Professor Marco Albini, Francesca Franceschi, Architect Francesco Bombardi Student: Omid Vernoos, 752100 BRERA IN BRERA
PATTERN which repeats in both HORIZONTAL
and VERTICAL direction which is composed by semitransparent, transparent and empty modules.
08 CENTRAL YARD_details 1:10
view of the temporary exhibition spaces under the platforms
initial idea of the rails
view of the temporary exhibition spaces under the platforms detail sketches of the plexiglass rail
fall prevention glass rail composed by no. 2 laminated glasses, each 20 mm thick, interposed with anti-crushing plastic material
glass flooring panels composed by no. 2 laminated glasses, each 20 mm thick, interposed with anti-crushing plastic material
8/10 thick steel sheet applied on the new concrete wall
"T" steel profile applied on the new concrete wall by bolts supporting the double glass beam
glass beam composed by no. 2 glass panels, each 400 mm high, 25 mm thick, joined by screws and attached to the T steel profile steel beam for glass paving division, composed by no. 2 steel plates, each 20 mm thick, reinforced by another 2 smaller ones, and bolted together
rivets for the anchorage of the steel covering sheet at the new concrete wall
"T" steel profile for the support of every glass floor panels
"U" profile for the anchorage of the glass rail glass roofing panels composed by no. 2
laminated glasses, each 20 mm thick, interposed by two layers of anti-crushing plastic material
"L" steel profile for the closure at the end of the roof panels (joins filled by silicone
double "L" steel profile joined together for the support of the glass roofing panels
steel plate for the connection of the the glass beam and the glass column
glass beam composed by no. 2 glass panels, each 200 mm high, 25 mm thick, joined by screws and attached to the glass column by steel plate
glass column composed by no. 2 glass panels, each 200 mm high, 25 mm thick, joined by screws and attached to the glass beam
40 mm step in laminated glass with anti-slip treatment surface
double steel plate for the support of each step
cast steel profile for step support
reinforced concrete with steel bars background of polished lightweight concrete fo the pose of the resin flooring
resin finish (thickness 2-5 mm)
steel element for the support of the base of the steel plate
steel sheet and reinforced concrete with steel bars
background of polished lightweight concrete fo the pose of the resin flooring
resin finish (thickness 2-5 mm)
5 mm thick dBred fonotech acoustic insulation turning inwards in both directions
IPE 200 steel structure
fall prevention glass rail composed by no. 2 laminated glasses, each 20 mm thick, interposed with anti-crushing plastic material
corrugated structural steel
double "L" steel profile joined together for the support of the glass facade panels
glass beam composed by no. 2 glass panels, each 200 mm high, 25 mm thick, joined by screws and attached to the glass column by steel plate
glass column composed by no. 2 glass panels, each 200 mm high, 25 mm thick, joined by screws and attached to the glass beam
steel plate for the anchor of the glass column at the reinforced concrete at the base
IPE 200 steel structure
no. 2 glass panels, each 12 mm thick, the top one covered with reflective coating and an interspace of air gap of 20 mm
steel rod composed of twisted wires steel "L" profile 200 mm
reinforced concrete for the anchor of the glass column
custom made element for the support of the roof glass panels
fall prevention glass rail composed by no. 2 laminated glasses, each 20 mm thick, interposed with anti-crushing plastic material
steel rod composed of twisted wires adjustable through the draft of the screws
steel rod composed of twisted wires adjustable through the draft of the screws hanging the whole facade
custom made IPE 1500
40 mm thick polycarbonate panel steel beam running around polycarbonate panels, composed by no. 2 steel plates, each 20 mm thick, and an interspace working as a connection between horizontal and vertical elements
steel plates for the anchor of the steel structure of the facade
steel "L" profile running along the polycarbonate panels for the anchor at the primary facade structure composed by no. 2 steel plates
PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT