• Non ci sono risultati.

Estrapolazione della curva tensione-deformazione da prove di indentazione strumentata.


Academic year: 2021

Condividi "Estrapolazione della curva tensione-deformazione da prove di indentazione strumentata."


Testo completo


[1] JM Antunes et al. “A new approach for reverse analyses in depth-sensing indentation using numerical simulation”. In: Acta Materialia 55.1 (2007), pp. 69–81.

[2] RW Armstrong et al. “The science of hardness testing and its re-search applications”. In: American Society for Metals, Metals Park, Ohio (1973), p. 175.

[3] P Au et al. “Flow property measurements from instrumented hardness tests”. In: Non-destructive evaluation in the nuclear industry (1980), pp. 597–610.

[4] M Beghini, L Bertini e V Fontanari. “Evaluation of the flow cur-ve of metallic materials by means of spherical indentation”. In: WIT Transactions on Engineering Sciences 32 (2001).

[5] M Beghini, L Bertini e V Fontanari. “Mechanical characterization of metallic materials by instrumented spherical indentation”. In: Procee-dings of SEM Annual Conference & Exposition on Experimental & Applied Mechanics. 2009, pp. 1–10.

[6] M Beghini et al. “Numerical analysis of plastic deformation evolu-tion into metallic materials during spherical indentaevolu-tion process”. In: Journal of Materials Research 24.03 (2009), pp. 1270–1278.

[7] Joseph-Fr´ed´eric Bonnans et al. Numerical optimization: theoretical and practical aspects. Springer Science & Business Media, 2006.


[8] Jean-Luc Bucaille et al. “Determination of plastic properties of metals by instrumented indentation using different sharp indenters”. In: Acta materialia 51.6 (2003), pp. 1663–1678.

[9] Yan Ping Cao e Jian Lu. “A new method to extract the plastic pro-perties of metal materials from an instrumented spherical indentation loading curve”. In: Acta materialia 52.13 (2004), pp. 4023–4032. [10] Yanping Cao, Xiuqing Qian e Norbert Huber. “Spherical indentation

into elastoplastic materials: Indentation-response based definitions of the representative strain”. In: Materials Science and Engineering: A 454 (2007), pp. 1–13.

[11] Xi Chen, John W Hutchinson e Anthony G Evans. “The mechanics of indentation induced lateral cracking”. In: Journal of the American Ceramic Society 88.5 (2005), pp. 1233–1238.

[12] Xi Chen et al. “On the uniqueness of measuring elastoplastic properties from indentation: the indistinguishable mystical materials”. In: Journal of the Mechanics and Physics of Solids 55.8 (2007), pp. 1618–1660. [13] Yang-Tse Cheng e Che-Min Cheng. “Scaling approach to conical

in-dentation in elastic-plastic solids with work hardening”. In: Journal of Applied Physics 84.3 (1998), pp. 1284–1291.

[14] Yang-Tse Cheng e Che-Min Cheng. “Scaling, dimensional analysis, and indentation measurements”. In: Materials Science and Engineering: R: Reports 44.4 (2004), pp. 91–149.

[15] M Dao et al. “Computational modeling of the forward and reverse problems in instrumented sharp indentation”. In: Acta materialia 49.19 (2001), pp. 3899–3918.

[16] LLdiko E Frank e Jerome H Friedman. “A statistical view of some che-mometrics regression tools”. In: Technometrics 35.2 (1993), pp. 109– 135.

[17] Jerome H Friedman. “Multivariate adaptive regression splines”. In: The annals of statistics (1991), pp. 1–67.


[18] H Habbab, BG Mellor e S Syngellakis. “Post-yield characterisation of metals with significant pile-up through spherical indentations”. In: Acta materialia 54.7 (2006), pp. 1965–1973.

[19] Fahmy M Haggag et al. “Use of automated ball indentation testing to measure flow properties and estimate fracture toughness in metallic materials”. In: Applications of automation technology to fatigue and fracture testing. ASTM International, 1990.

