[4] V. Agrawal, W. Imbriale, “Design of a dichroic Cassegrain subreflector”, IEEE Transaction on Antennas and Propagation Volume:27, Issue:4 pp:466-473 July 1979.

BIBLIOGRAFIA

[1] B. A. Munk, “Frequency Selective Surfaces – Theory and Design”, John Wiley & Sons, New York, 2000.

[2] D. Rittenhouse, “An optical problem, proposed by Mr. Hopkinson, and solved by Mr. Rittenhouse”, Trans. Amer. Phil. SOC., vol. 2, pp. 201-206, 1786.

[3] G. Marconi and C.S. Franklin, ''Reflector for use in wireless telegraphy and telephony'', US Patent 1,301,473, April 1919.

[4] V. Agrawal, W. Imbriale, “Design of a dichroic Cassegrain subreflector”, IEEE Transaction on Antennas and Propagation Volume:27, Issue:4 pp:466-473 July 1979.

[5] T. K. Wu, “Cassini Frequency Selective Subreflector Development”, NASA Jet Propulsion Laboratory, January 1, 1994.

[6] T. K. Wu, “Four-Band Frequency Selective Surface with Double-Square-Loop Patch Elements”, IEEE Transaction on Antennas and Propagation, Vol. 42, No. 12, December, 1994

[7] F. Costa, A. Monorchio, G. Manara, “On the Derivation of an Equivalent Circuit Model of Frequency Selective Surfaces Embedded within Dielectric Layers”, submitted to IEEE Antennas and Propagation Magazine.

[8] F. Costa, A. Monorchio and G. Manara, “An Equivalent Circuit Model of Frequency Selective Surfaces Embedded within Dielectric Layers”, Proc. IEEE Antennas and Propagation Society International Symposium, Charleston, SC, June 2009.

[9] W. Yu, S. Dey, and R. Mittra, “Modeling of Periodic Structures Using the Finite Difference Time Domain (FDTD)”, IEEE APS/URSI Symp. 1999 Digest, pp. 594-597, July 1999.

[10] M. Lambea, M. A. Gonzalez, J. A. Encinar, and J. Zapata, “Analysis of Frequency Selective Surfaces with Arbitrarily Shaped Apertures by Finite Element Method and Generalized Scattering Matrix,” IEEE APS International Symposium 1995 Digest, Vol.3, pp. 1644-1647, 1995.

[11] G. Manara, A. Monorchio, A. Talarico and R. Mittra, "Design of a Dichroic Surface forDual-Frequency Radioastronomical Observations", Microwave and Opt. Techn.

Lett., vol. 20, no. 2, p. 126:129, Jan. 20 1999.

[12] G. R. Schmier, E. W. Lucas, J. A. Bingham, “Frequency selective radome”, US Patent No. 740348, August 18, 1992

[13] A.P. Feresidis, G. Goussetis, S. Wang and J.C. Vardaxoglou, “Artificial Magnetic Conductor Surfaces and Their Application to Low-Profile High-Gain Planar Antennas”, IEEE Transactions on Antennas Propagation, Vol. 53 No. 1, pp. 209-215, January 2005.

[14] R. Sauleau, “Fabry-Perot Resonators”, Encyclopedia of RF and Microwave

Engineering, Vol. 2, pp. 1381-1401, Edited by Chang, Kai, 2005 John Wiley & Sons.

[15] S. Wang, A.P. Feresidis, G. Goussetis and J.C. Vardaxoglou, “High-gain subwavelength resonant cavity antennas based on metamaterial ground planes”, IEEE Proc.-Microw.

Antennas Propag., Vol. 153, No. 1, February 2006

[16] J. R. Kelly, T. Kokkinos, A. P. Feresidis, “Analysis and Design of Sub-Wavelength Resonant Cavity Type 2-D Leaky-Wave Antennas”, IEEE Transactions on Antennas Propagation, Vol. 56, No. 9, pp. 2815-2825, September 2008

[17] D. Sievenpiper, “High-Impedance Electromagnetic Surfaces”, PhD. Dissertation, University of California, Los Angeles, 1999.

[18] B. Munk, P. Munk, J. Prior, “On Designing Jaumann and Circuit Analog Absorbers (CA Absorbers) for Oblique Angle of Incidence”, IEEE Transaction on Antennas and Propagation, Vol. 55, No. 1, January 2007.

[19] Daniel F. Sievenpiper,, James H. Schaffner, H. Jae Song Robert Y. Loo and Gregory Tangonan, “Two-Dimensional Beam Steering Using an Electrically Tunable Impedance Surface”, IEEE Trans. Antennas Propag., Vol. 51, No. 10, Oct. 2003.

[20] H. Kazemi, J. A. Higgins, B. Herting, X. Hao, J. West, J. Hacker, “Electromagnetic bandgap waveguide (EBG) phase shifters for low cost electronically scanned antennas (ESA)”, Proc. IEEE AP-S/URSI Symposium, Dig. 2007, pp.4357-4360.

