Capi
t
ol
o
5:
Ri
f
eri
ment
i
Bi
bl
i
ograf
i
ci
(1) T. Seidenstucker & H.-G.Fritz, Innovative biodegradabile materials based upon starch and thermoplastic poly(ester-urethane) (TPU), Pol. Deg. And Stab., 59, 279-285 (1998) (2) Uve Witt, M. Yamamoto, U. Seeliger, R.-J. Muller and V.Warzelhan, Biodegradable
Polymeric Materials-Not the Origin but the Chemical Structure Determines Biodegradability, Angew. Chem. Int. Ed., 38 (10), 1438-1441 (1999)
(3) R.-J. Muller, I. Kleeberg and W.-D. Deckwer, Biodegradation of polyesters containing aromatic constituens, J. of Biotech., 86, 87-95 (2001)
(4) U. Witt, T. Einig, M. Yamamoto, I. Kleeberg, W.-D. Deckwer and R.-J. Muller, Biodegradation of aliphatic-aromatic copolyesters: evaluation of the final biodegradability and ecotoxicological impact of degradation intermediates, Chemosphere, 44, 289-299 (2001)
(5) SIDS Initial Assessment Report For 12th SIAM (Paris, France June 2001), Terephthalic Acid (TPA) CAS N°:100-21-0, http://www.inchem.org/documents/sids/sids/100-21-0.pdf
(6) Zampano Giovanni, Tesi Specialistica in Chimica Industriale, Anno Accademico 2005-2006
(7) Hasirci, Vasif , Poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) based tissue engineering matrices, J. of Materials Science: Materials in Medicine, 14, 121-126 (2003). DOI:10.1023/A:1022063628099. ISSN 0957-4530
(8) R. Auras, B. Harte, S.Helke, An overview of Polylactides as Packaging Materials, Macromol. Biosci., 4, 835-864 (2004)
(9) S.S. Ray, K. Yamada, M. Okamoto, K. Ueda, Polylactide-Layered silicate
nanocomposite: a novel biodegradable material, Nanoletters, vol.2, No.10, 1093-1096 (10) F. Ciardelli, S. Bronco, M.B. Coltelli, I. Della Maggiore, S. Savi, F. Signori, L. Ricci, V.
Liuzzo, PICUS - Development of a 100% Biodegradabile Plastic Fibre to Manifacture Twines to Stake Creeping Plants and Nets for Packaging Agricultural Products
(11) Frederic Chivrac, Zuzana Kadlecova, Eric Pollet, Luc Averous, Aromatic copolyester-based nano-biocomposites: elaboration, structural characterization and properties, J. of Pol. Env.
(12) E.T.H. Vink, K.R. Rabago, D.A. Glassner, P.R. Gruber, Applicazioni dello studio sul ciclo di vita alla produzione del polilattide (PLA) Nature WorksTM, Pol. Deg. And Stab., 80, 403-419 (2003)
(13) R.A. Auras, S.P. Singh and J.J. Singh, Evaluation of Oriented Poly(lactide) Polymers vs. Existing PET and oriented PS for fresh food containers, Packag. Technol. Sci., 18, 207-216 (2005)
(14) R.A. Auras, B. Harte, S. Selke and R.J. Hernandez, Mechanical, physical and barrier properties of Poly(lactic acid) films
(15) T. Malmgren, J. Mays and M.Pyda, Characterization of poly(lactic acid by size esclusion chromatography, differential refractometry, light scattering and thermal analysis, J of Therm. An. And Cal., 83, 1, 35-40 (2006)
(16) Tadakazu Miyata and Toru Masuko, Cristallization behaviour of poly(L-lactide), Polymer Vol. 39, No. 22, 5515-5521 (1998)
(17) A. Mahendrasingam, D.J. Blundell, M. Parton, A.K. Wright, J. Rasburn, T. Narayanan, W. Fuller, Time resolved study of oriented crystallization of poly(lactic acid) during rapid tensile deformation, Polymer 46, 6009-6015 (2005)
(18) J. Xu, B.-H. Guo, L. Li, J. Wu, M. Kowalczuk, Observation of banded sferulites in pure poly(L-Lactide) and its miscible blends with amorphous polymers, Polymer, 46, 9176-9185 (2005)
