SAFETY INFORMATION

(1)

TACTICAL

(2)

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE’s prior written permission.

• In order to assist in the use of this monitor, carefully read the User Guide.

• For more information, check on our website at:

https://www.gigabyte.com

(3)

SAFETY INFORMATION

Regulatory Notices

United States of America, Federal Communications Commission Statement

Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information Product Name: LCD monitor

Trade Name: GIGABYTE Model Number: AORUS FV43U

Responsible Party – U.S. Contact Information: G.B.T. Inc.

Address: 17358 Railroad street, City Of Industry, CA91748 Tel.: 1-626-854-9338

Internet contact information: https://www.gigabyte.com FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

(4)

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.

Avis de conformité à la réglementation d’Industrie Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

European Union (EU) CE Declaration of Conformity

This device complies with the following directives: Electromagnetic Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/

EU, ErP Directive 2009/125/EC, RoHS directive (recast) 2011/65/EU & the 2015/863 Statement.

This product has been tested and found to comply with all essential requirements of the Directives.

European Union (EU) RoHS (recast) Directive 2011/65/EU &

the European Commission Delegated Directive (EU) 2015/863 Statement

GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr⁺⁶, PBDE, PBB, DEHP, BBP, DBP and DIBP). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals.

European Union (EU) Community Waste Electrical & Electronic Equipment (WEEE) Directive Statement

GIGABYTE will fulfill the national laws as interpreted from the 2012/19/

EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive.

The WEEE Directive specifies the treatment, collection, recycling and disposal of electric and electronic devices and their components. Under the Directive, used equipment must be marked, collected separately, and disposed of properly.

(5)

WEEE Symbol Statement

The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.

For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling.

End of Life Directives-Recycling

The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure.

Déclaration de Conformité aux Directives de l’Union européenne (UE)

Cet appareil portant la marque CE est conforme aux directives de l’UE suivantes: directive Compatibilité Electromagnétique 2014/30/UE, directive Basse Tension 2014/35/UE, directive 2009/125/CE en matière d’écoconception, la directive RoHS II 2011/65/UE & la déclaration 2015/863.

La conformité à ces directives est évaluée sur la base des normes européennes harmonisées applicables.

European Union (EU) CE-Konformitätserklärung

Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU- Richtlinien: EMV-Richtlinie 2014/30/EU, Niederspannungsrichtlinie 2014/30/EU, Ökodesign-Richtlinie 2009/125/EC, RoHS-Richtlinie

(6)

CE declaração de conformidade

Este produto com a marcação CE estão em conformidade com das seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/EU; Diretiva CEM 2014/30/EU; Diretiva Conceção Ecológica 2009/125/CE; Diretiva RSP 2011/65/UE e a declaração 2015/863.

A conformidade com estas diretivas é veriﬁcada utilizando as normas europeias harmonizadas.

CE Declaración de conformidad

Este producto que llevan la marca CE cumplen con las siguientes Directivas de la Unión Europea: Directiva EMC 2014/30/EU, Directiva de bajo voltaje 2014/35/EU, Directiva de Ecodiseño 2009/125/EC, Directiva RoHS 2011/65/EU y la Declaración 2015/863.

El cumplimiento de estas directivas se evalúa mediante las normas europeas armonizadas.

CE Dichiarazione di conformità

I prodotti con il marchio CE sono conformi con una o più delle seguenti Direttive UE, come applicabile: Direttiva EMC 2014/30/UE, Direttiva sulla bassa tensione 2014/35/UE, Direttiva Ecodesign EMC 2009/125/EC, Direttiva RoHS 2011/65/EU e Dichiarazione 2015/863.

La conformità con tali direttive viene valutata utilizzando gli Standard europei armonizzati applicabili.

Deklaracja zgodności UE Unii Europejskiej

Urządzenie jest zgodne z następującymi dyrektywami: Dyrektywa kompatybilności elektromagnetycznej 2014/30/UE, Dyrektywa

niskonapięciowej 2014/35/UE, Dyrektywa ErP 2009/125/WE, Dyrektywa RoHS 2011/65/UE i dyrektywa2015/863.

Niniejsze urządzenie zostało poddane testom i stwierdzono jego zgodność z wymaganiami dyrektywy.

