EdilVENT
INOX - INOX
COASSIALE INOX - INOX
INOX - INOX COAXIAL
276
SISTEMA COASSIALE INOX-INOX EdilVENT INOX - INOX
Il sistema coassiale inox-inox EdilVENT INOX - INOX è composto da elementi componibili rigidi coassiali, realizzati in acciaio inox AISI 316L di spessore minimo 0,4 mm e protetti da una parete esterna in acciaio inox AISI 304, con finitura lucida BA di spessore 0,4 mm, che forma il cavedio di contenimento per la ventilazione semplice e/o l’adduzione dell’aria comburente del generatore, conformi agli standard previsti dalla marcatura CE secondo la normativa EN 1856-1 ed EN 14989-2. Gli elementi modulari hanno innesto classico a bicchiere maschio-femmina calibrato con guarnizione di tenuta a triplice labbro, conforme alla normativa europea EN 14241.
Riferimento normativo e designazione Marcatura prodotto secondo normativa europea CE 0476 EN 1856-1 / EN 14989-2.
T200 P1 W V2 L50040 O 50 con guarnizione T600 N1 W V2 L50040 G 80 senza guarnizione T600 N1 W V2 L50040 G 100
Utilizzo
Sistemi fumari metallici modulari - condotti, canali da fumo, camini metallici, esalazioni aria - asserviti a generatori pressurizzati, ad aria soffiata, tradizionali o a condensazione.
Applicazione
Installazione interna ed esterna.
Per installazioni esterne utilizzare le guarnizioni anche sul tubo esterno.
Diametri disponibili - mm - A RICHIESTA 60/100 - 80/125 - 100/150 - 130/200 - 150/200
Guarnizione in silicone compresa e montata sul tubo interno per i diametri: 60/100 - 80/125 - 100/150
COAXIAL INOX-INOX SYSTEM EdilVENT INOX - INOX
Coaxial inox-inox EdilVENT INOX - INOX system is composed by coaxial modular rigid elements, made of stainless steel AISI 316L, minum thickness 0.4 mm, and protected by an external wall in stainless steel AISI 304, with finish polished BA thickness 0.4 mm, that compose a technical shaft of containment for combustion air supply and/or ventilation system, according to the standards set out by the European CE mark, EN 1856-1 and EN 14989-2. The modular elements have classic male-female junction calibrated with triple seal lip gasket, conforming to European standard EN 14241.
Normative references and designation Product marking according to the European standard CE 0476 EN 1856-1 / EN 14989-2.
T200 P1 W V2 L50040 O 50 with seal T600 N1 W V2 L50040 G 80 without seal T600 N1 W V2 L50040 G 100
Utilizations
Metal flue systems - ducts, flue pipes, metal chimneys, air conduction - subservient to pressurized heat generators, air blown, traditional or condensing system.
Application
Internal and external installation.
For external installations use the seals also on the external pipe.
Available diameters - mm - ON REQUEST 60/100 - 80/125 - 100/150 - 130/200 - 150/200
All the items are complete of silicone seal on inner pipe for diameters: 60/100 - 80/125 - 100/150
EdilVENT INO X - INO X
EdilVENT
INOX • INOX
277
60 80 100 130 150
COD.
EIKCINTA1S060 EIKCINTA1S080 EIKCINTA1S100 EIKCINTA1S130 EIKCINTA1S150
Øi H
940 940 940 940 940 Øe
100 125 150 200 200
A 40 40 40 54 54
60 80 100 130 150
COD.
EIKCINTA5S060 EIKCINTA5S080 EIKCINTA5S100 EIKCINTA5S130 EIKCINTA5S150
Øi H
440 440 440 440 440 Øe
100 125 150 200 200
A 40 40 40 54 54
60 80 100 130 150
COD.
EIKCINTA2S060 EIKCINTA2S080 EIKCINTA2S100 EIKCINTA2S130 EIKCINTA2S150
Øi H
190 190 190 190 190 Øe
100 125 150 200 200
A 40 40 40 54 54
EIKCINTA25S...
EIKCINTA1S... EIKCINTA5S...
Elemento lineare da 1 m.
Pipe 1 m.
Elemento lineare da 0,50 m.
Pipe 0.50 m.
Elemento lineare da 0,25 m.
Pipe 0.25 m.
Finitura ramata esterna a richiesta External kopper finish on request
EdilVENT INO X - INO X
COASSIALE INOX/INOX - INOX/INOX COAXIAL
278
B 60
80 100 130 150
COD.
