UTILIZZO DEL CODICE TEMPORANEO E RICERCA DI UN PARAMETRO TECNICO
USE OF THE TEMPORARY CODE AND SEARCH FOR A TECHNICAL PARAMETER
UTILIZZO DEL CODICE TEMPORANEO E RICERCA DI UN PARAMETRO TECNICO
Dalla schermata principale premere sull’icona
«MENU»
1. Digitare la Password Tecnico « 2537742 » per poter entrare nel Menù come Tecnico
2. Una volta digitata la password correttamente, premere su «OK» per confermare
1
INSERIMENTO DEL CODICE TEMPORANEO
1. Premere sul cursore come indicato in figura per poter navigare all’interno del Menù Tecnico
2. Al raggiungimento della voce «PASSWORD E INIZIALIZZAZIONI» (parametro 909166), premere su
«OK» per confermare
1
1
1. Premere sul cursore come indicato in figura per poter navigare all’interno del Menù Password e Inizializzazioni.
2. Al raggiungimento della voce « INSERIMENTO CODICE
TEMPORANEO » (parametro 858053), premere su «OK» per
confermare.
1
2
3
1. Comunicare ad IMESA il codice presente all’interno del riquadro giallo
2. Digitare il «controcodice» comunicato da IMESA 3. Premere «OK» per confermare
Una volta inserito il «controcodice» comunicato da IMESA, è possibile notare che:
1. Il colore dello sfondo dello schermo è diventato arancione
2. La modalità di navigazione all’interno del menù è come «AMMINISTRATORE»
NB: LA NAVIGAZIONE ATTRAVERSO QUESTO MENÙ DEVE ESSERE SEMPRE SUPERVISIONATA DA IMESA!!!
1
2
Navigando all’interno del menù in modalità «Amministratore», è possibile ricercare e modificare dei parametri tecnici direttamente utilizzando la lente d’ingrandimento. Vediamo un esempio specifico per la modifica del parametro «WDT CARICO ACQUA» (parametro 109166).
ESEMPIO DI RICERCA DI UN PARAMETRO TECNICO
1
2
3
4
3
1. Premere la lente di ingrandimento
2. Digitare il codice del parametro da voler ricercare e modificare (in questo caso 109166) 3. Premere su «OK» per confermare
4. In automatico si apre la schermata del parametro che si vuole modificare. Impostare il valore desiderato
USE OF THE TEMPORARY CODE AND SEARCH FOR A TECHNICAL PARAMETER
From the main screen, press the “MENU" icon
1. Enter the Technician Password «2537742» to be able to enter the Menu as Technician
2. Once you have entered the password correctly, press on «OK» to confirm
1
ENTERING THE TEMPORARY CODE
1. Press the cursor as shown in the figure to be able to navigate within the Technical Menu
2. Upon reaching the "PASSWORD AND INITIALIZATIONS"
item (parameter 909166), press "OK" to confirm.
1
1
1. Press the cursor as shown in the figure to be able to navigate within the Password and Initializations Menu.
2. Upon reaching the “ENTERING TEMPORARY CODE" item
(parameter 858053), press "OK" to confirm.
1
2
3
1. Comunicate to IMESA the code inside the yellow box 2. Enter the code comunicated by IMESA
3. Press «OK» to confirm
Once the code communicated by IMESA has been entered, It is possible to note that :
1. The background color of the screen has turned orange 2. The navigation mode within the menu is like “ADMIN"
1
2
By browsing the menu in "Admin" mode, you can search and edit technical parameters directly using the magnifying glass. Vediamo un esempio specifico per la modifica del paramentro «WDT CARICO ACQUA»
(parametro 109166).
EXAMPLE OF SEARCHING OF A TECHNICAL PARAMETER
1
2
3
4
3
1. Press the magnifying glass
2. Enter the code of the parameter to be searched and modified (in this case 109166) 3. Press on «OK» to confirm
4. The screen of the parameter to be modified opens automatically. Set the desired value 5. Press on «OK» to confirm.
imesa.it