ES Prohlášení o shodě

Toto zařízení splňuje požadavky Směrnice o Elektromagnetické kompatibilitě 2014/30/EU, Směrnice o Nízkém napětí 2014/35/EU, Směrnice ErP 2009/125/ES, Směrnice RoHS 2011/65/EU a 2015/863.

Tento produkt byl testován a bylo shledáno, že splňuje všechny základní požadavky směrnic.

(7)

EK megfelelőségi nyilatkozata

A termék megfelelnek az alábbi irányelvek és szabványok

követelményeinek, azok a kiállításidőpontjában érvényes, aktuális változatában: EMC irányelv 2014/30/EU, Kisfeszültségű villamos berendezésekre vonatkozó irányelv2014/35/EU, Környezetbarát tervezésről szóló irányelv 2009/125/EK, RoHS irányelv 2011/65/EU és 2015/863.

Δήλωση συμμόρφωσης ΕΕ

Είναι σε συμμόρφωση με τις διατάξεις των παρακάτω Οδηγιών της Ευρωπαϊκής Κοινότητας: Οδηγία 2014/30/ΕΕ σχετικά με την ηλεκτρομαγνητική συμβατότητα, Οοδηγία χαμηλή τάση 2014/35/EU, Οδηγία 2009/125/ΕΚ σχετικά με τον οικολογικό σχεδιασμό, Οδηγία RoHS 2011/65/ΕΕ και 2015/863.

Η συμμόρφωση με αυτές τις οδηγίες αξιολογείται χρησιμοποιώντας τα ισχύοντα εναρμονισμένα ευρωπαϊκά πρότυπα.

Japan Class 01 Equipment Statement

安全にご使用いただくために

接地接続は必ず電源プラグを電源につなぐ前に行って下さい。

また、接地接続を外す場合は、必ず電源プラグを電源から切り離してから行って下さい。

Japan VCCI Class B Statement

クラスB VCCI 基準について

この装置は、クラスB情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。

取扱説明書に従って正しい取り扱いをして下さい。

VCCI-B

(8)

China RoHS Compliance Statement

中国《废弃电器电子产品回收处理管理条例》提示性说明

为了更好地关爱及保护地球，当用户不再需要此产品或产品寿命终止时，

请遵守国家废弃电器电子产品回收处理相关法律法规，将其交给当地具有国家认可的回收处理资质的厂商进行回收处理。

环保使用期限

Environment-friendly Use Period

此标识指期限（十年），电子电气产品中含有的有害物质不会发生外泄或突变、电子电气产品用户正常使用该电子电气产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限。

ٛ൰፩቏ࣷ႘፣ܿಚڅঽࣽ஢Ļ

ȡ ɐ ɐ ɐ ɐ ɐ

ؠ਋ಚڅ

቏ࣷ႘፣

ල˄őţ˅ ࢢ˄ŉŨ˅ Ლ˄ńť˅ ௜২ࢊ

ĩńųĬķĪ

޹ᢢ஍׀

˄őŃŃ˅

޹ᢢߗ׀౰

˄őŃŅņ˅

ሠ༱ݢ௸֊

ঽඝݢᏊᏠ਋ ȡ ɐ ɐ ɐ ɐ ɐ

ᇛੰಅ֊

ိ૮ ɐ ɐ ɐ ɐ ɐ ɐ

ȡ ɐ ɐ ɐ ɐ ɐ

ိؠᄪखஏ

ਾဂঽღإ

ׁװࢆᇡદġŔŋİŕġĲĲĴķĵġܿࣙށף፟ȃ

ɐĻġġװ໯ࡘ቏ࣷ႘፣኷ࡘؠ਋ྈ቏ૂ፣إல፩ܿࣽ஢ૂ኷ġňŃİŕġĳķĶĸĳġࣙށܿქ஢ᇋชᇵ჉ȃ ȡĻġġװ໯ࡘ቏ࣷ႘፣ፚຬ኷ࡘؠ਋ܿರᇜૂ፣إல፩ܿࣽ஢٫ڵġňŃİŕġĳķĶĸĳġࣙށܿქ஢ᇋชȃ

(9)

◯ ◯ ◯ ◯ ◯ ◯

◯ ◯ ◯ ◯ ◯

◯ ◯ ◯ ◯ ◯ ◯

◯ ◯ ◯ ◯ ◯

╖⃫

Unit

旸䓐䈑岒⍲℞⊾⬠䫎嘇 Restricted substances and its chemical symbols

⟹㕁⢾㟮

⼴㭤㵚㘞朊㜧暣嶗㜧䳬ẞ

⸽⹏

暣㸸䶂

℞Ṿ䶂㛸

⁁侫1.˶崭↢0.1 wt %˷⍲˶崭↢0.01 wt %˷Ὢ㊯旸䓐䈑岒ᷳ䘦↮㭼⏓慷崭↢䘦↮㭼⏓慷➢㸾ῤˤ Note 1;˶Exceeding 0.1 wt %˷ and˶exceeding 0.01 wt %˷indicate that the percentage content of the

restricted substance exceeds the reference percentage value of presence condion.