[20] Fahmy M Haggag et al. “Use of Portable/In Situ Stress-Strain Mi-croprobe System to Measure Stress-Strain Behavior and Damage in Metallic Materials and Structures”. In: Nontraditional Methods of Sen-sing Stress, Strain, and Damage in Materials and Structures. ASTM International, 1997.

[21] Trevor Hastie, Robert Tibshirani e Jerome Friedman. “Unsupervised learning”. In: The elements of statistical learning. Springer, 2009, pp. 485– 585.

[22] Heinrich Hertz. “Uber die Beruhrung fester elastischer Korper”. In: Journal fur die reine und angewandte Mathematik 92 (1882), pp. 156– 171.

[23] Heinrich Rudolf Hertz. “ ¨Uber die Ber¨uhrung fester elastischer K¨orper und ¨uber die H¨arte”. In: (2006).

[24] RFRS Hill, B Storakers e AB Zdunek. “A theoretical study of the Brinell hardness test”. In: Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences. Vol. 423. 1865. The Royal Society. 1989, pp. 301–330.

[25] Rodney Hill. The mathematical theory of plasticity. Vol. 11. Oxford university press, 1998.

[26] Kenneth Langstreth Johnson e Kenneth Langstreth Johnson. Contact mechanics. Cambridge university press, 1987.

[27] KL Johnson. “The correlation of indentation experiments”. In: Journal of the Mechanics and Physics of Solids 18.2 (1970), pp. 115–126.


[28] N Kind et al. “Plasma-sprayed coatings: Identification of plastic pro-perties using macro-indentation and an inverse Levenberg–Marquardt method”. In: Mechanics of Materials 98 (2016), pp. 22–35.

[29] L Kogut e K Komvopoulos. “Analysis of the spherical indentation cycle for elastic–perfectly plastic solids”. In: Journal of materials research 19.12 (2004), pp. 3641–3653.

[30] K Komvopoulos e N Ye. “Three-dimensional contact analysis of

elastic-plastic layered media with fractal surface topographies”. In: TRANSACTIONS-AMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL

OF TRIBOLOGY 123.3 (2001), pp. 632–640.

[31] Hyungyil Lee, Jin Haeng Lee e George M Pharr. “A numerical ap-proach to spherical indentation techniques for material property evalua-tion”. In: Journal of the Mechanics and Physics of Solids 53.9 (2005), pp. 2037–2069.

[32] Jin Haeng Lee, Taehyung Kim e Hyungyil Lee. “A study on robust indentation techniques to evaluate elastic–plastic properties of metals”. In: International Journal of Solids and Structures 47.5 (2010), pp. 647– 664.

[33] AEH Love. “Boussinesq’s problem for a rigid cone”. In: The Quarterly Journal of Mathematics 10 (1939), pp. 161–175.

[34] JR Matthews. “Indentation hardness and hot pressing”. In: Acta me-tallurgica 28.3 (1980), pp. 311–318.

[35] Sinisa Dj Mesarovic e Norman A Fleck. “Spherical indentation of elastic– plastic solids”. In: Proceedings of the Royal Society of London A: Ma-thematical, Physical and Engineering Sciences. Vol. 455. 1987. The Royal Society. 1999, pp. 2707–2728.

[36] E Meyer. Untersuchungen ¨uber Harteprufung und H¨arte, Zeitschr. 1908. [37] S Milborrow. Derived from mda: mars by Trevor Hastie and Rob Tib-shirani. Uses Alan Miller’s Fortran utilities with Thomas Lumley’s leaps wrapper.(2016). earth: Multivariate Adaptive Regression Splines. R package version 4.4. 4. 2016.


[38] Bernardo Disma Monelli. “Mechanical Characterization of Metallic Ma-terials by Instrumented Spherical Indentation Testing”. Tesi di dott. University of Trento, 2010.

[39] Neville R Moody et al. Fundamentals of nanoindentation and nano-tribology. Rapp. tecn. Warrendale, PA (United States); Materials Re-search Society, 1998.

[40] Charbel Moussa et al. “Evaluation of the tensile properties of a material through spherical indentation: definition of an average representative strain and a confidence domain”. In: Journal of Materials Science 49.2 (2014), pp. 592–603.

