29,11

2" 98G000200 47,69 98CR00200 49,59

* = per questa misura la tenuta è meccanica (senza o-ring) / meachanical tight (without oring)

Gomito a 45° F/F (Giallo) | 45° F/F Elbow (Yellow) – Art.120G

1/2" 120G000102 3,97

3/4" 120G000304 5,25

1" 120G000100 7,22

1.1/4" 120G000114 9,38

1.1/2" 120G000112 12,00

2" 120G000200 17,30

Gomito a 45° M/F (Giallo) | 45° M/F Elbow (Yellow) – Art.121G

1/2" 121G000102 4,01

3/4" 121G000304 5,62

1" 121G000100 7,36

1.1/4" 121G000114 A Richiesta

1.1/2" 121G000112 A Richiesta

2" 121G000200 20,19

(13)

11

Tee F/F/F (G/CR) | F/F/F Tee (Y/CH) – Art.130G / 130CR

1/4" 130G00104 1,91 130CR0104 2,30

3/8" 130G00308 2,37 130CR0308 2,98

1/2" 130G00102 2,99 130CR0102 3,64

3/4" 130G00304 4,06 130CR0304 4,78

1" 130G00100 6,78 130CR0100 7,67

1.1/4" 130G00114 11,43 130CR0114 A Richiesta

1.1/2" 130G00112 14,45 130CR0112 A Richiesta

2" 130G00200 21,42 130CR0200 A Richiesta

2.1/2" 130G00212 49,25 - -

3" 130G00300 65,79 - -

4" 130G00400 111,18

Tee Ridotto F/F/F (G/CR) | F/F/F Reduced Tee (Y/CH) – Art.130RG / 130RCR

Misura/Misure Codice/Code Prezzo/Price Codice/Code Prezzo/Price inch x inch x inch GIALLO|YELLOW €/cad CROM.|CHRO. €/cad

1/2"x3/8"x1/2" 130RG102308102 A Richiesta - - 3/4"x1/2"x1/2" 130RG304102102 A Richiesta - - 3/4"x1/2"x3/4" 130RG304102304 3,80 130RCR304102 4,76 3/4"x3/4"x1/2" 130RG304304102 A Richiesta - -

1"x1/2"x1" 130RG100102100 6,90 130RCR100102 8,64 1"x3/4"x1" 130RG100304100 6,44 130RCR100304 8,07 1"x1"x1/2" 130RG100100102 A Richiesta - - 1.1/4"x1"x1.1/4" 130RG114100114 14,40 - - 2"x1"x2" 130RG200100200 A Richiesta - -

Tee F/M/F (Giallo) – Art.133G

inch x inch x inch GIALLO|YELLOW €/cad

1/4" x 1/4" x 1/4" 133G104104104 2,05 1/2" x 1/2" x 1/2" 133G102102102 3,57 3/4" x 3/4" x 3/4" 133G304304304 5,55 1" x 1 "x 1" 133G100100100 9,78

Tee Ridotto F/M/F (Giallo) | F/M/F Reduced Tee (Yellow) – Art.133RG

inch x inch x inch GIALLO|YELLOW €/cad

1" x 1/2" x 1" 133RG100102100 8,66 1" x 3/4" x 1" 133RG100304100 7,96

(14)

12

Tee F/F/M (Giallo) | F/F/M Tee (Yellow) – Art.134G

1/4" 134G00104 2,08

1/2" 134G00102 3,58

3/4" 134G00304 4,79

1" (h=72mm) 134G00100 6,95

1.1/2" 134G00112 16,76

Tee M/M/M (Giallo) | M/M/M Tee (Yellow) – Art.135G

1/4" 135G00104 2,05

3/8" 135G00308 2,19

Croce F/F/F/F (G/CR) | F/F/F/F Cross (Y/CH) – Art.180G / 180CR

1/2" 180G00102 4,72 180CR0102 5,11

3/4" 180G00304 7,54 180CR0304 8,15

1" 180G00100 12,73 180CR0100 13,76

1.1/4" 180G00114 20,78 180CR0114 22,43

1.1/2" 180G00112 28,31 180CR0112 30,57

2" 180G00200 41,29 180CR0200 44,60

Manicotto Ridotto F/F (G/CR) | F/F Red. Coupling (Y/CH) – Art.240G / 240CR

1/4" x 1/8" 240G104108 0,87 240CR104108 1,07 3/8" x 1/4" 240G308104 1,11 240CR308104 1,18

1/2" x 1/4" 240G102104 1,44 - -

1/2" x 3/8" 240G102308 1,20 240CR102308 1,41

3/4" x 1/4" 240G304104 A Richiesta - -

3/4" x 3/8" 240G304308 2,17 - -

3/4" x 1/2" 240G304102 1,90 240CR304102 2,24 1" x 3/8" 240G100308 3,30 240CR100308 4,12 1" x 1/2" 240G100102 3,06 240CR100102 3,89 1" x 3/4" 240G100304 3,45 240CR100304 4,25 1.1/4" x 1/2" 240G114102 6,24 240CR114102 6,91 1.1/4" x 3/4" 240G114304 5,89 240CR114304 6,55 1.1/4" x 1" 240G114100 5,08 240CR114100 5,73 1.1/2" x 1/2" 240G112102 6,50 240CR112102 7,13 1.1/2" x 3/4" 240G112304 6,02 240CR112304 6,67 1.1/2" x 1" 240G112100 7,93 240CR112100 8,96 1.1/2"x1.1/4" 240G112114 7,08 240CR112114 8,11

2" x 3/4" 240G200304 8,30 240CR200304 A Richiesta 2" x 1" 240G200100 13,12 240CR200100 A Richiesta 2" x 1.1/4" 240G200114 12,27 240CR200114 A Richiesta 2" x 1.1/2" 240G200112 11,80 240CR200112 A Richiesta

2.1/2" x 2" 240G212200 23,13 - -

(15)

13

Riduzione Esagonale M/F (G/CR) | M/F Bushing (Y/CH) – Art.241G / 241CR

1/4" x 1/8" 241G104108 0,38 241CR104108 0,59 3/8" x 1/8" 241G308108 0,60 241CR308108 0,80 3/8" x 1/4" 241G308104 0,55 241CR308104 0,72 1/2" x 1/4" 241G102104 0,72 241CR102104 0,90 1/2" x 3/8" 241G102308 0,64 241CR102308 0,83 3/4" x 1/4" 241G304104 1,91 241CR304104 2,18 3/4" x 3/8" 241G304308 1,38 241CR304308 1,61 3/4" x 1/2" 241G304102 0,99 241CR304102 1,34

1" x 1/4" 241G100104 A Richiesta 241CR100104 A Richiesta 1" x 3/8" 241G100308 2,86 241CR100308 3,14 1" x 1/2" 241G100102 2,62 241CR100102 2,89 1" x 3/4" 241G100304 2,05 241CR100304 2,31 1.1/4" x 1/2" 241G114102 4,24 241CR114102 A Richiesta 1.1/4" x 3/4" 241G114304 3,88 241CR114304 4,28

1.1/4" x 1" 241G114100 2,99 241CR114100 3,67 1.1/2" x 1/2" 241G112102 6,36 241CR112102 A Richiesta 1.1/2" x 3/4" 241G112304 5,99 241CR112304 6,36

1.1/2" x 1" 241G112100 5,00 241CR112100 5,43 1.1/2"x1.1/4" 241G112114 A Richiesta 241CR112114 4,57

2" x 1/2" 241G200102 8,88 241CR200102 A Richiesta 2" x 3/4" 241G200304 8,52 241CR200304 9,15

2" x 1" 241G200100 7,99 241CR200100 A Richiesta 2" x 1.1/4" 241G200114 6,87 241CR200114 A Richiesta 2" x 1.1/2" 241G200112 6,03 241CR200112 A Richiesta