⁁侫2.˶◯˷Ὢ㊯娚枭旸䓐䈑岒ᷳ䘦↮㭼⏓慷㛒崭↢䘦↮㭼⏓慷➢㸾ῤˤ

Note 2;˶◯˷indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

⁁侫3.˶炼˷Ὢ㊯娚枭旸䓐䈑岒䁢㌺昌枭䚖ˤ

Note 3;The˶炼˷indicates that the restricted substance corresponds to the exempon.

Equipment name Type designaon (Type)

Lead戃 (Pb)

Mercury㰆 (Hg)

Cadmium捀 (Cd)

ℕ₡戣 Hexavalent

chromium (Cr⁺⁶)

⣂㹜倗劗 Polybrominated

biphenyls (PBB)

⣂㹜Ḵ劗慂 Polybrominated diphenyls ethers

(PBDE)

攎䏦䄧宨⋩㗇⾃㭿㣗䟸估㓌㖶

Declaration of the Presence Condition of the Restricted Substances Marking 姕⁁⎵䧙烉㵚㘞栗䣢☐炻✳嘇炷✳⺷炸烉ġġAORUS FV43U

(10)

Safety Precautions

Read through the following Safety Precautions before using the monitor.

• Only use the accessories that are provided with the monitor or that which are recommended by the manufacturer.

• Keep the plastic packaging bag for the product in a place that cannot be reached by children.

• Before connecting the monitor to the power outlet, make sure that the voltage rating of the power cable is compatible with the power specification in the country where you are located.

• The power cord plug must be connected to a properly wired and grounded power outlet.

• Do not touch the plug with wet hands, otherwise easily cause electric shock.

• Place the monitor in a stable and well-ventilated place.

• Do not place the monitor near any heat sources such as electric radiators or direct sunlight.

• The holes or openings on the monitor are for ventilation. Do not cover or block the ventilation holes with any objects.

• Do not use the monitor near water, drinks, or all types of liquids.

Failure to do so may result in electric shock or damage to the monitor.

• Make sure to unplug the monitor from the power outlet before cleaning.

• As the screen surface is easy to be scratched, avoid touching the surface with any hard or sharp object.

• Use a soft lint-free cloth instead of a tissue to wipe the screen. You may use a glass cleaner to clean the monitor if required. However, never spray the cleaner directly onto the screen.

• Disconnect the power cable if the monitor is not being used for a long period of time.

• Do not attempt to disassemble or repair the monitor yourself.

(11)

INTRODUCTION

Unpacking

1. Open the top cover of the upper box.

2. Remove the items from the upper EPS foam.

ANCHDR

(13)

3. Remove the locks securing the upper box to the lower box.

4. Firmly hold both sides of the upper box and lift to remove it from the lower box.

(14)

5. Remove the upper and sides EPS foams.

6. Carefully remove the monitor from the lower box.

Note: We highly recommended to use at least two people to move the monitor.

(15)

Package Contents

The following items come with your packaging box. If any of them is missing, please contact your local dealer.

Monitor Monitor Bases (x2) Remote Control

Power Cable HDMI Cable USB Cable

Multilingual Installation Guide

AORUS FV43U

Warranty Car d

DP Cable Quick Start Guide Warranty Card Note: Please keep the packaging box and packing materials for future transportation of the monitor.