(19) J.Y. Nam, M. Okamoto, H. Okamoto, M. Nakano, A. Usuki, M. Matsuda, Morphology and crystallization kinetics in a mixture of low-molecolar weight aliphatic amide and polylactide
(20) M. Ryner,A. Finne, A.-C. Albertsson, H. R. Kricheldorf, L-Lactide Macromonomer Synthesis Initiated by New Cyclic Tin Alkoxides Functionalized for Brushlike Structures, Macromolecules 34, 7281-7287, (2001)
(21) A. Finne, A-C. Albertsson, New Functionalized Polyesters to Achieve Controlled Architectures, J.Pol.Sci, Part A, 42, 444, 2004
(22) A. Finne, A-C. Albertsson, Polyester Hydrogels with Swelling Properties Controlled by the Polymer Architecture, Molecular Weight, and Crosslinking Agent, Journal of Polymer Science: Part A, 41, 1293 (2003)
(23) I. Palard, A. Soum, S. M. Guillaume, Rare Earth Metal Tris(borohydride) Complexes as Initiators for_-Caprolactone Polymerization: General Features and IR Investigations of
(24) O. Coulembier, P. Degee, S. Cammas-Marion, Philippe Guerin, Philippe Dubois, New Amphiphilic Poly[(R,S)-â-malic acid-b-_-caprolactone] Diblock Copolymers by Combining Anionic and Coordination- Insertion Ring-Opening Polymerization, Macromolecules, 2002, 35, 9896-9903
(25) Leghe e formulate polimerici: miscelazione fisica e reattiva, AIM 2-5 maggio 2006- Palazzo Feltrinelli Gargnano (BS)
(26) J.W. Park, S.S. Im, Phase behaviour and morphology in blends of poly(L-lactic acid) and poly(butylene succinate), J.Appl.Pol.Sci., 86, 647-655 (2002)
(27) M. Shibata, Y. Inoue, M. Miyoshi, Mechanical properties, morphology, and
crystallization behaviour of blends of poly(L-lactide) with poly(butylene succinate-co-lactate) and poly(butylene succinate), Polymer, 47, 3557-3564 (2006)
(28) J.-M. Yang, H.-L. Chen, J.-W. You, J. C. Hwang, miscibility and crystallization of poly(L-lactide)/poly(ε-caprolactone) blends, Polym. J., Vol. 29, No. 8, 657-662 (1997) (29) R. Dell’Erba, G. Groeninckx, G. Maglio, M. Malinconico, A. Migliozzi, Immiscible
polymer blends of semicristalline biocompatible components: thermal properties and phase morphology analysis of PLLA/PCL blends, Polymer, 42, 7831-7840 (2001) (30) T. Furukawa, H. Sato, R. Murakami, J. Zhang, Y.-X. Duan, I. Noda, S. Ochiai, Y.
Ozaki, Structure, dispersibility and crystallinity of poly(hydroxybutyrate)/poly(L-lactic acid) blends studied by FT-IR microspectroscopy and differential scanning calorimetry, Macromol., 38, 6445-6454 (2005)
(31) S. Lee, J.W. Lee, Characterization and processing of biodegradable polymer blends of poly(lactic acid) with poly(butylene succinate adipate), Kor.Aus.Rheol.J., vol.17, No.2, 71-77 (2005)
(32) J.A. Ratto, P.J. Stenhouse, M. Auerbach, J. Mitchell, R. Farrell, Processing, performance and biodegradability of a thermoplastic aliphatic polyester/starch system, Polymer 40, 6777-6788 (1999)
(33) R. Jayasekara, S. Sheridan, E. Lourbakos, H. Beh, G.B.Y. Christie, M. Jenkins, P.B. Halley, S. Mc Glashan, G.T. Lonergan, Biodegradation and ecotoxicity evaluation of a bionolle and starch blend and its degradation products in compost, Int. Biodet. & Biodeg. 51, 77-81 (2003)
(34) L.Jiang, M.P. Wolcott, J. Zhang, Study of biodegradable polylactide/poly(butylene adipate-co-terephtalate) blends, Biomacromolecules, 7, 199-207 (2006)