[41] Charbel Moussa et al. “Identification of the hardening law of materials with spherical indentation using the average representative strain for several penetration depths”. In: Materials Science and Engineering: A 606 (2014), pp. 409–416.

[42] TO Mulhearn. “The deformation of metals by Vickers-type pyrami-dal indenters”. In: Journal of the Mechanics and Physics of Solids 7.2 (1959), pp. 85–88.

[43] A Nayebi et al. “New method to determine the mechanical properties of heat treated steels”. In: International journal of mechanical sciences 43.11 (2001), pp. 2679–2697.

[44] A Nayebi et al. “New procedure to determine steel mechanical pa-rameters from the spherical indentation technique”. In: Mechanics of Materials 34.4 (2002), pp. 243–254.

[45] Jorge Nocedal e Stephen J Wright. Numerical optimization 2nd. 2006. [46] AL Norbury e T Samuel. “The recovery and sinking-in or piling-up of material in the Brinell test, and the effects of these factors on the correlation of the Brinell with certain other hardness tests”. In: J. Iron Steel Inst., London 117 (1928), pp. 673–687.

[47] Nagahisa Ogasawara, Norimasa Chiba e Xi Chen. “A simple framework of spherical indentation for measuring elastoplastic properties”. In: Mechanics of materials 41.9 (2009), pp. 1025–1033.


[48] Nagahisa Ogasawara, Norimasa Chiba e Xi Chen. “Representative strain of indentation analysis”. In: Journal of Materials Research 20.08 (2005), pp. 2225–2234.

[49] Warren C Oliver e Georges M Pharr. “Measurement of hardness and elastic modulus by instrumented indentation: Advances in understan-ding and refinements to methodology”. In: Journal of materials re-search 19.01 (2004), pp. 3–20.

[50] Warren Carl Oliver e George Mathews Pharr. “An improved techni-que for determining hardness and elastic modulus using load and di-splacement sensing indentation experiments”. In: Journal of materials research 7.06 (1992), pp. 1564–1583.

[51] Hugh O’Neill. Hardness measurement of metals and alloys. Chapman & Hall, 1967.

[52] Hugh O’Neill. “The significance of tensile and other mechanical test properties of metals”. In: Proceedings of the Institution of Mechanical Engineers 151.1 (1944), pp. 116–146.

[53] YJ Park e GM Pharr. “Nanoindentation with spherical indenters: finite element studies of deformation in the elastic–plastic transition regime”. In: Thin Solid Films 447 (2004), pp. 246–250.

[54] Siddhartha Pathak e Surya R Kalidindi. “Spherical nanoindentation stress–strain curves”. In: Materials Science and Engineering: R: Re-ports 91 (2015), pp. 1–36.

[55] GM Pharr, WC Oliver e FR Brotzen. “On the generality of the relation-ship among contact stiffness, contact area, and elastic modulus during indentation”. In: Journal of materials research 7.03 (1992), pp. 613– 617.

[56] LE Samuel e TO Mulhearn. “The Deformed Zone Associated with In-dentation Hardness Impressions”. In: Journal of the Mechanics and Physics of Solids 5 (1956).


[57] Z Song e K Komvopoulos. “Elastic–plastic spherical indentation: de-formation regimes, evolution of plasticity, and hardening effect”. In: Mechanics of Materials 61 (2013), pp. 91–100.

[58] American Association of State Highway et al. E8M-04 Standard Test Methods for Tension Testing of Metallic Materials (Metric) 1. ASTM International, 2004.

[59] H Stute. “Investigations about the influence of grease on the Brinell hardness of steel”. In: Hardness Testing in Theory and Practice (1978), pp. 185–190.

[60] D Tabor. The Hardness of Metals, Clarendon. 1951.

[61] David Tabor. “The hardness of solids”. In: Review of physics in tech-nology 1.3 (1970), p. 145.

[62] B Taljat e GM Pharr. “Development of pile-up during spherical inden-tation of elastic–plastic solids”. In: International Journal of Solids and Structures 41.14 (2004), pp. 3891–3904.