(16)

Product Overview

Front View

1 2

1 Power LED 2 Control button

(17)

Rear View

USB 3.0 HDMI-1 HDMI-2 DP TYPE-C

1 2 4 5 6 7 8

9

3

1 Line-Out port 2 Headphone jack 3 HDMI ports (x2) 4 DisplayPort 5 USB Type-C port

6 USB upstream port 7 USB 3.0 ports (x2) 8 AC IN jack

9 Kensington lock

Note:

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

(18)

Remote Control

1 2

5 8

7 9 6 4 3

1 Power button 2 Input button 3 Enter button

4 Navigation buttons (up/down/left/right)

5 Picture Mode button 6 Mute button

7 Audio Mode button 8 Volume Up button 9 Volume Down button

(19)

GETTING STARTED

Installing the Monitor Base

1. Place the monitor on a table, with the screen facing down.

Note: We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

2. Align and install the monitor bases into the mounting slots on the bottom of the monitor.

3. Secure the monitor bases with the four screws.

(20)

Inserting the Batteries into the Remote Control

1. Open the battery cover.

2. Insert two AAA batteries into the battery compartment. Ensure that the batteries are inserted with the correct polarity.

AAAAAA

3. Replace the battery cover.

(21)

Installing a Wall-Mount Bracket (Optional)

Use only the 200 x 200 mm wall mount kit recommended by the manufacturer.

1. Place the monitor on a table, with the screen facing down.

Note: We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

2. Remove the four screws securing the monitor bases.

3. Remove the monitor bases.

(22)

4. Attach the mounting bracket to the mounting holes at the rear of the monitor. Then use the screws to secure the bracket in place.

200 mm 200 mm

Note: To mount the monitor on the wall, refer to the installation guide that is included in the wall-mount bracket kit. VESA mounting screw size: M6 x 16mm minimum.

(23)

Making Connections

USB 3.0 HDMI-1 HDMI-2 DP TYPE-C

1 2 3 4 5 6 7 8

Keyboard

Mouse & USB disk drive

Computer Headphone

Power outlet

Speaker

(24)

USING THE DEVICE

Turning the Power On/Off

Power On

1. Connect one end of the power cable to the AC IN jack at the rear of the monitor.

2. Connect other end of the the power cable to a power outlet.

3. Press the Control button to turn on the monitor. The Power LED will light in white, indicating the monitor is ready to use.

Note:

• You can also use the button on the remote control to turn on the monitor.

• If the Power LED remains off after you turn on the monitor, please check the LED Indicator setting in the Settings menu. Refer to page 40.

Power Off

Press the Control button for 2 seconds to turn off the monitor.

Note:

• When the Main menu appears on the screen, you can also turn off the monitor by moving the Control button down ( ). Refer to page 29.

• You can also use the button on the remote control to turn off the monitor.

(25)

User Comfort Recommendations

The following are some tips for comfortable viewing of your monitor:

• Optimal viewing distances for monitors range from approximately 510 mm to 760 mm (20 in to 30 in).

• A general guideline is to position the monitor such that the top of the screen is at or slightly below your eye-height when you are comfortably seated.

• Use adequate lighting for the type of work you are performing.

• Take regular and frequent breaks (at least for 10 minutes) every 30 minutes.

• Be sure to periodically look away from your monitor screen and focus on a far object for at least 20 seconds during the breaks.

• Eye exercise can help reduce eye strain. Repeat these exercises frequently: (1) look up and down (2) slowly roll your eye (3) move your eyes diagonally.

(26)

Selecting the Input Source

1. Move the Control button right ( ) to enter the Input menu.

2. Move the Control button up/

down ( ) to select the desired input source. Then press the Control button to confirm.

Note: You can also use the buttons on the remote control to do the folllowing:

√ Use the Navigation/Enter buttons to make the selection.

√ Press the button to directly enter the Input menu.

Select Exit

Input

HDMI 1 HDMI2 DisplayPort

Type-C

(27)

OPERATIONS

Note: You can either use the Control button or the Navigation/Enter buttons on the remote control to navigate through the menu and make adjustments.

Quick Menu

Hot Key

By default, the Control button has been assigned with the specific function.

Note: To change the preset hot key function, refer to the “Quick Switch” section on page 40.

To access the hot key function, do the following:

• Move the Control button up ( ) to enter the Black Equalizer menu.

Move the Control button up/down ( ) to adjust the setting and press the Control button to confirm.

Adjust Exit

Black Equalizer

0

(28)

• Move the Control button down ( ) to enter the Picture Mode menu.

Move the Control button up/down ( ) to select the desired option and press the Control button to confirm.

Note: You can also press the button on the remote control to directly enter the Picture Mode menu.

• Move the Control button left ( ) to enter the Audio Mode menu.

Move the Control button up/down ( ) to select the desired option and press the Control button to confirm.