(35) T.-Y. Liu, W.-C. Lin, M.-C. Yang, S.-Y. Chen, miscibility, thermal characterization and crystallization of poly(L-lactide) and poly(tetramethylene adipate-co-terephthalate) blend membranes, Polymer, 46, 12586-12594 (2005)
(36) C.-H. Kim, K.Y. Cho, E.-J. Choi, J.-K. Park, Effect of P(lLA-co-εCL) on the
compatibility and crystallization behaviour of PCL/PLLA blends, J.Appl.Pol.Sci., 77, 226-231 (2000)
(37) N.-S. Choi, C.-H. Kim, K.Y. Cho, J.-K. Park, morphology and hydrolisis of PCL/PLLA blends compatibilized with P(LLA-co-εCL) or P(LLA-b-εCL), J.Appl.Pol.Sci., 86, 1892-1898 (2002)
(38) Y.-H. Na, Y. He, X. Shuai, Y. Kikkawa, Y. Doi, Y. Inoue, compatibilization effect of poly (ε-caprolactone)-b-poly(ethylene glycol) block copolimers and phase morphology analysis in immiscible poly(lactide)/poly(ε-caprolactone) blends, Biomacr., 3, 1179-1186 (2002)
(39) X. Shuai, Y. He, Y.-H. Na, Y. Inoue, Miscibility of block copolimers of poly (ε -caprolactone) and poly(ethylene glycol) with poly(3-hydroxybutirate) as well as the compatibilizing effect of these copolimers in blends of poly(ε-caprolactone) and poly(3-hydroxybutirate), J.Appl.Pol.Sci., 80, 2600-2608 (2001)
(40) X.-J. Xu, J.C. Sy, V.P. Shastri, Towards developing surface eroding poly(α-hydroxy acids), Biomat., 27, 3021-3030 (2006)
(41) M.Stolt, K. Hiltunen, A. Sodergard, Use of iron monocarboxilates in the two-step preparation of poly(ester-urethane)s, Biomacr., 2, 1243-1248 (2001)
(42) T. Tarvainen, T. Karjalainen, M. Malin, S. Pohjolainen, J. Tuominen, J. Seppala, K. Jarvinen, degradation and drug release from a novel 2,2-bis(2-oxazoline) linked poly(lactic acid) polymer, J.Contr.Rel., 81, 251-261 (2002)
(43) T. Nishino, K. Hirao, M. Kotera, X-ray diffraction studies on stress transfer of kenaf reinforced poly(L-lactic acid) composite, Composites part A, 37, 2269-2273 (2006) (44) S.-H. Lee, S. Wang, Biodegradable polymers/bamboo fiber biocomposite with bio-based
coupling agent, Composites part A, 37, 80-91 (2006)
(45) C.L.Jun, Reactive blending of biodegradable polymers: PLA and starch, J. of Pol. And the envir., vol.8, No.1, 33-37 (2000)
(46) H. Wang, X. Sun, P. Seib, Strengthening blends of poly(lactic acid) and starch with methylenediphenyl diisocianate, J.Appl.Pol.Sci., 82, 1761-1767 (2001)
(47) M.B.Coltelli, Catalysed reactive compatibilization of polyolefin and
poly(ethyleneterephthalate): reactions mechanism and phase morphology development, tesi di dottorato, Università di Pisa
(48) C.M. Fontana, J. Polym. Sci. PART A-1, 6, 2343 (1968) (49) C.C. Walker, J.Polym.Sci. Polym. Chem. Ed., 21, 623 (1983)
(50) G.P. Karayannidis, C.P. Roupakias, D.N. Bikiaris, D.S. Achilias, Polymer 44, 931 (2003)
(51) K.Tomita, Polymer, 14, 55 (1973)
(52) W.-Y. Su, Y. Wang, K. Min, R.P. Quirk, In situ copolymerization and compatibilization of polyester and polystyrene blends. I. Synthesis of functionalized polystirenes and the reaction with polyester, Polymer, 42, 5107-5119 (2001)
(53) M.J. Fernandez-Berridi, J.J. Iruin, I. Maiza, Molten polyarilate-poly(butylene
terephthalate) blends: kinetics and statistical analysis of exchange reactions by H1 n.m.r., Polymer, 36, 7, 1357-1361 (1995)