[63] Boˇstjan Taljat, Thomas Zacharia e Franc Kosel. “New analytical pro-cedure to determine stress-strain curve from spherical indentation da-ta”. In: International Journal of Solids and Structures 35.33 (1998), pp. 4411–4426.

[64] Stephen P Timoshenko e J Goodier. “Theory of elasticity”. In: (2011). [65] Y Tirupataiah e G Sundararajan. “On the constraint factor associated with the indentation of work-hardening materials with a spherical ball”. In: Metallurgical transactions A 22.10 (1991), pp. 2375–2384.

[66] Mingzhi Wang et al. “Identification of elastic-plastic properties of metal materials by using the residual imprint of spherical indentation”. In: Materials Science and Engineering: A 679 (2017), pp. 143–154.

[67] Manhong Zhao et al. “A new approach to measure the elastic–plastic properties of bulk materials using spherical indentation”. In: Acta Ma-terialia 54.1 (2006), pp. 23–32.


Documenti correlati

On the contrary, the score for maintaining the culture of origin in the central domains of life increased and was specific to the agreement between dyad partners; the scores

When a level is created, obviously there are no grabbed object, so grabbing is set to false and grabbing_index to −1 which is the convention equivalent to no grab- bing. We

Based on the theory of material thermodynamic surface tension, a research has been conducted on the relationship between vacancy formation energy and elastic deformation parameter

To sum up, in this paper we have proposed an analysis of the mirative import which can be associated with the fronting of a focal constituent in Italian: this conveys that the

The histological feature of this tumor, which is considered a borderline neoplasm and therefore necessi- tating a close follow-up, does not predict the clinical course;

Quasi che, insomma, le tecniche costruttive elaborate e affinate dalla letteratura, dalla filosofia, dalla storia socio- culturale d'Europa in materia di propiocezione

Questo per me è fondamentale in quanto dimostra che assieme siamo riusciti a creare un ambiente tranquillo e sicuro per potersi esprimere al meglio, per poter

Figure 6.22: Side and top view of the displacement vectors when the displaced central particle is of type B. The A and B particles are represented respectively in blue and red

From the previous Example 4 we find that even for strictly monotone functions f(x) Newton‘s method may not always converge from arbitrary starting points x 0 , but only from starting

In the analysis of telescopic booms, regarding a large gamma of general aspects as models, stress evaluation, deflection or buckling, it is a common practice to refer to

Sloan in 1995 [17] and initially used mainly on the whole sphere [13], hyperinterpolation is essentially an orthogonal (Fourier-like) projection on polynomial spaces, with respect

The problem of being unable to find a numerical solution of the equation to the output current in a single diode equivalent model with series and shunt resistance had been

In this paper, the elastic behavior, plastic behavior and damage behavior provided by the connector element in Abaqus are used to simulate the isolation bearing

two different of yield values achieved (Y=5.63; b)Y=0.8) are presented in Fig.2. Numerical simulation was performed using Matlab software. We can observe that for this

Keywords—bituminous mixtures; deviatoric and isotropic stress/strain components; discrete numerical models; finite element method; parameter estimate; structural

Assuming zero these losses, and simulating the heating process with constant active power applied, power lost in the copper is maximum at the end of the heating, as it

Il parco giochi è stato posizionato in prossimità del centro di aggregazione sociale, in modo da poter essere facilmente raggiungibile dal centro abitato attraverso il

Saturnino A.(a cura di), Le Agende 21 locali, Quaderni Formez. Scalzo A., La politica regionale di sviluppo 2007-2013 nella dimensione urbana:analisi delle opportunità, ANCI

During the testing of our system, the consideration was made that the head detection module might be used in the tracking algorithm by taking advantage of

In figure 5.9 and 5.10 is presented the normalized normal stress applied by the soil on the pipe at the different phases of loading of the model with the two sands.. It can be

Using a rat model of transient cerebral I/R, we investigated the effects of an epimerised N-,O-sulfated K5 polysaccharide derivative, K5-N,OSepi, on the infarct size, motor

Because of the narrow space inside the tubes and the tendency for the measuring points to destroy the film condensate, the current experimental research only focuses on the