2.1/2"x1.1/4" 241G212114 17,19 - -

2.1/2"x1.1/2" 241G212112 18,08 - -

2.1/2" x 2" 241G212200 18,34 241CR212200 A Richiesta 3" x 1.1/4" 241G300114 32,07 241CR300114 A Richiesta 3" x 1.1/2" 241G300112 31,20 241CR300112 A Richiesta 3" x 2" 241G300200 26,93 241CR300200 A Richiesta 3" x 2.1/2" 241G300212 24,46 241CR300212 A Richiesta 4" x 2" 241G400200 76,19 241CR400200 A Richiesta 4" x 2.1/2" 241G400212 69,98 241CR400212 A Richiesta 4" x 3" 241G400300 58,16 241CR400300 A Richiesta

Nipplo Ridotto (G/CR) | Reduced Nipple (Y/CH) – Art.245G / 245CR

1/4" x 1/8" 245G104108 0,57 245CR104108 0,72 3/8" x 1/8" 245G308108 A Richiesta 245CR308108 1,48 3/8" x 1/4" 245G308104 0,71 245CR308104 0,90 1/2" x 1/4" 245G102104 0,95 245CR102104 1,17 1/2" x 3/8" 245G102308 1,03 245CR102308 1,23 3/4" x 3/8" 245G304308 1,71 245CR304308 1,90 3/4" x 1/2" 245G304102 1,42 245CR304102 1,69 1" x 1/2" 245G100102 2,78 245CR100102 3,06 1" x 3/4" 245G100304 2,60 245CR100304 2,86 1.1/4" x 1/2" 245G114102 4,02 245CR114102 A Richiesta 1.1/4" x 3/4" 245G114304 3,86 245CR114304 A Richiesta

1.1/4" x 1" 245G114100 3,79 245CR114100 4,28 1.1/2" x 3/4" 245G112304 5,60 245CR112304 6,53

1.1/2" x 1" 245G112100 5,49 245CR112100 A Richiesta

(16)

14

Misura/Misure Codice/Code Prezzo/Price Codice/Code Prezzo/Price inch x inch GIALLO|YELLOW €/cad CROM.|CHRO. €/cad 1.1/2"x1.1/4" 245G112114 5,26 245CR112114 6,17

2" x 1" 245G200100 12,26 - -

2" x 1.1/4" 245G200114 9,87 245CR200114 11,00 2" x 1.1/2" 245G200112 9,88 245CR200112 11,27

2.1/2 "x 2" 245G212200 22,09 - -

3" x 2" 245G300200 25,69 - -

3" x 2.1/2" 245G300212 25,69 - -

4" x 2.1/2" 245G400212 65,46 - -

4" x 3" 245G400300 65,46 - -

Riduzione F/M (G/CR) | F/M Reduction (Y/CH) – Art.246G / 246CR

1/4" x 1/8" 246G104108 0,56 246CR104108 0,72 3/8" x 1/4" 246G308104 0,72 246CR308104 0,92 1/2" x 1/4" 246G102104 0,82 246CR102104 1,03 1/2" x 3/8" 246G102308 0,87 246CR102308 1,07 3/4" x 3/8" 246G304308 1,33 246CR304308 1,59 3/4" x 1/2" 246G304102 1,49 246CR304102 1,75 1" x 1/2" 246G100102 2,09 246CR100102 2,43 1" x 3/4" 246G100304 2,16 246CR100304 2,59 1.1/4" x 1/2" 246G114102 4,41 246CR114102 4,98 1.1/4" x 3/4" 246G114304 4,52 246CR114304 5,06 1.1/4" x 1" 246G114100 4,53 246CR114100 5,25 1.1/2" x 1/2" 246G112102 5,70 246CR112102 6,36 1.1/2" x 3/4" 246G112304 5,70 246CR112304 6,36 1.1/2" x 1" 246G112100 6,34 246CR112100 6,81 1.1/2"x1.1/4" 246G112114 6,39 246CR112114 6,68 2" x 1" 246G200100 7,48 246CR200100 8,19 2" x 1.1/4" 246G200114 8,23 246CR200114 8,95 2" x 1.1/2" 246G200112 8,05 246CR200112 8,75

