Bibliografia
[1] J. D. Achenbach, “Wave Propagation in Elastic Solids”, third edition, North Holland , New York, 1980.
[2] J. D. Achenbach, “Lamb waves as thickness vibrations superimposed on a membrane carrier wave”, J. Acoust. Soc. Am., 103 (5), May 1998.
[3] J.D. Achenbach, “Explicit solution for carrier waves supporting surface waves and plate waves”, Wave Motion, 28, 89-97, 1998.
[4] E. L. Adler, “Electromechanical Coupling to Lamb and Shear-Horizontal Modes in Piezoelectric Plates”, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 36 (2), 223-230, 1989.
[5] R.C. Batra and S. Vidoli, “Derivation of plate and rod equations for a piezoelectric body from a mixed three-dimensional variational principle”, J. Elasticity, 59, 23-50, 2000.
[6] R.C. Batra, S. Vidoli, “A higher order piezoelectric plate theory derived from a three- dimensional variational principle”, AIAA J., accepted.
[7] P. Bisegna, G. Caruso, “Evaluation of higher-order theories of piezoelectric plates in bending and in stretching”Int. J. Solids Structures, 38, 8805-8830, 2001.
[8] P. Bisegna, F. Maceri, “An exact three-dimensional solution for simply supported rectangular piezoelectric plates”, Transactions of the ASME, 63, 628-638, 1996.
[9] P. Bisegna, E. Sacco, “A rational deduction of plate theories from the three-dimensional linear elasticity” Z. angew. Math. Mech., 77 (5), 349-366, 1997.
[10] J.L. Bleustein, H.F. Tiersten, “Forced thickness-shear vibrations of discontinuously plated piezoelectric plates”, J. Acoust. Soc. Am., 43 (6), 1311-1318, 1967.
[11] A. Bostrom, G. Johansson, P. Olsson, “On the rational derivation of a hierarchy of dynamics equations for a homogeneous, isotropic, elastic plate”, Int. J. Solids Structure, 38, 2487-2501, 2001.
[12] S. Carillo, P. Podio-Guidugli, and G. Vergara Caffarelli, “Energy estimates in hierarchical plate theories”, J. Math. Anal. Appl., 248, 216-232, 2000.
139
[13] G. Caruso, “Laminati piezoelettrici: modellazione, algoritmi di calcolo ed ottimiz- zazione della risposta dinamica”, Tesi di Dottorato, Universit`a degli Studi di Roma
“Tor Vergata”, Dipartimento di Ingegneria Civile, 2001.
[14] M. Conry, M.D. Gilchrist, L.J. Crane, “Detection of defects in thin plates using ul- trasonic Lamb waves”, Symposium on Trends in the Applications of Mathematics to Mechanics 2000, Editors O’Donoghue, P. E. and Flavin, J. N., Elsevier 2000.
[15] L.J. Crane, M.D. Gilchrist, J.J.H. Miller, “Analysis of Rayleigh-Lamb wave scattering by a crack in an elastic plate”, Computational Mechanics, 19, 533-537, 1997.
[16] F. Dav`ı “A mixed variational approach to dynamics of linear piezoelectric rods and plates”, Submitted, 2000.
[17] G. Del Piero, P. Podio-Guidugli, “Seminari in elasticit`a lineare”, Serie Quaderni, C.N.R., Gruppo Nazionale per la Fisica Matematica, 1976.
[18] A. DiCarlo, P. Podio-Guidugli, W.O. Williams, “Shells with thickness distension”, Int.
J. Solids Struct., 38 (6/7), 1201-1225, 2001.
[19] A. Dragone, E. Viola, “Sull’identificazione dinamica delle costanti elastiche di una piastra di materiale ortotropo”, Atti del....
[20] M.E. Gurtin, “The Linear Theory of Elasticity”, Handbuch der Physics VI/a, Springer, 1972.
[21] M.E. Gurtin, “An Introduction to Continuum Mechanics”, Academic Press, 1981.
[22] Ishizaki, Sekimoto, Watanabe, “Three-dimensional analysis of spurious vibrations in rectangular AT-cut quartz plate”, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 1996.
[23] G. Jemielita, “On kinematical assumption of refined theories of plates: a survey”, Transaction of the ASME, 57, 1088-1091, 1990.
[24] S.G. Joshi, Y. Jin, “Propagation of ultrasonic Lamb waves in piezoelectric plates”, J.
Appl. Phys., 70 (8), 4113-4120, 1991.
[25] T. R. Kane, R. D. Mindlin, “High-Frequency Extensional Vibrations of Plates”, J. of Applied Mechanics, june, 1956.
[26] G. Kirchhoff, “Uber das Gleichgewicht und die Bewegung einer elastichen Scheibe”, J.
reine angew. Math., 40, 51 (Ges. Abh., 237), 1850.
[27] G. Krall, “Meccanica tecnica delle vibrazioni”, Parte Seconda, Sistemi Continui, Eredi Virgilio Veschi, Roma.
[28] H. Lamb, “Waves in an elastic plate”, Proc. R. Soc. London, Ser. A 93, 114-128, 1917.
[29] G. Lancioni, G. Tomassetti, “Flexure waves in electroelastic plates”, Wave motion, 35, 257-269, 2002.
[30] P.C.Y. Lee, X. Gou, M.S.H. Tang, “Coupled and energy-trapped thickness vibrations in piezoelectric crystal plates”, J. Appl. Phys., 63 (6), 1850-1856, 1988.
[31] P.C.Y. Lee, R. Huang, “Mechanical affects of electrodes on the vibrations of quartz crystal plates” IEEE/EIA International Frequency Control Symposium and Exhibition, 2000.
[32] P.C.Y. Lee, S. Syngellakis, and J. P. Hou, “A two-dimensional theory for high-frequency vibrations of piezoelectric cristal plates with or without electrodes”, J. Appl. Phys., 61 (4), 1249-1262, 1987.
[33] P.C.Y. Lee, J. Wang, “Thickness-shear and flexural vibration of contoured crystal strip resonators”, J. Appl. Phys., 1996.
[34] P.C.Y. Lee, J. Wang, “Piezoelectrically forced thickness-shear and flexural vibrations of contoured quartz resonators”, J. Appl. Phys., 79 (7), 3411-3422, 1996.
[35] P.C.Y. Lee, J.D. Yu, and W. S. Lin, “A new two-dimensional theory for vibrations of piezoelectric crystal plates with electroded faces”, J. Appl. Phys, 83 (3), 1213-1223, 1998.
[36] M. Lembo, P. Podio-Guidugli, “Plate theory as an exact consequence of three-dimensional linear elasticity”, European J. Mech., A/Solids, 10, 1-32, 1991.
[37] M. Levinson, “The simply supported rectangular plate: An exact, threedimensional, linear elasticity solution”, J. Elasticity, 7, 283-291, 1985.
[38] S.G. Lekhnitskii, “Anisotropic plates”, Gordon and Breach Science Publishers, New York, 1987.
[39] K. H. Lo, R. M. Christensen, E. M. Wu “A High-Order Theory of Plate Deformation”, J. Appl. Mechanics, december, 1977.
[40] K. H. Lo, R. M. Christensen, E. M. Wu, “Stress solution determination for high order plate theory”, Int. J. Solids Structure, 14, 655-662, 1978.
[41] N. A. Losin “Asymptotics of flexural waves in isotropic elastic plates”, Transactions of the ASME, 64, 336-342, 1997.
[42] A. E. H. Love, “A Treatise on the Mathematical Theory of Elasticity”, 4th edn.
Cambridge University Press, 1927 (Dover Publications Edition, 1944).
[43] J. Miklowitz, “The theory of elastic waves and waveguides” North Holland Publishing Company, 1978.
[44] R.D. Mindlin, “Thickness-Shear and Flexural Vibrations of Cristal Plates”, J. of Applied Physics, 22 (3), march, 1951.
[45] R.D. Mindlin, “Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates” J. Appl. Mech., 31-38, 1951.
[46] R.D. Mindlin, “Forced thickness-shear and flexural vibrations of piezoelectric crystal plates”, J. Appl. Phys., 23 (1), 83-88, 1952.
[47] R.D. Mindlin, “Thickness-shear and flexural vibrations of partially plated, crystal plates”, Int. J. Solids Structures, 2, 125-139, 1966.
[48] R.D. Mindlin, “High frequency vibrations of piezoelectric crystal plates”, Int. J. Solids Structure, 8, 895-906, 1972.
[49] R.D. Mindlin, “Third overtone quartz resonator”, J. Solids Structures, 18 (9), 809-817, 1982.
[50] R.D. Mindlin, “Frequencies of piezoelectrically forced vibrations of electroded, doubly rotated, quartz plates”, Int. J. Solids Structure, 20 (2), 141-157, 1984.
[51] R.D. Mindlin, M. Forray, “Thickness-shear and flexural vibrations of contoured crystal plate”, J. Appl. Phys., 25 (1), 12-20, 1954.
[52] R.D. Mindlin, M. A. Medick, “Extensional Vibrations of Elastic Plates”, J. of Applied Mechanics, december, 1959.
[53] P. Muller, M. Touratier, “On the so-called variational consistency of plate models, I.
Indefinite plates: evaluation of dispersive behaviour”, J. of Sound and Vibration, 188 (4), 515-527, 1995.
[54] P. Nardinocchi, P. Podio-Guidugli, “The equation of Reissner-Mindlin plates obtained by the method of internal constraints”, Meccanica, 29, 143-157, 1994.