Øi H
95 98 100 131 140 Øe
100 125 150 200 200
A 145 148 150 181 190
40 40 40 54 54
B B
60 80 100 130 150
COD.
Øi H
98 101 103 134 143 Øe
100 125 150 200 200
A 142 145 147 178 187
40 40 40 54 54 B Elemento telescopico.
Adjustable pipe.
Curva a 87°.
Curva a 90°.
Elbow 87°.
Elbow 90°.
60 80 100 130 150
COD.
Øi H
# 280-400 280-400 280-400 280-400 Øe
100 125 150 200 200
A
# 40 40 54 54
Finitura ramata esterna a richiesta External kopper finish on request
EdilVENT INO X - INO X
Edil VENT INOX • INOX
EIKCINGA87S...
EIKCIEPS4SCO... EIKCINGA90S...
# EIKCIEPS4SCO080
EIKCIEPS4SCO100 EIKCIEPS4SCO130 EIKCIEPS4SCO150
EIKCINGA90S060 EIKCINGA90S080 EIKCINGA90S100 EIKCINGA90S130 EIKCINGA90S150
EIKCINGA87S060 EIKCINGA87S080 EIKCINGA87S100 EIKCINGA87S130 EIKCINGA87S150
Non disponibile Not available
279
Raccordo a “T” 87° con curva interna e uscita coassiale.
Tee 87° with inner elbow and coaxial outlet.
B 60
80 100 130 150
COD.
Øi H
98 105 116 126 134 Øe
100 125 150 200 200
A 40 40 40 54 54
65 68 71 75 78
E B
60 80 100 130 150
COD.
Øi H
270 270 270 440 440 Øe
100 125 150 200 200
A 50 50 50 50 50
40 40 40 54 54 B Raccordo a “T” 87° con uscita coassiale.
Tee 87° with coaxial outlet.
B 60
80 100 130 150
COD.
Øi H
205 270 270 440 440 Øe
100 125 150 200 200
A 40 125 160 250 245
128 128 138 175 200 B
40 40 40 54 54 C Curva a 45°.
Elbow 45°.
Raccordo a T 45°
45° Tee duct Raccordo a T 45°
45° Tee duct
Finitura ramata esterna a richiesta External kopper finish on request
EdilVENT INO X - INO X
COASSIALE INOX/INOX - INOX/INOX COAXIAL
EIKCIN55BCO...
EIKCINGA45S... EIKCIN55CO...
EIKCINGA45S060 EIKCINGA45S080 EIKCINGA45S100 EIKCINGA45S130 EIKCINGA45S150
EIKCIN55CO060 EIKCIN55CO080 EIKCIN55CO100 EIKCIN55CO130 EIKCIN55CO150
EIKCIN55BCO060 EIKCIN55BCO080 EIKCIN55BCO100 EIKCIN55BCO130 EIKCIN55BCO150
280
Disponibile anche con uscita Ø 60 Also available with Ø 60 outputFinitura ramata esterna a richiesta External kopper finish on request
EdilVENT INO X - INO X
Non disponibile Not available
Edil VENT INOX • INOX
Raccordo a “T” 90° con uscita mono Ø 78 mm per aspirazione aria.
Tee 90° reduced Ø 78 mm single wall for air aspiration.
B 60
80 100 130 150
COD.
Øi H
# 195 195 245 245 Øe
100 125 150 200 200
A
# 104 104 124 124
# 108 120 145 145 B
# 40 40 54 54 C
EIKCIN55E...
# EIKCIN55E080 EIKCIN55E100 EIKCIN55E130 EIKCIN55E150
Raccordo a “T” 87° con uscita mono Ø 80 mm femmina per fumi.
Tee 87° reduced Ø 80 mm female single wall for fumes.
B 60
80 100 130 150
COD.
Øi H
# 205 190 190 190 Øe
100 125 150 200 200
A
# 123 123 123 123
# 150 163 188 188 B
# 40 40 54 54 C
EIKCIN55H...
# EIKCIN55H080 EIKCIN55H100 EIKCIN55H130 EIKCIN55H150
Elemento coassiale con presa d’aria Ø 60 mm ed evacuazione fumi femmina monoparete.
Coaxial element with air intake Ø 60 mm and female single wall smoke evacuation.
90°
B 60
80 100 130 150
COD.