Morsetto per Tubo Ferro | Steel Pipe Clamp – Art.250

Misura/Misure

Codice/Code Prezzo/Price

inch x inch €/cad

1/2" x 1/2" 250102102 6,50

3/4" x 1/2" 250304102 9,08

Ghiera M/F (G/CR) | M/F Reducing Ring (Y/CH) – Art.260G / 260CR

3/8" x 1/4" 260G308104 0,36 260CR308104 A Richiesta 1/2" x 1/4" 260G102104 0,55 260CR102104 0,66 1/2" x 3/8" 260G102308 0,48 260CR102308 0,59 3/4" x 3/8" 260G304308 A Richiesta 260CR304308 A Richiesta 3/4" x 1/2" 260G304102 0,61 260CR304102 0,76

1" x 1/2" 260G100102 1,14 260CR100102 1,33 1" x 3/4" 260G100304 1,05 260CR100304 1,28 1.1/4" x 1" 260G114100 1,56 260CR114100 A Richiesta

1.1/2" x 1" 260G112100 3,65 - -

1.1/2"x1.1/4" 260G112114 2,07 260CR112114 A Richiesta 2" x 3/4" 260G200304 12,50 260CR200304 14,38

2" x 1" 260G200100 11,25 260CR200100 A Richiesta 2" x 1.1/4" 260G200114 8,68 260CR200114 9,99 2" x 1.1/2" 260G200112 7,99 260CR200112 9,38

(17)

15

Manicotto F/F (G/CR) | F/F Coupling (Y/CH) – Art.270G / 270CR

1/8" 270G00108 0,45 270CR0108 0,61

1/4" 270G00104 0,56 270CR0104 0,72

3/8" 270G00308 1,00 270CR0308 1,14

1/2" 270G00102 1,47 270CR0102 1,64

3/4" 270G00304 2,15 270CR0304 2,34

1" 270G00100 4,08 270CR0100 4,75

1.1/4" 270G00114 5,15 270CR0114 5,84

1.1/2" 270G00112 6,46 270CR0112 7,14

2" 270G00200 10,38 270CR0200 11,33

2.1/2" 270G00212 24,46 - -

3" 270G00300 34,73 - -

Nipplo Esagonale (G/CR) | Hexagonal Nipple (Y/CH) – Art.280G / 280CR

1/8" 280G00108 0,38 280CR0108 0,59

1/4" 280G00104 0,56 280CR0104 0,72

3/8" 280G00308 0,68 280CR0308 0,82

1/2" 280G00102 0,90 280CR0102 1,05

3/4" 280G00304 1,49 280CR0304 1,69

1" 280G00100 3,04 280CR0100 3,31

1.1/4" 280G00114 3,78 280CR0114 4,09

1.1/2" 280G00112 5,37 280CR0112 6,28

2" 280G00200 8,97 280CR0200 10,25

2.1/2" 280G00212 17,44 - -

3" 280G00300 25,69 - -

4" 280G00400 65,46 - -

Tappo M T.E. (G/CR) | Male Plug H.H. (Y/CH) – Art.290G / 290CR

1/8" 290G00108 0,38 290CR0108 0,55

1/4" 290G00104 0,43 290CR0104 0,60

3/8" 290G00308 0,56 290CR0308 0,71

1/2" 290G00102 0,66 290CR0102 0,92

3/4" 290G00304 1,28 290CR0304 1,52

1" 290G00100 2,07 290CR0100 2,43

1.1/4" 290G00114 A Richiesta - -

1.1/2" 290G00112 5,19 - -

2" 290G00200 A Richiesta - -

Tappo M con Bordo (G/CR) | M Plug with Edge (Y/CH) – Art.290QG / 290QCR

Misure 1/2" e 3/8" con Quadro, altre misure con Esagono | Misure 1/2" and 3/8” squared, other misure hexagonal

1/8" 290QG00108 0,64 - -

1/4" 290QG00104 0,76 - -

3/8" 290QG00308 0,76 290QCR0308 0,88

1/2" 290QG00102 0,95 290QCR0102 1,14

3/4" 290QG00304 1,38 290QCR0304 1,58

1" 290QG00100 2,09 290QCR0100 2,30

1.1/4" 290QG00114 3,29 290QCR0114 3,68

1.1/2" 290QG00112 4,12 290QCR0112 4,52

2" 290QG00200 6,10 290QCR0200 6,47

2.1/2" 290QG00212 17,15 290QCR0212 19,73

3" 290QG00300 20,57 290QCR0300 23,64

(18)