[55] P. Nardinocchi, P. Podio-Guidugli, “Angle Plates” J. of Elasticity, 63, 19-53, 2001.
[56] V. Nicotra, “Piastre elettroelastiche capaci di vibrazione di spessore”, Tesi di Dottorato, Universit`a degli Studi di Roma “Tor Vergata”, Dipartimento di Ingegneria Civile, 1998.
[57] V. Nicotra, P. Podio-Guidugli, “Piezoelectric plates with changing thickness”, J. Struct.
Control, 5 (2), 73-86, 1998.
[58] V. Nicotra, P. Podio-Guidugli, A. Tiero, “Exact equilibrium solutions for linearly elastic plate-like bodies”, J. Elasticity, 56, 231-245, 1999.
[59] Z. Nikodem, P. C. Y. Lee, “Approximate theory of vibration of crystal plates at high frequency”, J. Solids Structures, 10, 177-196, 1974.
[60] E. Pan, “An exact solution for transversely isotropic, simply supported and layered rectangular plates”, J. of Elasticity, 25, 101-116, 1991.
[61] R. C. Peach, “A normal mode expansion for piezoelectric plates and certain of its applications”, IEEE Trensactions on Ultrasonics, ferroelectrics, and Frequency Control, 35 (5), (1988).
[62] P. Podio-Guidugli, “An exact derivation of the thin plate equation”, J. of Elasticity, 22, 121-133, 1989.
[63] P. Podio-Guidugli, “Lezioni sulla teoria lineare dei gusci elastici sottili”, MASSON, Milano, 1991.
[64] P. Podio-Guidugli, “A Primer in Elasticity”, Kluwer, 2000.
[65] P. Podio-Guidugli, “Recent results in the theory of elastic plates”, Transport. Theor.
Stat., 29 (1-2), 217-224, 2000.
[66] P. Podio-Guidugli, G. Tomassetti “Thickness waves in electroelastic plates”, Wave motion, 34, 175-191, 2001.
[67] P. Podio-Guidugli, M. Vianello, “The representation problem of constrained linear elasticity”, J. of Elasticity, 28, 271-276, 1992.
[68] E. Reissner, “On bending of elastic plates” Q. Appl. Math., 5, 55-69, 1945.
[69] E. Reissner, “On the theory of transverse bending of elastic plates” Int. J. Solids Structures, 12, 545-554, 1946.
[70] A.G. Rogerson, L.Y. Kossovitch, “Approximation of the dispersion relation for an elastic plate composed of strongly anisotropic elastic material”, J. Sound Vib., 225 (2), 283-305, 1999.
[71] Sekimoto, Tajima, Watanabe, Ishizaki, “Lee’s plate equations with new correction fac- tors and analysis of spurious vibrations of rectangular AT-cut quartz plates”, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 1995.
[72] N. Stephen, “Mindlin plate theory: best shear coefficient and higer spectra validity”, J. of Sound and Vibration, 202 (4), 539-553, 1997.
[73] Sun, Mao, Jiang, Zhang, “Influence of electrical boundary conditions on Lamb wave propagation in piezoelectric plates”, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 1998.
[74] S. Syngellakis, P.C.Y. Lee, “Piezoelectric wave dispersion curves for infinite anisotropic plates”, J. Appl. Phys., 73 (11), 1993.
[75] L. Teresi, A. Tiero, “On variational approaches to plate models”, Meccanica, 32, 143- 156, 1997.
[76] S. Thimoshenko, S. Woinowsky-Krieger, “Theory of plates and shells”, McGraw-Hill, New York, 1982.
[77] H.F. Tiersten, “Linear piezoelectric plate vibration”, Plenum Press, New York, 1969.
[78] C. Trusdell, “Sophie Germain: fame earned by stubborn error”, Bollettino di Storia delle Scienze Matematiche, 11, 3-24.
[79] C. Trusdell, W. Noll, “The Nonlinear Field Theory of Mechanics”, Handbuch der Physik, Vol. III/3, S.Flugge, Springer-Verlag, 1965.
[80] J. Wang, J. Yang, “Higher-order theories of piezoelectric plates and applications”, Appl.
Mech. Rev., 53 (4), 2000.
[81] J.S. Yang, S. Krishnaswamy, “An approximate analysis of thickness-stretch waves in an elastic plate”, Wave Motion, 30, 291-301, 1999.
[82] Y-K Yong, Z. Zhang, J. Hou, “On the accuracy of plate theories for the prediction of unwanted modes near the fundamental thickness shear mode” IEEE International Frequency Control Symposium, 1995.
[83] J.D. Yu, “Second-order analysis of free vibrations of piezoelectric ceramic actuators”, IEEE International Frequency Control Symposium, 695-702, 1998.