Øi H
# 195 195
#
# Øe
100 125 150 200 200
A
# 142 142
#
#
# 50 50
#
# B
# 100 100
#
# C
EIKCINXCIT90U...
# EIKCINXCIT90U08 EIKCINXCIT90U10
#
#
281
B 60
80 100 130 150
COD.
Øi H3
# 130 130
#
# Øe
100 125 150 200 200
H1
# 330 330
#
#
# 80 80
#
# H2 Raccordo a “T” 90° con tappo e prolunga per espulsione fumi e raccordo a “T” 90° liscio per aspirazione aria. Componibili.
Tee 90° with cap and extension for air aspiration and smooth tee 90° for fumes. Modular.
EIKCIN55S...
80 120 200 100
60 H3 H1
H2
# EIKCIN55S080 EIKCIN55S100
#
#
Finitura ramata esterna a richiesta External kopper finish on request
EdilVENT INO X - INO X
COASSIALE INOX/INOX - INOX/INOX COAXIAL
Piastra intermedia.
Intermediate anchor plate.
B 60
80 100 130 150
COD.
Øi H
# 203 189 189 189 Øe
100 125 150 200 200
A
# 230 250 300 300
# 40 40 54 54 B
EIKCINPISS...
Elemento d’ispezione.
Element with round test point.
60 80 100 130 150
COD.
Øi H
205 205 270 270 440 Øe
100 125 150 200 200
A 40 40 40 54 54
EIKCINISPSS...
EIKCINISPSS060 EIKCINISPSS080 EIKCINISPSS100 EIKCINISPSS130 EIKCINISPSS150
# EIKCINPISS080 EIKCINPISS100 EIKCINPISS130 EIKCINPISS150
PRELIEVO ARIA AIR TAKING
ESPULSIONE FUMI SMOKE EVACUATION
Non disponibile Not available A richiesta - TEMPO DI CONSEGNA: 15 GIORNI LAVORATIVI
On request - DELIVERY TYME: 15 WORKING DAYS
282
Finitura ramata esterna a richiesta External kopper finish on request
EdilVENT INO X - INO X
Edil VENT INOX • INOX
D Scarico condensa con doppio attacco.
Tee cap with double condense drain.
60 80 100 130 150
COD.
Øi Øe 100 125 150 200 200
H 65 65 65 65 65
Tappo cieco.
Tee cap.
60 80 100 130 150
COD.
Øi Øe 100 125 150 200 200
H 65 65 65 65 65
EIKCINSCARSS... EIKCITCCO...
EIKCINSCARSS060 EIKCINSCARSS080 EIKCINSCARSS100 EIKCINSCARSS130 EIKCINSCARSS150
EIKCITCCO060 EIKCITCCO080 EIKCITCCO100 EIKCITCCO130 EIKCITCCO150 Elemento per prelievo fumi.
Fumes test section with threaded sleeve.
60 80 100 130 150
COD.
Øi H
# 205 205
#
# Øe
100 125 150 200 200
A
# 40 40
#
#
EIKCINPF...
# EIKCINPF080 EIKCINPF100
#
#
Non disponibile Not available
Fornito con due rosoni in EPDM
283
Supplied with two ceiling fittings in EPDM
Finitura ramata esterna a richiesta External kopper finish on request
EdilVENT INO X - INO X
COASSIALE INOX/INOX - INOX/INOX COAXIAL
Non disponibile Not available Terminale orizzontale con due rosoni.
Smontabile per pulizia.
Horizontal terminal with two ceiling fittings.
Removable for cleaning.
B 60
80 100 130 150
COD.
Øi H
# 990 990 990 990 Øe
100 125 150 200 200
A
# 95 95 95 95
# 40 40 40 40 B Terminale cinese con presa d’aria ribassato.
Short rain cap with air intake.
B 60
80 100 130 150
COD.
Øi H
# 232 232 232 232 Øe
100 125 150 200 200
A
# 140 180 180 180
# 180 230 230 230 B
# 180 200 230 230 C
EIKCICAICO... EIKCIN75C...
# EIKCICAICO080 EIKCICAICO100 EIKCICAICO130 EIKCICAICO150
# EIKCIN75C080 EIKCIN75C100 EIKCIN75C130 EIKCIN75C150 Terminale antivento con presa d’aria.
Anti downdraught terminal with air intake.
B 60
80 100 130 150
COD.
Øi H
421 421 431 431 466 Øe
100 125 150 200 200
A 185 185 185 220 260
165 165 165 165 200 B
EIKCIN75CO...