16

Tappo F (G/CR) | F Cap (Y/CH) – Art.300G / 300CR

1/8" 300G00108 0,38 300CR0108 0,50

1/4" 300G00104 0,46 300CR0104 0,59

3/8" 300G00308 0,55 300CR0308 0,72

1/2" 300G00102 0,68 300CR0102 0,84

3/4" 300G00304 1,03 300CR0304 1,33

1" 300G00100 1,61 300CR0100 1,82

1.1/4" 300G00114 2,41 300CR0114 2,83

1.1/2" 300G00112 3,28 300CR0112 3,68

2" 300G00200 5,49 300CR0200 6,30

2.1/2" 300G00212 7,96 - -

Controdado (G/CR) | Backnut (Y/CH) – Art.310G / 310CR

1/8" 310G00108 0,31 310CR0108 0,45

1/4" 310G00104 0,33 310CR0104 0,50

3/8" 310G00308 0,36 310CR0308 0,59

1/2" 310G00102 0,55 310CR0102 0,76

3/4" 310G00304 0,72 310CR0304 1,00

1" 310G00100 1,18 310CR0100 1,47

1.1/4" 310G00114 2,42 310CR0114 2,77

1.1/2" 310G00112 4,97 - -

2" 310G00200 6,25 - -

Controdado Flangiato (Giallo) | Flanged Backnut (Yellow) – Art.310FG

1/2" 310FG0102 0,99

3/4" 310FG0304 1,21

1" 310FG0100 1,60

1.1/4" 310FG0114 2,24

1.1/2" 310FG0112 2,67

2" 310FG0200 3,18

Portagomma M (G/CR) | Male Hose (Y/CH) – Art.315G / 315CR

inch x mm GIALLO|YELLOW €/cad CROM.|CHRO. €/cad

1/8" x 6 315G108006 1,20 - -

1/8" x 8 315G108008 1,20 - -

1/8" x 10 315G108010 0,57 315CR108010 0,68

1/8" x 14 315G108014 0,64 315CR108014 A Richiesta

1/4" x 06 315G104006 1,34 - -

1/4" x 08 315G104008 1,34 - -

1/4" x 10 315G104010 0,66 315CR104010 0,80

1/4" x 13 315G104013 1,37 - -

1/4" x 14 315G104014 0,69 315CR104014 0,86

3/8" x 10 315G308010 0,84 315CR308010 1,03

3/8" x 12 315G308012 0,84 315CR308012 A Richiesta

3/8" x 13 315G308013 1,47 - -

(19)

