Bibliografia
D. F. Adams, L. A. Carlsson, e R. B. Pipes. Experimental Characterization of Advanced Composite Materials. CRC Press, Boca Raton, third edition, 2003.
O. Allix e P. Ladevèze. Interlaminar interface modelling for the prediction of delamination. Composite Structures, 22(4):235–242, 1992.
M. G. Andrews, R. Massabò, A. Cavicchi, e B. N. Cox. Dynamic interaction effects of multiple delami- nations in plates subject to cylindrical bending. International Journal of Solids and Structures, 46(9):
1815–1833, 2009.
ASTM D5528-13. Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites. American Society for Testing and Materials, West Conshohocken, 2013.
ASTM D6671/D6671M-13. Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites. American Society for Testing and Materials, West Conshohocken, 2013.
A. A. Baker, S. Dutton, e D. W. Kelly. Composite Materials for Aircraft Structures. American Institute of Aeronautics and Astronautics, Inc., Reston, second edition, 2004.
S. Bennati, M. Colleluori, D. Corigliano, e P. S. Valvo. An enhanced beam-theory model of the asymmetric double cantilever beam (ADCB) test for composite laminates. Composites Science and Technology, 69(11-12):1735–1745, 2009.
S. Bennati, N. Dardano, e P. S. Valvo. Un modello meccanico per travi inflesse rinforzate con FRP. In XXI Convegno Nazionale IGF, Cassino, 2011.
S. Bennati, P. Fisicaro, e P. S. Valvo. An enhanced beam-theory model of the mixed-mode bending (MMB) test – Part I: Literature review and mechanical model. Meccanica, 48(2):443–462, 2013a.
S. Bennati, P. Fisicaro, e P. S. Valvo. An enhanced beam-theory model of the mixed-mode bending (MMB) test – Part II: Applications and results. Meccanica, 48(2):465–484, 2013b.
S. Bennati, L. Taglialegne, e P. S. Valvo. A mechanical model of the four-point end notched flexure (4ENF) test based on an elastic–brittle interface. In 17th European Conference on Fracture 2008: Mul- tilevel Approach to Fracture of Materials, Components and Structures (ECF, Brno, Czech Republic, 2
— 5 september 2008), volume 2, pages 1584–1591, sep 2008.
S. Bennati e P. S. Valvo. An elastic-interface model for delamination buckling in laminated plates. Key Engineering Materials, 221-222:293–306, 2001.
S. Bennati e P. S. Valvo. An elastic interface model for mixed-mode fracture of adhesive joints. In XIX Congresso Nazionale dell’Associazione Italiana di Meccanica Teorica e Applicata, Ancona, 2009.
AIMETA.
129
130 BIBLIOGRAFIA
S. Bennati e P. S. Valvo. An experimental compliance calibration strategy for estimating the elastic interface constants of delamination test specimens. In XXI Congresso Nazionale dell’Associazione Italiana di Meccanica Teorica e Applicata, Torino, 2013. AIMETA.
S. Bennati e P. S. Valvo. An experimental compliance calibration strategy for mixed-mode bending tests.
Procedia Materials Science, 3(0):1988–1993, 2014. 20th European Conference on Fracture.
D. Broek. Elementary Engineering Fracture Mechanics. Kluwer Academic Publishers, Dordrecht, 1982.
G. Bruno. Frattura interlaminare dei laminati compositi: un modello della prova end-notched flexure.
Tesi di Laurea in Ingegneria Aerospaziale (primo relatore: Prof. S. Bennati) – Università di Pisa, 2006.
A. Corigliano. Formulation, identification and use of interface models in the numerical analysis of composite delamination. International Journal of Solids and Structures, 30(20):2779–2811, 1993.
D. Corigliano e M. Colleluori. La delaminazione nei materiali compositi: un caso di frattura interlami- nare secondo il modo I. Tesi di Laurea in Ingegneria Aerospaziale (primo relatore: Prof. S. Bennati) – Università di Pisa, 2004.
J. H. Crews, Jr. e J. R. Reeder. A mixed-mode bending apparatus for delamination testing. Techni- cal Report TM-100662, National Aeronautics and Space Administration, Langley Research Center, Hampton, aug 1988.
P. Davies, H. H. Kausch, J. G. Williams, A. J. Kinloch, et al. Round-robin interlaminar fracture testing of carbon-fibre-reinforced exopy and PEEK composites. Composites Science and Technology, 43:
129–136, 1992.
A. M. de Bastos Pereira. Fractura interlaminar de compósitos de matriz polimérica. PhD thesis, Universidade de Aveiro, 2006.
F. Ducept, D. Gamby, e P. Davies. A mixed-mode failure criterion derived from tests on symmetric and asymmetric specimens. Composites Science and Technology, 59(4):609–619, 1999.
P. Fisicaro. Danneggiamento e frattura dei laminati compositi: un modello della prova end-loaded split.
Tesi di Laurea in Ingegneria Aerospaziale (primo relatore: Prof. S. Bennati) – Università di Pisa, 2006.
A. A. Griffith. The phenomena of rupture and flow in solids. Philosophical Translations of the Royal Society of London, 221:163–198, 1921.
J. W. Hutchinson e Z. Suo. Mixed mode cracking in layered materials. Advances in Applied Mechanics, 29(C):63–191, 1991.
C. E. Inglis. Stresses in a plate due to the presence of cracks and sharp corners. Transactions of the Royal Institution of Naval Architects, 55:219–230, 1913.