Note: You can also press the button on the remote control to directly enter the Audio Mode menu.

• Move the Control button right ( ) to enter the the Input menu.

Refer to the “Selecting the Input Source” section.

Note: To close the menu, move the Control button left ( ).

Select Exit

Picture Mode

Standard VS mode

FPS RTS/RPG

Movie Reader

Select Exit

Audio Mode

Standard VS mode

FPS Movie Live Concert

(29)

Function Key Guide

Press the Control button to display the Main menu.

EXIT SETTING

POWER OFF

GAME ASSIST DASHBOARD

Game Assist Settings

Power Off Dashboard

Exit

Then use the Control button to select the desired function and configure the related settings.

Dashboard

When the Main menu appears on the screen, move the Control button left ( ) to enter the Dashboard menu.

Select Exit

Dashboard Function

Dashboard Location

ON

OFF

CPU Temperature CPU Frequency CPU Fan Speed CPU Usage Rate GPU Temperature GPU Frequency GPU Fan Speed

(30)

Once the Dashboard configuration is complete, it will transfer the system data to the SOC through the USB port and display the value of the selected function(s) on the screen.

CPU Temperature CPU Frequency CPU Fan Speed CPU Usage Rate GPU Temperature GPU Frequency GPU Fan Speed GPU Usage Rate AORUS Mouse DPI

Note: Make sure the USB cable is properly connected to the USB upstream port of the monitor and the USB port of your computer.

Game Assist

When the Main menu appears on the screen, move the Control button right ( ) to enter the Game Assist menu.

Select Exit

GameAssist AORUS Info

Display Alignment

Crosshair

Gaming Timer Gaming Counter

Refresh Rate

Info Location

OFF Count Up

Count Down

(31)

• AORUS Info: Configure the FPS (First Person Shooting) game related settings.

√ Select Gaming Timer to select countdown timer mode. To disable this function, set the setting to OFF.

√ Select Gaming Counter or Refresh Rate to enable/disable the gaming counter or real-time refresh rate setting.

√ Select Info Location to specify the location of the information to be shown on the screen.

00:00 00 60

• Crosshair: Select the desired crosshair type to suit your gaming environment. It makes aiming much easier.

• Display Alignment: When the function is enabled, it displays the alignment lines on the four sides of the screen, providing handy tool for you to line up multiple monitors perfectly.

(32)

LCD Monitor User’s Manual

Configure the Device Settings

When the Main menu appears on the screen, move the Control button up ( ) to enter the Settings menu.

Exit

Move/Adjust Enter/Confirm Gaming

Picture Display PIP/PBP System Save Settings Reset all

Aim Stabilizer Sync Black Equalizer Super Resolution Display Mode Display Position Overdrive Adaptive Sync

Picture Mode Standard

0

Button Guide

Gaming

Configure the game related settings.

Exit Move/Adjust Enter/Confirm Gaming

Picture Display PIP/PBP System Save Settings Reset all

Aim Stabilizer Sync Black Equalizer Super Resolution Display Mode Display Position Overdrive Adaptive Sync

Picture Mode Standard Resolution Aim Stabilizer Sync Overdrive Refresh Rate Adaptive Sync

3840x2160 Black Equalizer OFF Balance 60 HZ ON

0

Item Description

Aim Stabilizer

Sync When this function is enabled, it reduces the motion blur in a fast moving games.

Note: This function is not available under the following conditions:

- when the frequency setting is lower than 100Hz.

- when the Adaptive Sync function is activated.

Black

Equalizer Adjust the brightness of the black areas.

(33)

Item Description Super

Resolution Sharpen the low resolution images.

Display Mode Select the aspect ratio of the screen.

• Full: Scale the input image to fill the screen. Ideal for 16:9 aspect images.

• Aspect: Display the input image without

geometric distortion filling as much of the screen as possible.

• 1:1: Display the input image in its native resolution without scaling.

• 22”W (16:10): Display the input image as if on a 22”W monitor of 16:10 aspect ratio.

• 23.6”W (16:9): Display the input image as if on a 23.6”W monitor of 16:9 aspect ratio.

Note: This option is not compatible with Adaptive Sync function.

Display

Position Determine the position of the Display Mode screen.

Overdrive Improve the response time of the LCD monitor.

Adaptive Sync When this function is enabled, it eliminates the screen lag and tearing while playing games.

