93
BIBLIOGRAFIA
1. K. L. Johnson. Contact Mechanics. Cambridge University Press, 1985;
2. J. Dundurs, M. S. Lee. “Stress concentration at a sharp edge in contact problems”. Journal of Elasticity, vol. 2, no 2, June 1972;
3. F.Pace. “Modellazione del contatto tra ingranaggi cilindrici a denti dritti”. DIMNP Ingegneria, Università di Pisa;
4. Ansys® 7.0 Documentation;
5. D. A. Hills, D. Nowell, A. Sackfield. Mechanics of Elastic Contacts. Butterworth - Heinemann Ltd, 1993;
6. S. Timoshenko, J. N. Goodier. Theory of Elasticity, 3rd ed. McGraw - Hill, New York, 1970;
7. Sandeep M. Vijayakar. “Edge effect in gear tooth contact”, Power transmission and gearing conference, de-vol. 88, ASME 1996.
8. M. Hetènyi, “A general solution for the elastic quarte space”, Journal of applied mechanics, march 1970.
9. M. T. Hanson, L. M. Keer. “Mechanics of edge effects on frictionless contacts”, International journal solids structures, vol.32, no. ¾, 1995, pp. 391-405;
10. S.G. Mikhlin. Integral Equation. Pergamon Press, 1957;
11. G.M. Gladwell. Contact Problems in the Classical Theory of Elasticity. 1980;
12. R. C. Juvinall. Engineering Considerations of Stress, Strain and Strength. McGraw - Hill, New York, 1967;
13. C. Lipson, R. C. Juvinall. Handbook of Stress and Strength, MacMillan, New York, 1963;
14. L.M. Keer, J. C. Lee and T. Mura. “Hetènyi’s elastic quarter space problem revisited”, Int. j. solids structures, vol.19, no. 6, pp. 497-506, 1983.
15. R. Kadhem, J. J. O’Connor. “Adhesive or frictionless compression of an elastic rectangle between two identical elastic half-spaces”, Int. j. engng sci, vol.7, pp.153-168, 1969.
16. N. Ahmadi, L. M. Keer and T. Mura. “Non-Hertzian contact stress analysis for an elastic half space-normal and sliding contact”, Int. j. solids structures, vol.19, no. 4, pp. 357-373, 1973.
17. M. T. Hanson. “The elastic field for an upright or tilted sliding circular flat punch on a transversely isotropic halp space”, Int. j. solids structures, vol.31, no. 4, pp. 567-586, 1994.
18. M. Ciavarella. “Indentation by nominally flat or conical indenters with rounded corners”, Int. j. solids structures, vol.36, pp. 4149-4181, 1999.
19. D. B. Bogy. “Two edge-bonded elastic wedges of different materials and wedge angles under surface tractions”, Journal Appl. Mech., vol. 38, pp. 377-386, 1971.
20. D. B. Bogy. “Stress singularities at interface corners in bonded dissimilar isotropic elasic materials”, Int. j. solids structures, vol.7, pp. 903-1005, 1971.
21. Sandeep M. Vijayakar. “A combined surface integral and finite element solution for a three dimensional contact problem”, International Journal for Numeric Method in Engineering, vol.31, pp.525-545, 1991.
22. G. Lundberg. “Elastische Beruhung zweier Helbraume”, Forschung a. d. Gebeite des Ingenieurwesens, 10, 201, 1939;
23. Sandeep M. Vijayakar. Helical 3D User’s Manual, www.ansol.com, Feb. 2003 .
24. F. Presicce, “Un diverso approccio nello studio dell’ingranamento delle ruote dentate cilindriche a denti dritti”, DIMNP Ingegneria, Università di Pisa;
94 25. J. Dundurs, “Some properties of elastic stresses in a composite”. Recent Adavances in