(54) J.I. Eguiazabal, M.J. Fernandez-Berridi, J.J. Iruin, I. Maiza, PBT/Par mixtures: influence of interchange reaction on mechanical and thermal properties, J. Appl.Pol.Sci., 59, 329-337 (1996)
(55) A. Jha, A.K. Bhowmick, Mechanical and dynamic mechanical thermal properties of heat and oil-resistant thermoplastic elastomeric blends of poly(butyene terephthalate) and acrylate rubber, J.Appl.Pol.Sci, 78, 1001-1008 (2000)
(56) J. Wu, K. Wang, D. Yu, Fracture toughness and fracture mechanism of PBT/PC/IM blends, J. of Mat. Blends, 38, 183-191 (2003)
(57) M.B. Coltelli, S. Bianchi, S. Savi, V. Liuzzo, M. Aglietto, Metal catalyst to improve at PO/PET blends interfaces, Macr. Simp., 204, 227-236 (2003)
(58) M.B. Coltelli, I. Della Maggiore, S. Savi, M. Aglietto, F. Ciardelli, Modified styrene-butadiene-styrene block copolimer as a compatibiliser precursor in
polyethylene/poly(ethylene terephthalate) blends, Pol.Deg. and Stab., 90, 211-223 (2005)
(59) Z.-M. Li, W. Yang, B.-H. Xie, S.Y. Yang, M.-B. Yang, J.-M. Feng, R. Huang, Effects of compatibilization on the essential work of fracture parameters of in situ microfibre reinforced poly(ethylene terephthalate)/polyethylene blend, Mat.Res. Bull., 38 1867-1878 (2003)
(60) V.N. Ignatov, C.Carraro, V. Tartari, R. Pippa, F. Pilati, C. Berti, M. Toselli, M. Fiorini, Reactive blending of commercial PET and PC with freshly added catalysts, Polymer, 37, 26, 5883-5887 (1996)
(61) V.N. Ignatov, C.Carraro, V. Tartari, R. Pippa, F. Pilati, C. Berti, M. Toselli, M. Fiorini, PET/PC blends and copolymers by one-step extrusion: 1. Chemical structure and physical properties of 50/50 blends, Polymer, 38, 1, 195-200 (1997)
(62) V.N. Ignatov, C.Carraro, V. Tartari, R. Pippa, F. Pilati, C. Berti, M. Toselli, M. Fiorini, PET/PC blends and copolymers by one-step extrusion: Influence of the initial polymer composition and type of catalyst, Polymer, 38, 1, 201-205 (1997)
(63) P. Marchese, A. Celli, M. Fiorini, Influence of the activity of transesterification catalyst on the phase behaviour of PC/PET blends, Macromol. Chem. Phys., 203, 695-704 (2002)
(64) S. Mbarek, M. Jaziri, C. Carrot, Recycling poly(ethylene terphthalate) wastes: properties of poly(ethylene terephthalate)/polycarbonate blends and the effect of a
transesterification catalyst, Polym. Eng. Sci., 46, 1378-1386 (2006)
(65) L. Wang, W. Ma, R.A. Gross & P.Mc Carthy, Reactive compatibilization of
biodegradable blends of poly(lactic acid) and poly(ε-caprolactone), Pol.Deg. and Stab., 59, 161-168 (1998)
(66) V. Vargha, P. Truter, Biodegradable polymers by reactive blending trans-esterification of thermoplastic starch with poly(vinyl acetate) and poly(vinyl acetate-co-butyl acrilate), Europ. Pol. J., 41, 715-726 (2005)
(67) N.K. Boaen, M.A.Hillmayer, Post-polymerization functionalization of polyolefins, Chem. Soc. Rev., 34, 267-275 (2005)
(68) N. Inagaki, K. Narushima, Y. Tsutsui, Y. Ohyama, Surface modification and
degradation of poly(lactic acid) films by Ar-plasma, J. Adhesion. Sci. Tehnol., 16, 8, 1041-1054 (2002)
(69) W. Sakai, T. Sadakane, W. Nishimoto, M. Nagata, N. Tsutsumi, Photosensitized degradation and crosslinking of linear aliphatic polyesters studied by GPC and ESR, Polymer, 43, 6231-6238 (2002)
(70) J. John, J. Tang, M. Bhattacharya, Gafting of oxazoline functional group to polycaprolactone, J.Appl.Pol.Sci., 67, 1947-1955 (1998)