(34)

Picture

Configure the image related settings.

Gaming Picture Display PIP/PBP System Save Settings Reset all

Standard VS mode FPS RTS/RPG Movie Reader sRGB

SDR Brightness Contrast Sharpness Gamma Color Temp.

85 50 5 0 Normal

Exit Move/Adjust Enter/Confirm Brightness

Contrast Advance Contrast Color

Color Vibrance Sharpness Gamma

85

Select the one of the preset picture mode.

• Standard: For editing documents or browsing websites.

• VS mode: For playing FTG(Fighting) games.

• FPS: For playing FPS (First Person Shooting) games.

• RTS/RPG: For playing RTS (Real-Time Strategy) or RPG (Role-Playing Game) games.

• Movie: For watching movies.

• Reader: For viewing documents.

• sRGB: For viewing photos and graphics on the computer.

• Custom 1: Customized picture mode settings.

• Green: For saving the power consumption of the monitor.

Then you can configure the following image settings.

Brightness Adjust the brightness of the image.

Contrast Adjust the contrast of the image.

Advance

Contrast Adjust the black level of the image to achieve the optimum contrast.

(35)

Color An advanced color adjustment that user can individually customize hue and saturation for each axis color.

Color Vibrance Adjust the intensity of the more muted colors.

Sharpness Adjust the sharpness of the image.

Gamma Adjust the middle level of luminance.

Color Temp. Select the color temperature.

Note: Select User Define to customize the color

temperature by adjusting the red (R), green (G), or blue (B) level according to your preference.

Color Space Select the color space for the monitor color output.

Low Blue Light Reduce the amount of blue light exposure from the screen.

• Level 0: No change.

• Level 1~10: The higher the level, the more blue light will be reduced.

Note: Level 10 is optimized setting. It is compliance with TUV Low Blue Light Certification.

DCR Adjust the black level of the image to achieve the optimum contrast.

Senseye Demo Split the screen in half (2 windows).

The image of the selected mode with its default settings will appear on the left window and the adjusted image with the new settings will appear on the right window.

Local

Dimming Improve the blackness of images displayed on the monitor.

Reset Picture Reset all Picture settings to the default settings.

(36)

Note: The following picture modes will be shown only when HDR function is activated.

HDR 1000 HDR_Game HDR_Movie HDR_HLG

HDR Brightness Contrast Sharpness Gamma Color Temp.

85 50 5 0 Normal

Exit Move/Adjust Enter/Confirm Brightness

Contrast Light Enhance Color Enhance Dark Enhance Local Dimming Reset Picture

85

• Light Enhance: Enhance the Brightness performance.

• Color Enhance: Enhance the Color performance.

• Dark Enhance: Enhance the Darkness performance.

Display

Configure the display screen related settings.

Input KVM HDR

HDMI RGB PC Range Overscan

HDMI 1 HDMI 2 DisplayPort Type-C

Exit Move/Adjust Enter/Confirm

85 50 5 0 Normal

Input Select the input source.

(37)

KVM Configure the KVM related settings.

• KVM Switch: Switch the input source that has been assigned to USB-B or Type-C connection in the KVM Wizard settings.

• KVM Wizard: Set the input source to be bound with USB Type-B connection and USB Type-C connection.

Input KVM HDR

HDMI RGB PC Range Overscan

KVM Switch KVM Wizard KVM Reset

Picture Mode Standard USB-B

Type-C

85 50 5 0 Normal

• KVM Reset: Restore the KVM default settings.

HDR Enable/Disable the HDR function.

Note: This option is only available for HDMI input.

HDMI RGB PC

Range Select an appropriate RGB range setting or let the monitor to detect it automatically.

Overscan When this function is enabled, it slightly enlarges the input image to hide the outermost edges of the image.

(38)

PIP/PBP

Configure the multi-picture related settings.

Exit Move/Adjust Enter/Confirm OFF

PIP PBP

85 50 5 0 Normal

OFF Disable the PIP/PBP function.

PIP Split the screen into 2 parts (main window and inset window).

• Source: Change the input source for the inset window.

• USB Control: Select the control source from USB-B or Type-C.

• PIP Size: Adjust the inset window size.

• Location: Move the inset window position.

• Display Switch: Swap the two windows.

• Audio Switch: Select which audio source you want to hear the sound from.

PBP Display 1x1 split screen (left and right windows).