G. R. Irwin. Fracture dynamics. In Fracturing of Metals, pages 147–166, Cleveland, 1948. ASM.
R. M. Jones. Mechanics Of Composite Materials. Materials Science and Engineering Series. Taylor &
Francis, Inc., Philadelphia, second edition, 1999.
M. F. Kanninen. An augmented double cantilever beam model for studying crack propagation and arrest.
International Journal of Fracture, 9(1):83–92, 1973.
A. K. Kaw. Mechanics of composite materials. CRC Press, Boca Raton, second edition, 2006.
A.J. Kinloch, Y. Wang, J.G. Williams, e P. Yayla. The mixed-mode delamination of fibre composite materials. Composites Science and Technology, 47(3):225–237, 1993.
BIBLIOGRAFIA 131
Z. Liu, P. S. Valvo, Y. Huang, e Z. Yin. Cohesive failure analysis of an array of IC chips bonded to a stretched substrate. International Journal of Solids and Structures, 50(22–23):3528–3538, 2013.
M. C. Y. Niu. Airframe Stress Analysis and Sizing. Commilit Press Ltd., 1997.
N. O’Dowd. Advanced fracture mechanics: lectures on fundamentals of elastic, elastic-plastic and creep fracture. Department of Mechanical Engineering, Imperial College, London, 2002.
E. Orowan. Fracture and strength of solids. Reports on Progress in Physics, 12:185–232, 1949.
N. J. Pagano e G. A. Schoeppner. 2.13 - Delamination of polymer matrix composites: Problems and assessment. In A. K. C. Zweben, editor, Comprehensive Composite Materials, pages 433–528.
Pergamon, Oxford, 2000.
W. Qian e C. T. Sun. Methods for calculating stress intensity factors for interfacial cracks between two orthotropic solids. International Journal of Solids and Structures, 35(25):3317–3330, 1998.
J. R. Reeder e J. H. Crews, Jr. Nonlinear Analysis and Redesign of the Mixed-Mode Bending Delami- nation Test. Technical Report TM-102777, National Aeronautics and Space Administration, Langley Research Center, Hampton, jan 1991.
E. F. Rybicki e M. F. Kanninen. A finite element calculation of stress intensity factors by a modified crack closure integral. Engineering Fracture Mechanics, 9(4):931–938, 1977.
N. Sela e O. Ishai. Interlaminar fracture toughness and toughening of laminated composites materials: a review. Composites, 20(5):423–435, 1989.
P. S. Shivakumar Gouda, Vijay Chatterjee, P. K. Barhai, Dayananda Jawali, et al. Improved fractu- re toughness in carbon fibre epoxy composite through novel pre-preg coating method using epoxy terminated butadiene nitrile rubber. Materials and Design, 62:320–326, 2014.
C. T. Sun e Z. H. Jin. Fracture Mechanics. Academic Press, Boston, 2012.
Z. Suo. Singularities, interfaces and cracks in dissimilar anisotropic media. In Proceedings of the Royal Society of London, Series A, Mathematical and Physical Sciences, Volume 427, Issue 1873, pages 331–358, 1990.
Z. Suo e J. W. Hutchinson. Interface crack between two elastic layers. International Journal of Fracture, 43(1):1–18, 1990.
L. Taglialegne. La delaminazione dei laminati compositi: un modello meccanico della prova Four-point End Notched Flexure (4ENF). Tesi di Laurea in Ingegneria Aerospaziale (primo relatore: Prof. S.
Bennati) – Università di Pisa, 2007.
T. E. Tay. Characterization and analysis of delamination fracture in composites: An overview of developments from 1990 to 2001. Applied Mechanics Reviews, 56(1):1–31, 2003.
S. P. Timoshenko. Strenght of Materials, volume I - Elementary Theory and Problems. D. Van Nostrand Company, Inc., New York, second edition, 1940.
S. P. Timoshenko e J. N. Goodier. Theory of Elasticity. Engineering Societies Monographs. McGraw–Hill Book Company, Inc., New York, 1951.
L. Tong, A. P. Mouritz, e M. K. Bannister. 3D Fibre Reinforced Polymer Composites. Elsevier Science Ltd., Oxford, 2002.
P. Vannucci. Materiali compositi per impieghi strutturali: metodi di analisi e progetto. Dispense del corso tenuto presso l’Università di Pisa, 2002.
132 BIBLIOGRAFIA
P. Vannucci e G. Verchery. A special class of uncoupled and quasi-homogeneous laminates. Composites Science and Technology, 61:1465–1473, 2001.
V. V. Vasiliev e E. Morozov. Advanced Mechanics of Composite Materials. Elsevier Science Ltd., Oxford, 2007.
J. R. Vinson e T. W. Chou. Composite materials and their use in structures. Applied Science Publishers Ldt, Barking, 1975.
F. Werren e C. B. Norris. Mechanical properties of a laminate designed to be isotropic. Technical Report 1841, US Forest Products Laboratory, 1953.
J. G. Williams. On the calculation of energy release rates for cracked laminates. International Journal of Fracture, 36:10–119, 1988.
M. L. Williams. The stresses around a fault or crack in dissimilar media. Bulletin of the Siesmological Society of America, 49(2):199–204, 1959.