(72) L.T.Drzal, A.K. Mohanty, M. Misra, S. Joshi, S. Desai, Y. Parulekar, D.G. Miloaga, Sustainable biodegradable green nanocomposites from bacterial bioplastic for automotive applications, http://www.egr.msu.edu/cmsc/biomaterials/index.html
(73) J. John, J. Tang, Z. Yang, M. Bhattacharya, Synthesis and characterization of anhydride-functional caprolactone
(74) R. Mani, M. Bhattacharya, J. Tang, Functionalization of polyesters with maleic anhydride by reactive extrusion, J.Pol.Sci., Part A: Polimer chemistry, 37, 1693-1702 (1999)
(75) Y. Nabar, J.M. Raquez, P. Dubois, R. Narayan, Production of starch foams by twin-screw extrusion: effect of maleated poly(butylene adipate-co-terephthalate) as a compatibilizer, Biomacr., 6, 807-817 (2005)
(76) H. Shinoda, K. Matyjaszewski, Structural of poly(methyl methacrylate)-g-poly(lactic acid) graft copolymers by atom transfer radical polymerization (ATRP), Macromol., 34, 6243-6248 (2001)
(77) M. Avella, M.E. Errico, B. Immirzi, M. Malinconico, L. Falcigno, L. Paolillo, Radical polymerization of methyl methacrylate in the presence of biodegradable poly(L-lactic acid). Preparation of blends, chemical-physical characterization and morphology, Macromol. Chem. Phys., 201, 1295-1302 (2000)
(78) C.-S. Wu, H.-T. Liao, A new biodegradable blends prepared from polylactide and hyaluronic acid, polymer 46, 10017-10026 (2005)
(79) R.M. Silverstein, G.C. Bassler, T.C. Morrill, Spectrometric identification of organic compounds, 5th ed. New York, John Wiley & sons, 1991
(80) Giovanni Baldi, Corso di scienza e tecnologia dei vetri,
http://spazioinwind.libero.it/giovann_baldi/Capitolo%206/Capitolo%206.htm
(81) S.J. de Jong, E.R. Arias, D.T.S. Rijkers, C.F. van Nostrum, J.J. Kettenes-van den Bosch, W.E. Hennink, New insights into the hydrolytic degradation of poly(lactic acid):
participation of the alcohol terminus, Polymer, 42, 2795-2802 (2001)
(82) O. Dechy-Cabaret, B. Martin-Vaca, D. Bourissou, Controlled Ring-Opening Polymerization of Lactide and Glycolide, Chem. Rev, 104, 6147-6176 (2004)
(83) A. C. Albertsson, I. K.Varma, Recent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications, Biomacromolecules, 4, 1466-1486 (2003)
(84) Ph. Degée, Ph. Dubois, S. Jacobsen, H.-G. Fritz, R. Jérome, Beneficial Effect of Triphenylphosphine on the Bulk Polymerization of L,L-Lactide Promoted by
2-Ethylhexanoic Acid Tin (II) Salt, Journal of Polymer Science: Part A: Polymer Chemistry, Vol. 37, 2413–2420 (1999)
(85) Sven Jacobsen , Hans-Gerhard Fritz , Philippe Degée , Philippe Dubois , Robert Jerome, New developments on the ring opening polymerisation of Polylactide, Industrial Crops and Products, 11, 265–275 (2000)
(86) M. Guaita, F. Ciardelli, F. La Mantia, E. Pedemonte, Fondamenti di scienza dei polimeri, AIM, Pacini editore
(87) G.Liu, M.Jia, Z.Zhou, L.Wang, W.Zhang, D.Jiang, Synthesis and pore formation study of amorphous mesoporous alluminophosphates in the presence of citric acid, J.of coll. and int.sci., 302, 278-286 (2006)
(88) G.D.Cody, N.Z.Boctor, R.M.Hazen, J.A.Brandes, H.J.Morowitz, H.S.Yoder, Geochemical roots of autotrophic carbon fixation:hydrothermal experiments in the system citric acid, Geoch. And Cosm. Acta, 65, 20, 3557-3576 (2001)