• Source: Change the input source for the right window.

• USB Control: Select the control source from USB-B or Type-C.

• PBP Size: Adjust the window size.

• Display Switch: Swap the two windows.

• Audio Switch: Select which audio source you want to hear the sound from.

Note: PIP/PBP is not compatible with HDR and Adaptive Sync functions.

(39)

System

Configure the system related settings.

Language RGB LED Audio Audio Mode OSD Settings Quick Switch Other Settings

85 50 5 0 Normal

English 互Ṿ 䯑Ṿ Deutsch Français 㘶㝽嫯 한국어

Language Select an available language for the OSD menu.

RGB LED When this function is enabled, you can select the preset LED color and effect to be displayed on the rear of the monitor.

Audio Configure the audio related settings.

• Volume: Adjust the volume level for 3.5mm jack.

• 600R: For high impedance device (>600 ohm), turn on this option to have better sound quality.

• Mute: Enable/Disable the mute function.

Audio Mode Select the desired audio mode.

OSD Settings Configure the on-screen display (OSD) menu related settings.

• Display Time: Set the length of time the OSD menu remains on the screen.

• OSD Transparency: Adjust the OSD menu transparency.

(40)

Item Description OSD Settings

(continue)

• OSD Lock: When this function is enabled, no OSD adjustment is allowed.

Note: To disable the OSD lock function, press the Control key. When the message appears on the screen, select Yes to confirm.

The button is locked, confirm to unlock OSD.

Yes No

Quick Switch Assign the function of the hot keys.

Available options: Aim Stabilizer, Black Equalizer, Low Blue Light, Volume, Audio Mode, Input, Contrast, Brightness, Picture Mode, and KVM Switch.

The default setting of the hot keys as below:

D Up ( ): Black Equalizer D Down ( ): Picture Mode D Right ( ): Input

D Left ( ): Audio Mode

Note: The Monitor uses low blue light panel and

compliance with TÜV Rheinland Low Blue Light Hardware Solution at factory reset/default setting mode

(Brightness: 40%, Contrast: 50%, CCT: Normal, Preset mode: Standard).

Other Settings • Resolution Notice: When this function is enabled, the recommended resolution message will appear on the screen when the monitor switches to another input source.

• Input Auto Switch: When this function is enabled, it automatically switches to an available input source.

• Auto Power OFF: When this function is enabled, the monitor will automatically turn off after a certain amount of time.

(41)

Item Description Other Settings

(continue)

• LED Indicator: By default, the LED indicator is set to Always ON.

D Always ON: The Power LED lights white during operation and lights orange in standby mode.

D Always OFF: Turn off the Power LED.

D Standby ON: The Power LED lights orange in standby mode.

D When the power supply is switched off, the Power LED will remain off.

(42)

Save Settings

Set the personalized OSD configurations for Setting1, Setting2, or Setting3.

Setting1 Setting2 Setting3

Save Load

85 50 5 0 Normal

Save Save the customized settings.

Load Load the saved settings.

Reset all

Restore the monitor to its factory default settings.

85 50 5 0 Normal

(43)

APPENDICES

Specifications

Item Specifications

Panel Size 43-inch

Aspect Ratio 16:9

Resolution 3840 x 2160 LED Life 30000 hours

Pixel Pitch 0.2451(H) x 0.2451(V) Brightness 750 nits (typ.)

Contrast Ratio 4000:1 Dynamic Contrast

Ratio 12M:1

Color Depth 1.07B

Active Display area 941.18(H) x 529.42(V) Viewing Angle 178°(H) / 178°(V)

Frequency 144Hz

Input/Output

Terminals • 2x HDMI 2.1

• 1x DP1.4

• 1x Headphone

• 1x Line-Out

• 1x USB upstream

• 2x USB 3.0 (downstream), support BC 1.2 charging (5V/1.5A)

• 1x USB Type-C (5V/3A, 9V/2A, 12V/1.5A, 15V/1A) Power Supply 100 to 240Vac at 50/60Hz

Power

Consumptions • On: 240W (max.)

• Standby: 0.5W

(44)

Item Specifications Temperature Range

(operation) 0°C to 40°C

Note: Specifications subject to change without notice.