[21] D. Sievenpiper, L. Zhang, R. F. J. Broas, N. G. Alexopolous, and E. Yablonovitch,

“High-impedance electromagnetic surfaces with a forbidden frequency band”, IEEE Trans. Microw. Theory Tech., Vol. 47, No. 11, pp. 2059–2074, Nov. 1999

[22] Kern, D.J. Werner, D.H. Monorchio, A. Lanuzza, L. Wilhelm, M.J., “The design synthesis of multiband artificial magnetic conductors using high impedance frequencyselective surfaces”, IEEE Transaction on Antennas and Propagation, Volume 53, Issue 1, Part 1, Jan. 2005 Page(s): 8 – 17

[23] R. L. Fante, and M.T. McCormack, “Reflection Properties of the Salisbury Screen”, IEEE Transaction on Antennas and Propagation, Vol. 36, Issue 10, Oct. 1988, pp. 1443- 1454.

[24] Q. Gao, Y. Yin, D. B. Yan, and N. C. Yuan, “A Novel Radar-Absorbing-Material Based on EBG Structure”, IEEE Microw. and Opt. Technology Letters, vol.47, no. 3, Nov. 5 2005.

[25] F. Costa, A. Monorchio, G. Manara, “Analysis and Design of Ultra Thin Electromagnetic Absorbers Comprising Resistively Loaded High Impedance Surfaces”, IEEE Transactions on Antennas and Propag., vol. 58, no. 5, 2010.

[26] F. Terracher, G. Berginc, “Thin electromagnetic absorber using frequency selective surfaces”, IEEE Antennas and Propagation Society International Symposium, 2000 Volume 2, 16-21 pp.846 – 849, July 2000.

[27] F. Costa, A. Monorchio, “A Multiband Electromagnetic Wave Absorber based on Reactive Impedance Ground Planes” to appear in IET Microwave Antennas &

Propagation.

[28] A. Tennant, and B. Chambers, “A Single-Layer Tuneable Microwave Absorber Using

an Active FSS”,IEEE Microwave and Wireless Components Letters, Vol. 14, No. 1,

January 2004.

[29] F. Costa, S. Genovesi, A. Monorchio, “On the Bandwidth of High-Impedance Frequency Selective Surfaces” IEEE Antennas Wireless & Propagation Letters, vol. 8, pp. 1341-1344, 2009.

[30] O. Luukkonen, C. Simovski, G. Granet, G. Goussetis, “Simple and Accurate Analytical Model of Planar Grids and High-Impedance Surfaces Comprising Metal Strips or Patches” IEEE Transaction on Antennas and Propagation, Vol. 56, No. 6, pp. 1624- 1632, June 2008

[31] C. Mias, J. H. Yap, “A Varactor Tunable High Impedance Surface With a Resistive Lumped Element Biasing Grid”, IEEE Transaction on Antennas and Propagation, vol.

55, no. 7, pp. 1955–1962, 2007.

[32] A. Monorchio, G. Manara, U. Serra, G. Marola, E. Pagana, “Design of Waveguide Filters by Using Genetically Optimized Frequency Selective Surfaces”, IEEE Microwave and Wireless Components Letters, vol. 15, no. 6, pp.407-409, June 2005 [33] C. Amabile, F. Costa, A. Monorchio, E. Prati, “Analysis and Design of Coupled

Frequency Selective Surfaces as a Novel Kind of Waveguide Filter” Metamaterials ‘07 International Congress, Rome, Italy, October 22-26, 2007.

[34] C. Mias, “Varactor-tunable frequency selective surface with resistive lumped-element biasing grids”, IEEE Microw.Wireless Compon. Lett., vol. 15, pp. 570–572, Sep. 2005.

[35] F. Costa, A. Monorchio, S. Talarico, F. M. Valeri, “An Active High Impedance Surface for Low Profile Tunable and Steerable Antennas”, IEEE Antennas and Wireless Propagation Letters, vol.7, pp. 676-680, 2008.

[36] F.Costa, “Design of Subwavelength Tunable and Steerable Fabry-Perot Antennas”, 16th International Student Seminar Microwave and Optical applications of novel phenomena, Oulu, Finland, June 8-10, 2009.

[37] A. P. Feresidis and J. C. Vardaxoglou, “High gain planar antenna using optimised partially reflective surfaces”, Proc. Inst. Elect. Eng. Micow. Antennas Propag., vol. 148, No. 6, pp. 345–350, Dec. 2001.

[38] G. Manara, A. Monorchio, P. Nepa “Appunti di Campi Elettromagnetici”, Università degli Studi di Pisa, SEU.

[39] D. M. Pozar, “Microwave Engineering Second Edition”, John Wiley & Sons.

[40] A. Monorchio, Appunti di Compatibilità Elettromagnetica, reperibili al sito www.ing.unipi.it/homepages/agostino.monorchio.

