• Non ci sono risultati.

[C4] F. Vellucci, G. Pede, F. Baronti, R. Di Rienzo, F. Cignini:” Effects of fast charge on a lithium-ion battery system" 2016 Electric Vehicle Symposium & Exhibition 29 (EVS29), June 19-22, 2016

N/A
N/A
Protected

Academic year: 2021

Condividi "[C4] F. Vellucci, G. Pede, F. Baronti, R. Di Rienzo, F. Cignini:” Effects of fast charge on a lithium-ion battery system" 2016 Electric Vehicle Symposium & Exhibition 29 (EVS29), June 19-22, 2016 "

Copied!
1
0
0

Testo completo

(1)

Publications report by the Student Roberto DI RIENZO, cycle XXX International Conferences/Workshops with Peer Review

[C1] F. Baronti, R. Di Rienzo, N. Papazafiropulos, R. Roncella, R. Saletti: "Investigation of series- parallel connections of multi-module batteries for electrified vehicles," 2014 IEEE International Electric Vehicle Conference (IEVC), pp. 660-666, December 2014

[C2] F. Baronti, R. Di Rienzo, R. Moras, R. Roncella, R. Saletti, G. Pede, F. Vellucci: "Implementation of the fast charging concept for electric local public transport: the case-study of a minibus," 2015 IEEE 13th International Conference on Industrial Informatics (INDIN), pp.1284-1289, July 2015 [C3] R. Morello, W. Zamboni, F. Baronti, R. Di Rienzo, R. Roncella, G. Spagnuolo, R. Saletti:

”Comparison of State and Parameter Estimators for Electric Vehicle Batteries," 41th Annual Conference of the IEEE Industrial Electronics Society - IECON 2015, 9-12November 2015

[C4] F. Vellucci, G. Pede, F. Baronti, R. Di Rienzo, F. Cignini:” Effects of fast charge on a lithium-ion battery system" 2016 Electric Vehicle Symposium & Exhibition 29 (EVS29), June 19-22, 2016

[C5] R. Di Rienzo, F. Baronti, F. Vellucci, F. Cignini, F. Ortenzi, G. Pede, R. Roncella, R. Saletti: ” Experimental Analysis of an Electric Minibus with Small Battery and Fast Charge Policy", Esars Itec 2016, November 2-4, 2016

[C6] R. Morello, R. Di Rienzo, F. Baronti, R. Roncella, R. Saletti: “System on Chip Battery State Es- timator: E-Bike Case Study”, 42th Annual Conference of the IEEE Industrial Elec-tronics Society - IECON 2016, 24-27 October 2016

[C7] R. Morello, F. Baronti, X. Tian, T. Chau, R. Di Rienzo, R. Roncella, B. Jeppesen, W. H. Lin, T.

Ikushima, R. Saletti: “Hardware-in-the-Loop Simulation of FPGA-based State Estimators for Electric Vehi-cle Batteries”, 25th International Symposium on Industrial Electronics (ISIE 2016), 8-10 June 2016

[C8] P. Nannipieri; M. Anichini; L. Barsocchi; G. Becatti; L. Buoni; A. Catarsi; F. Celi; P. Di Giorgio; P.

Fattibene; E. Ferrato; P. Guardati; E. Mancini; G. Meoni; F. Nesti; S. Piaquadio; E. Pratelli; L.

Quadrelli; A. Simone Viglione; F. Zanaboni; C. Bartoli; P. Di Marco; S. Marcuccio; R. Di Rienzo; L.

Fanucci; F. Baronti; M. Mameli; S. Filippeschi: “The U-PHOS experience within the ESA student REXUS/BEXUS programme: A real space hands-on opportunity”, 2017 IEEE Global Engineering Education Conference (EDUCON),

25-28 April 2017.

[C9] R. Morello; R. Di Rienzo; R. Roncella; R. Saletti; F. Baronti: “Tuning of Moving Window Least Squares-based algorithm for online battery parameter estimation”, 2017 14th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD),

12-15 June 2017

[C10] R. Di Rienzo; F. Baronti; R. Roncella; R. Morello; R. Saletti: “Simulation platform for analyzing battery parallelization”, 2017 14th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD), 12-15 June 2017

[C11] R. Di Rienzo, R. Roncella, R. Morello, F. Baronti and R. Saletti, “Low-cost Modular Battery Emulator for Battery Management System Testing,” under review for IESES 2018, Hamilton, New Zeland, 2018.

[C12] G. Litta, R. Di Rienzo, R. Morello, R. Roncella, R. Saletti and F. Baronti, “Flexible platform with

wireless interface for DC-motor remote control,” under review for IESES 2018, Hamilton, New

Zeland, 2018.

Riferimenti

Documenti correlati

The state of health (SOH) of a battery is the energy capacity and the current it can provide without heating up (low increase of the temperature?): this condition

The same data monitored is useful for battery status data evaluation like SoC or SoH, which are good parameters for knowing how much charge can be delivered to single cells, how

From the results obtained it has been possible to notice that the temperature is a determining factor in the functioning of a lithium-ion battery. In fact, the discharged

The result suggests that instead of using metrics such as carbon footprint and primary energy consumption, the environmental benefits of introducing second life and recycling

Moreover, the lithium-ion battery must be equipped with a Battery Management System (BMS), an electronic board that controls the battery behavior to maintain the battery cells in

SOC Estimation of Lithium-Ion Battery Based on Kalman Filter Algorithm for Energy Storage System in Microgrids.. Dae-Won Chung Seung-Hak

The process of creating SiOC@C as an active material involves 2 steps: the synthesis of activated carbon and silicon oxycarbide.. This experiment used three variations

Metodologia Soft Computing per la progettazione ed ottimizzazione di un controllore fuzzy di tipo Sky-Hook per sospensioni semi-attive..