17

inch x mm GIALLO|YELLOW €/cad CROM.|CHRO. €/cad

3/8" x 14 315G308014 0,84 315CR308014 1,07

3/8" x 15 315G308015 1,51 - -

1/2" x 10 315G102010 1,17 315CR102010 1,36

1/2" x 12 315G102012 1,14 315CR102012 1,38

1/2" x 13 315G102013 2,12 - -

1/2" x 14 315G102014 1,18 315CR102014 1,42

1/2" x 15 315G102015 2,12 - -

1/2" x 16 315G102016 1,18 315CR102016 1,42

1/2" x 18 315G102018 1,24 315CR102018 1,44

1/2" x 20 315G102020 1,42 315CR102020 1,66

1/2" x 25 315G102025 2,17 315CR102025 A Richiesta

3/4" x 13 315G304013 3,53 - -

3/4" x 15 315G304015 A Richiesta - -

3/4" x 16 315G304016 3,28 - -

3/4" x 18 315G304018 2,84 - -

3/4" x 20 315G304020 2,17 315CR304020 2,60

3/4" x 22 315G304022 3,25 - -

3/4" x 25 315G304025 2,17 315CR304025 2,60

3/4" x 27 315G304027 A Richiesta - -

1" x 20 315G100020 3,84 - -

1" x 25 315G100025 3,30 315CR100025 3,95

1" x 27 315G100027 4,13 - -

1" x 30 315G100030 3,30 315CR100030 3,95

1" x 32 315G100032 5,02 - -

1.1/4" x 26 315G114026 A Richiesta - -

1.1/4" x 30 315G114030 6,02 315CR114030 A Richiesta

1.1/4" x 32 315G114032 6,02 - -

1.1/4" x 35 315G114035 6,58 315CR114035 10,38

1.1/4" x 39 315G114039 8,28 - -

1.1/4" x 40 315G114040 8,28 315CR114040 12,97

1.1/2" x 38 315G112038 10,32 - -

1.1/2" x 40 315G112040 9,52 315CR112040 A Richiesta 1.1/2" x 45 315G112045 11,35 315CR112045 14,19

1.1/2" x 50 315G112050 12,56 - -

2" x 50 315G200050 14,41 315CR200050 A Richiesta

2" x 51 315G200051 14,41 - -

2" x 60 315G200060 22,71 - -

2.1/2" x 60 315G212060 32,01 315CR212060 42,22

2.1/2" x 63 315G212063 32,01 - -

2.1/2" x 70 315G212070 34,88 - -

3" x 76 315G300076 44,04 - -

3" x 80 315G300080 46,19 - -

4" x 100 315G400100 66,75 - -

4" x 102 315G400102 66,75 - -

Portagomma F (G/CR) | Female Hose (Y/CH) – Art.316G / 316CR

1/8" x 08 316G108008 A Richiesta - -

1/8" x 10 316G108010 0,71 316CR108010 A Richiesta

1/8" x 14 316G108014 0,77 316CR108014 0,87

1/4" x 10 316G104010 0,78 316CR104010 1,01

1/4" x 13 316G104013 1,54 - -

1/4" x 14 316G104014 0,84 316CR104014 1,06

(20)

18

inch x mm GIALLO|YELLOW €/cad CROM.|CHRO. €/cad

3/8" x 10 316G308010 0,99 316CR308010 1,23

3/8" x 12 316G308012 0,99 316CR308012 1,23

3/8" x 13 316G308013 1,78 - -

3/8" x 14 316G308014 0,99 316CR308014 1,23

3/8" x 15 316G308015 1,78 - -

1/2" x 10 316G102010 1,47 316CR102010 1,72

1/2" x 12 316G102012 1,47 316CR102012 1,72

1/2" x 13 316G102013 2,32 - -

1/2" x 14 316G102014 1,49 316CR102014 1,74

1/2" x 15 316G102015 2,32 - -

1/2" x 16 316G102016 1,52 316CR102016 1,76

1/2" x 18 316G102018 1,90 316CR102018 2,17

1/2" x 20 316G102020 2,02 316CR102020 2,30

3/4" x 20 316G304020 2,63 316CR304020 3,04

3/4" x 25 316G304025 2,63 316CR304025 3,04

1" x 25 316G100025 3,84 316CR100025 A Richiesta

1" x 27 316G100027 A Richiesta - -

1" x 30 316G100030 3,84 316CR100030 A Richiesta 1.1/4" x 30 316G114030 7,01 316CR114030 17,63

1.1/4" x 32 316G114032 7,01 - -

1.1/4" x 35 316G114035 7,71 316CR114035 17,63 1.1/2" x 40 316G112040 9,09 316CR112040 25,60

2" x 50 316G200050 16,70 316CR200050 35,62

Raccordo a 5 Vie per Pompe (G) | 5 Way Fitting for Pumps (Y) – Art.318G

inch x inch x mm GIALLO|YELLOW €/cad

1" x 1/4" x h=72 318G100072 A Richiesta 1" x 1/4" x h=82 318G100082 A Richiesta 1" x 1/4" x h=91 318G100091 A Richiesta

Bocchettone M/F Sede Piana (G/CR)

– Art.331G / 331CR M/F Union Flat Seat (Y/CH)