[41] C. A. Balanis, “Antenna Theory - Analysis and Design”, 2° Ed. (John Wiley &

Sons, 1997).

[42] A. Diligenti, “Dispositivi e tecnologie Elettroniche”, Università degli Studi di Pisa, SEU.

[43] R. Janaswamy and S. Wu Lee, “Scattering from dipoles loaded with diodes”, IEEE transaction on antennas and propagation, vol. 36, No. 11, Novembre 1988.

[44] T.K. Chang, R.J. Langley, and E. A. Parker, “Frequency selective surfaces on biased ferrite substrates,” IEEE Elettron. Lett., vol.30, no. 15, pp. 1193-1194, July 1994.

[45] G. Y. Li, Y. C. Chan, T. S. Mok, and J. C. Vardaxoglu, “Analysis of frequency selective

[46] Y. Liu, C. G. Christodoulu, P. F. Wahid, and N. E. Buris, “Analysis of frequency selective surfaces on biased ferrite substrate”, IEEE AP-S Dig., vol.3, June 1995, pp.

18-23.

[47] Y. C. Chan, G. Y. Li , T. S. Mok, and J. C. Vardaxoglu, “Analysis of a tunable frequency-selective surface on an in-plane biased ferrite substrate”, Microwave Opt.

Technol. Lett., vol. 13, no. 2, pp. 59-63, Oct. 1996.

[48] Y. Liu, C. G. Christodoulu, and N. E. Buris, “Full wave analysis method for frequency selective surfaces on ferrite substrates”, J. Electromagn. Waves Apllicat., vol. 11, no. 5, pp. 593-607, 1997.

[49] E. A. Parker and S. B. Savia, “Active frequency selective surfaces with ferroelectric substrates”, Proc. Ist. Elect. Eng. Microwaves, Antennas and Propag., vol.148, Apr.

2001, pp. 103-108.

[50] A. C. de C. Lima, E. A. Parker, and R. J. Langley, "Tunable frequency selective surface using liquid substrates", IEE Electron. Lett., vol. 30, no. 4, pp. 281-282, Feb. 1994.

[51] J. C. Vardaxoglou, "Optical switching of frequency selective surface bandpass response", IEEE Electron. Lett., vol. 32, no. 25, pp. 2345-2346, Dec. 1996.

[52] T. Anderson, I. Alexeff, and J. Raynolds, "Plasma frequency selective surfaces", in Proc.

IEEE Int. Conf. Plasma Science, June 2003, p. 237.

[53] D. S. Lockyer and J. C. Vardaxoglou, "Reconfigurable FSS response from two layers of slotted dipole arrays", IEE Electron. Lett., vol. 32, no. 6, pp. 512-513, MarH 996.

[54] D. Lockyer, R. Seager, and J. C. Vardaxoglou, "Reconfigurable FSS using multilayer conducting_and slotted array structures", in IEEE Colloquium on Advances in Electromagnetic Screens, Radomes, and Materials, Oct. 1996, pp. 6/1-6/4. Digest 270.

[55] J

P. Gianvittorio, J. Zendejas, Y. Rahmat-Samii, and J. Judy, "Reconfigurable MEMS- enabled frequency selective surfaces", IEE Electron. Lett, vol.38, no. 25, pp. 1627-1628 Dec. 2002.

[56] C. Mias, "Frequency selective surfaces loaded with surface-mount reactive components", IEEE Electron. Lett., vol. 39, no. 9, May 2003.

[57] T. K. Chang, R. J. Langley, and E. Parker, "An active square loop frequency selective surface", IEEE Microwave Guided Wave Lett., vol. 3, no. 10, pp. 387-388, Oct. 1993.

[58] T. K. Chang, R. J. Langley, and E. A. Parker, "Active frequency-selective surfaces", in Proc.

IEEE Microwaves, Antennas Propag., vol. 143, Feb. 1996, pp. 62-66.

[59] B. Philips, E. A. Parker, and R. J. Langley, "Active FSS in an experimental horn antenna switchable between two beamwidths", IEEE Electron. Lett., vol. 31, no. 1, pp. 1-2, Jan.

1995.

[60] A. Tennant, and B., Chambers, “Experimental single-layer reactive PSS using reactive impedance switching”, IEEE Electron. Lett., vol. 9, no. 1, pp. 121-122, 2003.

[61] P. N. Kaleeba, A. Tennant, and B. Chambers and J. P. Ide, “Electromagnetic analysis of active radar absorbers”, IEEE Electron. Lett., 2003.

[62] A. Tennant, and B. Chambers, “A Single-Layer Tuneable Microwave Absorber Using

an Active FSS”, IEEE Microwave and Wireless Components Letters, Vol. 14, No. 1,

January 2004.

[63] J. A. Bossard, D. H. Werner, T. S. Mayer, R. P. Drupp, “A novel design methodology

for reconfigurable frequency selective surfaces using genetic algorithms”, IEEE

Transaction on Antennas and Propagation, Vol.53, No.4, April 2005.