Supported Timing List

Timing List HDMI DisplayPort/

USB Type-C

640x480@60Hz √ √

640x480@75Hz √ √

720x480@60Hz √ √

720x576P@50Hz √ √

800x600@60Hz √ √

800x600@75Hz √ √

1024x768@60Hz √ √

1024x768@75Hz √ √

1280x720@60Hz √ √

1280x720@100Hz √ √

1280x720@120Hz √ √

1920x1080@60Hz √ √

1920x1080@120Hz √ √

1920x1080@144Hz √ X

1920x1080@165Hz X √

2560x1440@60Hz √ √

2560x1440@120Hz √ √

2560x1440@144Hz √ √

3840x2160@60Hz √ √

3840x2160@120Hz √ √

3840x2160@144Hz √ √

(45)

Troubleshooting

Problem Possible Solution(s)

No power • Make sure the power cable is properly connected to the power source and the monitor.

• Check the cable and plug to make sure they are not broken.

• Make sure the monitor is turned on.

No image appears

on the screen • Make sure the monitor and the computer are properly connected and both devices are turned on.

• Make sure you have selected the correct input source. Refer to page 26 or 36.

• Adjust the Brightness and Contrast settings.

Refer to page 34.

The image does not fill the entire screen

• Try different Display Mode (aspect ratio) setting. Refer to page 33.

The colors are

distorted • Make sure the input signal cable is properly connected.

• Configure the image related settings. Refer to the “Picture” section.

No sound or

volume is low • Make sure the headphone cable is properly connected.

• Adjust the volume level. Refer to page 39.

• Adjust your computer sound related settings.

Note: If the problem persists, please contact our customer service for further assistance.

(46)

Basic Care

When the screen becomes dirty, do the following to clean the screen:

• Wipe the screen with your soft, lint-free cloth to remove any residual dust.

• Spray or apply the cleaning fluid onto a soft cloth. Then wipe the screen gently with the damp cloth.

Note:

• Make sure that the cloth is damp, but not wet.

• When wiping, avoid applying excessive pressure on the screen.

• Acidic or abrasive cleaners can damage the screen.

Notes on USB Charging

The following devices are not compatible with BC 1.2 of CDP mode.

When the Hub is connected to a PC, these devices cannot be charged using the USB cable.

Vendor Device PID/VID

Apple IPad PID_129A/VID_05AC

Samsung Galaxy Tab2 10.1 PID_6860/VID_04E8

Samsung GALAXY TabPro PID_6860/VID_04E8

GIGABYTE Service Information

More service information, please visit GIGABYTE official website:

https://www.gigabyte.com/

SAFETY INFORMATION

TACTICAL

Copyright

Disclaimer

SAFETY INFORMATION

Regulatory Notices

United States of America, Federal Communications Commission Statement

Canadian Department of Communications Statement

European Union (EU) CE Declaration of Conformity

European Union (EU) RoHS (recast) Directive 2011/65/EU &

the European Commission Delegated Directive (EU) 2015/863 Statement

European Union (EU) Community Waste Electrical & Electronic Equipment (WEEE) Directive Statement

WEEE Symbol Statement

End of Life Directives-Recycling

Déclaration de Conformité aux Directives de l’Union européenne (UE)

European Union (EU) CE-Konformitätserklärung

CE declaração de conformidade

CE Declaración de conformidad

CE Dichiarazione di conformità

Deklaracja zgodności UE Unii Europejskiej

ES Prohlášení o shodě

EK megfelelőségi nyilatkozata

Δήλωση συμμόρφωσης ΕΕ

Japan Class 01 Equipment Statement

Japan VCCI Class B Statement

China RoHS Compliance Statement

攎䏦䄧宨⋩㗇⾃㭿㣗䟸估㓌㖶

Safety Precautions

CONTENTS

INTRODUCTION

Unpacking

Package Contents

Product Overview

Front View

Rear View

Remote Control

GETTING STARTED

Installing the Monitor Base

Inserting the Batteries into the Remote Control

Installing a Wall-Mount Bracket (Optional)

Making Connections

USING THE DEVICE

Turning the Power On/Off

Power On

Power Off

User Comfort Recommendations

Selecting the Input Source

OPERATIONS

Quick Menu

Hot Key

Function Key Guide

Dashboard

Game Assist

Configure the Device Settings

Gaming

Picture

Display

PIP/PBP

System

Save Settings

Reset all

APPENDICES

Specifications

Supported Timing List

Troubleshooting

Basic Care

Notes on USB Charging

GIGABYTE Service Information