3/8" 331G00308 5,69 - -

1/2" 331G00102 3,65 331CR0102 3,78

3/4" 331G00304 5,34 331CR0304 A Richiesta

1" 331G00100 8,79 331CR0100 A Richiesta

1.1/4" 331G00114 13,80 331CR0114 A Richiesta

1.1/2" 331G00112 23,13 331CR0112 A Richiesta

2" 331G00200 43,53 331CR0200 A Richiesta

Bocchettone M/M Sede Conica con ORing (G/CR)

– Art.340G / 340CR M/M Union Taper Seat with ORing (Y/CH)

1/2" 340G00102 4,24 340CR0102 4,40

3/4" 340G00304 6,77 340CR0304 7,04

1" 340G00100 11,51 340CR0100 11,85

(21)

19

Bocchettone M/F Sede Conica con ORing (G/CR)

– Art.341G / 341CR M/F Union Taper Seat with ORing (Y/CH)

3/8" * 341G00308 2,78 341CR0308 A Richiesta

1/2" 341G00102 3,45 341CR0102 3,59

3/4" 341G00304 5,08 341CR0304 5,29

1" 341G00100 8,86 341CR0100 9,20

1.1/4" 341G00114 12,73 341CR0114 13,23

1.1/2" 341G00112 20,88 341CR0112 21,73

2" 341G00200 37,63 341CR0200 39,14

2.1/2" 341G00212 A Richiesta - -

* = per questa misura la tenuta standard è meccanica (senza o-ring).

Disponibile a richiesta anche la versione con tenuta o-ring (sino ad esaurimento scorte).

* = mechanical tight without oring.

Also available on request oring version (while stocks last)

Bocchettone F/F Sede Conica (G/CR)

– Art.342G / 342CR F/F Union Taper Seat (Y/CH)

1/2" 342G00102 4,78 342CR0102 5,16

3/4" 342G00304 6,63 342CR0304 7,17

1" 342G00100 10,06 342CR0100 10,87

1.1/4" 342G00114 15,06 342CR0114 A Richiesta

1.1/2" 342G00112 29,61 342CR0112 A Richiesta

2" 342G00200 56,14 342CR0200 A Richiesta

2.1/2" 342G00212 A Richiesta - -

Codolo Diritto Sede Piana (G) | Union Male End Flat Seat (Y) – Art.344G

Misura/Misure Codice/Code 345G da Abbinare Prezzo/Price

inch GIALLO|YELLOW 345G to Combine €/cad

3/8" 344G00308 1/2" 0,81

1/2" 344G00102 3/4" 1,14

3/4" 344G00304 1" 1,90

1" 344G00100 1.1/4" 3,12

1.1/4" 344G00114 1.1/2" 4,71

1.1/2" 344G00112 2" 7,96

2" 344G00200 2.1/2" 17,26

(22)

20

Calotta Sede Piana (Gialla) | Union Nut Flat Seat (Y) – Art.345G

Misura/Misure Codice/Code 344G da Abbinare Prezzo/Price

inch GIALLO|YELLOW 344G to Combine €/cad

1/2" 345G00102 3/8" 0,85

3/4" 345G00304 1/2" 0,88

1" 345G00100 3/4" 1,33

1.1/4" 345G00114 1" 2,54

1.1/2" 345G00112 1.1/4" 2,98

2" 345G00200 1.1/2" 5,32

2.1/4" 345G00214 Foro Ø 59 mm 7,92

2.1/2" 345G00212 2" 8,56

2.3/4" 345G00234 Foro Ø 75 mm 13,57

Raccordo 2 pz F/F con Guarniz. (G) | 2 Pcs Fitting with Gasket (Y) – Art.347G

Misura/Misura Codice/Code Prezzo/Price

inch x inch GIALLO|YELLOW €/cad

1/2" x 1" 347G102100 2,98

1/2" x 1.1/4" 347G102114 A Richiesta

3/4" x 1.1/4" 347G304114 5,01

3/4" x 1.1/2" 347G304112 6,74

1" x 1.1/2" 347G100112 6,22

1" x 2" 347G100200 A Richiesta

1.1/4" x 2" 347G114200 9,48

1.1/2" x 2.1/4" 347G112214 14,86

2" x 2.3/4" 347G200234 22,51

Kit per Pompe con Guarnizione (G) | Pump Kit with Gasket (Y) – Art.348G

inch x inch GIALLO|YELLOW €/cad

1" x 1.1/2" 348G100112 A Richiesta

Nipplo Tutto Filetto (G) | Running Nipple (Y) – Art.531G

1/4" 531G000104 0,58

3/8" 531G000308 0,74

1/2" 531G000102 1,05

3/4" 531G000304 1,61

1" 531G000100 2,24

1.1/4" 531G000114 A Richiesta

(23)