EIKCIN75CO060 EIKCIN75CO080 EIKCIN75CO100 EIKCIN75CO130 EIKCIN75CO150
284
Finitura ramata esterna a richiesta External kopper finish on request
EdilVENT INO X - INO X
Edil VENT INOX • INOX
COD.
EIKCFT100 EIKCFT125 EIKCFT150 EIKCFT200 EIKCFT200 Collare a muro con tassello.
Wall bracket with anchor bolt.
60 80 100 130 150
Øi Øe 100 125 150 200 200
EIKCFT...
EIKCOLSS100 EIKCOLSS125 EIKCOLSS150 EIKCOLSS200 EIKCOLSS200 60
80 100 130 150
COD.
Øi H
40 40 40 40 40 Øe
100 125 150 200 200
A 50 50 50 50 50 Collare a muro.
Wall bracket.
EIKCOLSS...
In fase di ordine: considerare sempre il diametro esterno della canna fumaria • When ordering: always consider the outside diameter of the flue chimney Guarnizione di tenuta in silicone nero.Silicon black seal.
60 80 100 130 150
COD.
Ø H
10 10 10 10 10
Raccordo a T 45°
45° Tee duct
EIK1GN...
EIK1GN060 EIK1GN080 EIK1GN100 EIK1GN130 EIK1GN150
285
Finitura ramata esterna a richiesta External kopper finish on request
EdilVENT INO X - INO X
Faldale regolabile da 5° a 30° con base in alluminio.
Adjustable flashing from 5° to 30° with aluminum base.
B 60
80 100 130 150
COD.
EIKFPS5SAL100 EIKFPS5SAL125 EIKFPS5SAL150 EIKFPS5SAL200 EIKFPS5SAL200
Øi H
120 150 150 180 180 Øe
100 125 150 200 200
A 750 850 850 1000 1000
450 550 550 650 650 B
Fascetta anti intemperie.
Storm collar.
60 80 100 130 150
COD.
EIKFAPS2S100 EIKFAPS2S125 EIKFAPS2S150 EIKFAPS2S200 EIKFAPS2S200 Øi Øe
100 125 150 200 200
H 100 100 100 100 100
EIKFPS5SAL... EIKFAPS2S...
In fase di ordine: considerare sempre il diametro esterno della canna fumaria • When ordering: always consider the outside diameter of the flue chimneyCOASSIALE INOX/INOX - INOX/INOX COAXIAL
60 80 100 130 150
COD.
EIKCOLSSREG100 EIKCOLSSREG125 EIKCOLSSREG150 EIKCOLSSREG200 EIKCOLSSREG200
Øi H
40 40 40 40 40 Øe
100 125 150 200 200
A 50-100 50-100 50-100 50-100 50-100 Collare a muro regolabile da 50 a 100 mm.
Wall bracket adjustable from 50 to 100 mm.
EIKCOLSSREG...
286
Fascetta di sicurezza alta.
High locking band.
60 80 100 130 150
COD.
# EFASCDC080125F EFASCDC100150F
#
# Øi Øe
100 125 150 200 200
H # 30 30
#
#
Finitura ramata esterna a richiesta External kopper finish on request
EdilVENT INO X - INO X
Non disponibile Not available
Edil VENT INOX • INOX
EFASCDC...F
In fase di ordine: considerare sempre il diametro esterno della canna fumaria • When ordering: always consider the outside diameter of the flue chimney Fascetta di sicurezza.Locking band.
60 80 100 130 150
COD.
EIKFACSS100 EIKFACSS125 EIKFACSS150 EIKFACSS200 EIKFACSS200 Øi Øe
100 125 150 200 200
H 20 20 20 20 20
EIKFACSS...
COD.
EIKLUBGN
Lubrificante per guarnizione.
Lubricant for seal.
EIKLUBGN
80
COD.
EIKITCI080 Øi Øe
125
???
EIKITCI080
KIT coassiale.
Coaxial KIT.
Contiene / Contains Tubo 1 m Pipe 1 m Tubo 0,50 m Pipe 0.50 m
Tubo flex in alluminio Ø 60 Aluminum flex pipe Ø 60 Curva a 90°
90° elbow
T a 90° per aria / fumi 90° tee for air / smokes Fascette di sicurezza Ø 80/125 Locking bands Ø 80/125 Terminale orizzontale Horizontal terminal 1
1 1
1 1 6 1