21

Prolunga M/F (G/CR) | M/F Extension (Y/CH) – Art.520G / 520CR

3/8" x 10 520G308010 0,95 520CR308010 1,35

3/8" x 15 520G308015 1,12 520CR308015 1,51

3/8" x 20 520G308020 1,30 520CR308020 1,72

3/8" x 25 520G308025 1,47 520CR308025 1,90

3/8" x 30 520G308030 1,78 520CR308030 2,30

3/8" x 40 520G308040 2,16 520CR308040 2,71

3/8" x 50 520G308050 2,77 520CR308050 3,49

3/8" x 60 520G308060 4,16 520CR308060 A Richiesta 3/8" x 70 520G308070 A Richiesta 520CR308070 A Richiesta 3/8" x 80 520G308080 A Richiesta 520CR308080 A Richiesta 3/8" x 100 520G308100 6,40 520CR308100 A Richiesta

1/2" x 10 520G102010 1,14 520CR102010 1,52

1/2" x 15 520G102015 1,49 520CR102015 1,90

1/2" x 20 520G102020 1,72 520CR102020 2,13

1/2" x 25 520G102025 1,97 520CR102025 2,43

1/2" x 30 520G102030 2,17 520CR102030 2,75

1/2" x 40 520G102040 2,64 520CR102040 3,29

1/2" x 50 520G102050 3,31 520CR102050 4,03

1/2" x 55 520G102055 3,52 520CR102055 A Richiesta

1/2" x 60 520G102060 3,88 520CR102060 4,67

1/2" x 65 520G102065 A Richiesta 520CR102065 A Richiesta

1/2" x 70 520G102070 4,42 520CR102070 5,15

1/2" x 80 520G102080 4,99 520CR102080 5,67

1/2" x 100 520G102100 6,11 520CR102100 7,83

3/4" x 10 520G304010 1,71 520CR304010 2,29

3/4" x 15 520G304015 2,05 520CR304015 2,69

3/4" x 20 520G304020 2,37 520CR304020 3,06

3/4" x 25 520G304025 2,50 520CR304025 3,25

3/4" x 30 520G304030 2,99 520CR304030 3,83

3/4" x 40 520G304040 3,64 520CR304040 4,47

3/4" x 50 520G304050 4,00 520CR304050 4,77

3/4" x 60 520G304060 4,71 520CR304060 5,70

3/4" x 70 520G304070 5,32 520CR304070 6,22

3/4" x 80 520G304080 6,07 520CR304080 7,02

3/4" x 100 520G304100 7,36 520CR304100 8,84

1" x 10 520G100010 2,15 520CR100010 2,88

1" x 15 520G100015 2,69 520CR100015 3,55

1" x 20 520G100020 3,23 520CR100020 4,22

1" x 25 520G100025 3,78 520CR100025 4,92

1" x 30 520G100030 4,29 520CR100030 5,45

1" x 40 520G100040 5,37 520CR100040 6,74

1" x 50 520G100050 6,49 520CR100050 8,08

1" x 80 520G100080 A Richiesta 520CR100080 A Richiesta 1.1/4" x 15 520G114015 A Richiesta 520CR114015 A Richiesta 1.1/4" x 20 520G114020 A Richiesta 520CR114020 A Richiesta 1.1/4" x 30 520G114030 A Richiesta 520CR114030 A Richiesta 1.1/4" x 40 520G114040 A Richiesta 520CR114040 A Richiesta

(24)

22

NOTE / NOTES:

(25)

23